Merge tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux

Optional properties:

- arm,primecell-periphid : Value to override the h/w value with

- clocks : From common clock binding. First clock is phandle to clock for apb

	pclk. Additional clocks are optional and specific to those peripherals.

- clock-names : From common clock binding. Shall be "apb_pclk" for first clock.

Example:

serial@fff36000 {

	compatible = "arm,pl011", "arm,primecell";

	arm,primecell-periphid = <0x00341011>;

	clocks = <&pclk>;

	clock-names = "apb_pclk";

};

Device Tree Clock bindings for Calxeda highbank platform

This binding uses the common clock binding[1].

[1] Documentation/devicetree/bindings/clock/clock-bindings.txt

Required properties:

- compatible : shall be one of the following:

	"calxeda,hb-pll-clock" - for a PLL clock

	"calxeda,hb-a9periph-clock" - The A9 peripheral clock divided from the

		A9 clock.

	"calxeda,hb-a9bus-clock" - The A9 bus clock divided from the A9 clock.

	"calxeda,hb-emmc-clock" - Divided clock for MMC/SD controller.

- reg : shall be the control register offset from SYSREGs base for the clock.

- clocks : shall be the input parent clock phandle for the clock. This is

	either an oscillator or a pll output.

- #clock-cells : from common clock binding; shall be set to 0.

This binding is a work-in-progress, and are based on some experimental

work by benh[1].

Sources of clock signal can be represented by any node in the device

tree.  Those nodes are designated as clock providers.  Clock consumer

nodes use a phandle and clock specifier pair to connect clock provider

outputs to clock inputs.  Similar to the gpio specifiers, a clock

specifier is an array of one more more cells identifying the clock

output on a device.  The length of a clock specifier is defined by the

value of a #clock-cells property in the clock provider node.

[1] http://patchwork.ozlabs.org/patch/31551/

==Clock providers==

Required properties:

#clock-cells:	   Number of cells in a clock specifier; Typically 0 for nodes

		   with a single clock output and 1 for nodes with multiple

		   clock outputs.

Optional properties:

clock-output-names: Recommended to be a list of strings of clock output signal

		    names indexed by the first cell in the clock specifier.

		    However, the meaning of clock-output-names is domain

		    specific to the clock provider, and is only provided to

		    encourage using the same meaning for the majority of clock

		    providers.  This format may not work for clock providers

		    using a complex clock specifier format.  In those cases it

		    is recommended to omit this property and create a binding

		    specific names property.

		    Clock consumer nodes must never directly reference

		    the provider's clock-output-names property.

For example:

    oscillator {

        #clock-cells = <1>;

        clock-output-names = "ckil", "ckih";

    };

- this node defines a device with two clock outputs, the first named

  "ckil" and the second named "ckih".  Consumer nodes always reference

  clocks by index. The names should reflect the clock output signal

  names for the device.

==Clock consumers==

Required properties:

clocks:		List of phandle and clock specifier pairs, one pair

		for each clock input to the device.  Note: if the

		clock provider specifies '0' for #clock-cells, then

		only the phandle portion of the pair will appear.

Optional properties:

clock-names:	List of clock input name strings sorted in the same

		order as the clocks property.  Consumers drivers

		will use clock-names to match clock input names

		with clocks specifiers.

clock-ranges:	Empty property indicating that child nodes can inherit named

		clocks from this node. Useful for bus nodes to provide a

		clock to their children.

For example:

    device {

        clocks = <&osc 1>, <&ref 0>;

        clock-names = "baud", "register";

    };

This represents a device with two clock inputs, named "baud" and "register".

The baud clock is connected to output 1 of the &osc device, and the register

clock is connected to output 0 of the &ref.

==Example==

    /* external oscillator */

    osc: oscillator {

        compatible = "fixed-clock";

        #clock-cells = <1>;

        clock-frequency  = <32678>;

        clock-output-names = "osc";

    };

    /* phase-locked-loop device, generates a higher frequency clock

     * from the external oscillator reference */

    pll: pll@4c000 {

        compatible = "vendor,some-pll-interface"

        #clock-cells = <1>;

        clocks = <&osc 0>;

        clock-names = "ref";

        reg = <0x4c000 0x1000>;

        clock-output-names = "pll", "pll-switched";

    };

    /* UART, using the low frequency oscillator for the baud clock,

     * and the high frequency switched PLL output for register

     * clocking */

    uart@a000 {

        compatible = "fsl,imx-uart";

        reg = <0xa000 0x1000>;

        interrupts = <33>;

        clocks = <&osc 0>, <&pll 1>;

        clock-names = "baud", "register";

    };

This DT fragment defines three devices: an external oscillator to provide a

low-frequency reference clock, a PLL device to generate a higher frequency

clock signal, and a UART.

* The oscillator is fixed-frequency, and provides one clock output, named "osc".

* The PLL is both a clock provider and a clock consumer. It uses the clock

  signal generated by the external oscillator, and provides two output signals

  ("pll" and "pll-switched").

* The UART has its baud clock connected the external oscillator and its

  register clock connected to the PLL clock (the "pll-switched" signal)

Binding for simple fixed-rate clock sources.

This binding uses the common clock binding[1].

[1] Documentation/devicetree/bindings/clock/clock-bindings.txt

Required properties:

- compatible : shall be "fixed-clock".

- #clock-cells : from common clock binding; shall be set to 0.

- clock-frequency : frequency of clock in Hz. Should be a single cell.

Optional properties:

- gpios : From common gpio binding; gpio connection to clock enable pin.

- clock-output-names : From common clock binding.

Example:

	clock {

		compatible = "fixed-clock";

		#clock-cells = <0>;

		clock-frequency = <1000000000>;

	};

S:	Supported

F:	Documentation/hwmon/wm83??

F:	arch/arm/mach-s3c64xx/mach-crag6410*

F:	drivers/clk/clk-wm83*.c

F:	drivers/leds/leds-wm83*.c

F:	drivers/hwmon/wm83??-hwmon.c

F:	drivers/input/misc/wm831x-on.c