Commit 902f392d authored by Vitaly Bordug's avatar Vitaly Bordug
Browse files

POWERPC: Add support for the mpc8560 eval board 



This makes the 8560 evaluation board fully supported under arch/powerpc,
as the first board with CPM2 SoC peripherals. The brand new devicetree
nodes are introduced (intending to be a subset of the QuiccEngine-equipped
models, with dts sources placed into the kernel according to the new convention.

Assuming all the preceding stuff applied (PAL+fs_enet related+ CPM_UART
update), the both TSEC eth ,FCC Eths, and both SCC UARTs are
working. The relevant drivers are still capable to drive users in ppc,
which was verified with 8272ADS (SCC uart+FCC eth).

This is also verified on mpc8540 and actually make it work (PCI stuff
working as well)

Signed-off-by: default avatarVitaly Bordug <vbordug@ru.mvista.com>
parent b0c110b4

arch/powerpc/boot/dts/mpc8560ads.dts

0 → 100644
+302 −0
Original line number Diff line number Diff line 
/*

 * MPC8560 ADS Device Tree Source

 *

 * Copyright 2006 Freescale Semiconductor Inc.

 *

 * This program is free software; you can redistribute  it and/or modify it

 * under  the terms of  the GNU General  Public License as published by the

 * Free Software Foundation;  either version 2 of the  License, or (at your

 * option) any later version.

 */





/ {

	model = "MPC8560ADS";

	compatible = "MPC85xxADS";

	#address-cells = <1>;

	#size-cells = <1>;

	linux,phandle = <100>;



	cpus {

		#cpus = <1>;

		#address-cells = <1>;

		#size-cells = <0>;

		linux,phandle = <200>;



		PowerPC,8560@0 {

			device_type = "cpu";

			reg = <0>;

			d-cache-line-size = <20>;	// 32 bytes

			i-cache-line-size = <20>;	// 32 bytes

			d-cache-size = <8000>;		// L1, 32K

			i-cache-size = <8000>;		// L1, 32K

			timebase-frequency = <04ead9a0>;

			bus-frequency = <13ab6680>;

			clock-frequency = <312c8040>;

			32-bit;

			linux,phandle = <201>;

			linux,boot-cpu;

		};

	};



	memory {

		device_type = "memory";

		linux,phandle = <300>;

		reg = <00000000 10000000>;

	};



	soc8560@e0000000 {

		#address-cells = <1>;

		#size-cells = <1>;

		#interrupt-cells = <2>;

		device_type = "soc";

		ranges = <0 e0000000 00100000>;

		reg = <e0000000 00000200>;

		bus-frequency = <13ab6680>;



		mdio@24520 {

			device_type = "mdio";

			compatible = "gianfar";

			reg = <24520 20>;

			linux,phandle = <24520>;

			#address-cells = <1>;

			#size-cells = <0>;

			ethernet-phy@0 {

				linux,phandle = <2452000>;

				interrupt-parent = <40000>;

				interrupts = <35 1>;

				reg = <0>;

				device_type = "ethernet-phy";

			};

			ethernet-phy@1 {

				linux,phandle = <2452001>;

				interrupt-parent = <40000>;

				interrupts = <35 1>;

				reg = <1>;

				device_type = "ethernet-phy";

			};

			ethernet-phy@2 {

				linux,phandle = <2452002>;

				interrupt-parent = <40000>;

				interrupts = <37 1>;

				reg = <2>;

				device_type = "ethernet-phy";

			};

			ethernet-phy@3 {

				linux,phandle = <2452003>;

				interrupt-parent = <40000>;

				interrupts = <37 1>;

				reg = <3>;

				device_type = "ethernet-phy";

			};

		};



		ethernet@24000 {

			device_type = "network";

			model = "TSEC";

			compatible = "gianfar";

			reg = <24000 1000>;

			address = [ 00 00 0C 00 00 FD ];

			interrupts = <d 2 e 2 12 2>;

			interrupt-parent = <40000>;

			phy-handle = <2452000>;

		};



		ethernet@25000 {

			#address-cells = <1>;

			#size-cells = <0>;

			device_type = "network";

			model = "TSEC";

			compatible = "gianfar";

			reg = <25000 1000>;

			address = [ 00 00 0C 00 01 FD ];

			interrupts = <13 2 14 2 18 2>;

			interrupt-parent = <40000>;

			phy-handle = <2452001>;

		};



		pci@8000 {

			linux,phandle = <8000>;

			#interrupt-cells = <1>;

			#size-cells = <2>;

			#address-cells = <3>;

			compatible = "85xx";

			device_type = "pci";

			reg = <8000 400>;

			clock-frequency = <3f940aa>;

			interrupt-map-mask = <f800 0 0 7>;

			interrupt-map = <



					/* IDSEL 0x2 */

					 1000 0 0 1 40000 31 1

					 1000 0 0 2 40000 32 1

					 1000 0 0 3 40000 33 1

					 1000 0 0 4 40000 34 1



					/* IDSEL 0x3 */

					 1800 0 0 1 40000 34 1

					 1800 0 0 2 40000 31 1

					 1800 0 0 3 40000 32 1

					 1800 0 0 4 40000 33 1



					/* IDSEL 0x4 */

					 2000 0 0 1 40000 33 1

					 2000 0 0 2 40000 34 1

					 2000 0 0 3 40000 31 1

					 2000 0 0 4 40000 32 1



					/* IDSEL 0x5  */

					 2800 0 0 1 40000 32 1

					 2800 0 0 2 40000 33 1

					 2800 0 0 3 40000 34 1

					 2800 0 0 4 40000 31 1



					/* IDSEL 12 */

					 6000 0 0 1 40000 31 1

					 6000 0 0 2 40000 32 1

					 6000 0 0 3 40000 33 1

					 6000 0 0 4 40000 34 1



					/* IDSEL 13 */

					 6800 0 0 1 40000 34 1

					 6800 0 0 2 40000 31 1

					 6800 0 0 3 40000 32 1

					 6800 0 0 4 40000 33 1



					/* IDSEL 14*/

					 7000 0 0 1 40000 33 1

					 7000 0 0 2 40000 34 1

					 7000 0 0 3 40000 31 1

					 7000 0 0 4 40000 32 1



					/* IDSEL 15 */

					 7800 0 0 1 40000 32 1

					 7800 0 0 2 40000 33 1

					 7800 0 0 3 40000 34 1

					 7800 0 0 4 40000 31 1



					/* IDSEL 18 */

					 9000 0 0 1 40000 31 1

					 9000 0 0 2 40000 32 1

					 9000 0 0 3 40000 33 1

					 9000 0 0 4 40000 34 1



					/* IDSEL 19 */

					 9800 0 0 1 40000 34 1

					 9800 0 0 2 40000 31 1

					 9800 0 0 3 40000 32 1

					 9800 0 0 4 40000 33 1



					/* IDSEL 20 */

					 a000 0 0 1 40000 33 1

					 a000 0 0 2 40000 34 1

					 a000 0 0 3 40000 31 1

					 a000 0 0 4 40000 32 1



					/* IDSEL 21 */

					 a800 0 0 1 40000 32 1

					 a800 0 0 2 40000 33 1

					 a800 0 0 3 40000 34 1

					 a800 0 0 4 40000 31 1>;



			interrupt-parent = <40000>;

			interrupts = <42 0>;

			bus-range = <0 0>;

			ranges = <02000000 0 80000000 80000000 0 20000000

				  01000000 0 00000000 e2000000 0 01000000>;

		};



		pic@40000 {

			linux,phandle = <40000>;

			interrupt-controller;

			#address-cells = <0>;

			#interrupt-cells = <2>;

			reg = <40000 20100>;

			built-in;

			device_type = "open-pic";

		};



		cpm@e0000000 {

			linux,phandle = <e0000000>;

			#address-cells = <1>;

			#size-cells = <1>;

			#interrupt-cells = <2>;

			device_type = "cpm";

			model = "CPM2";

			ranges = <0 0 c0000>;

			reg = <80000 40000>;

			command-proc = <919c0>;

			brg-frequency = <9d5b340>;



			pic@90c00 {

				linux,phandle = <90c00>;

				interrupt-controller;

				#address-cells = <0>;

				#interrupt-cells = <2>;

				interrupts = <1e 0>;

				interrupt-parent = <40000>;

				reg = <90c00 80>;

				built-in;

				device_type = "cpm-pic";

			};



			scc@91a00 {

				device_type = "serial";

				compatible = "cpm_uart";

				model = "SCC";

				device-id = <2>;

				reg = <91a00 20 88000 100>;

				clock-setup = <00ffffff 0>;

				rx-clock = <1>;

				tx-clock = <1>;

				current-speed = <1c200>;

				interrupts = <64 1>;

				interrupt-parent = <90c00>;

			};



			scc@91a20 {

				device_type = "serial";

				compatible = "cpm_uart";

				model = "SCC";

				device-id = <3>;

				reg = <91a20 20 88100 100>;

				clock-setup = <ff00ffff 90000>;

				rx-clock = <2>;

				tx-clock = <2>;

				current-speed = <1c200>;

				interrupts = <65 1>;

				interrupt-parent = <90c00>;

			};



			fcc@91320 {

				device_type = "network";

				compatible = "fs_enet";

				model = "FCC";

				device-id = <3>;

				reg = <91320 20 88500 100 913a0 30>;

				mac-address = [ 00 00 0C 00 02 FD ];

				clock-setup = <ff00ffff 250000>;

				rx-clock = <15>;

				tx-clock = <16>;

				interrupts = <5d 1>;

				interrupt-parent = <90c00>;

				phy-handle = <2452002>;

			};



			fcc@91340 {

				device_type = "network";

				compatible = "fs_enet";

				model = "FCC";

				device-id = <4>;

				reg = <91340 20 88600 100 913d0 30>;

				mac-address = [ 00 00 0C 00 03 FD ];

				clock-setup = <ffff00ff 3700>;

				rx-clock = <17>;

				tx-clock = <18>;

				interrupts = <5e 1>;

				interrupt-parent = <90c00>;

				phy-handle = <2452003>;

			};

		};

	};

};

arch/powerpc/configs/mpc8560_ads_defconfig

0 → 100644
+854 −0
Original line number Diff line number Diff line 
#

# Automatically generated make config: don't edit

# Linux kernel version: 2.6.18-rc4

# Fri Aug 11 16:45:05 2006

#

# CONFIG_PPC64 is not set

CONFIG_PPC32=y

CONFIG_PPC_MERGE=y

CONFIG_MMU=y

CONFIG_GENERIC_HARDIRQS=y

CONFIG_IRQ_PER_CPU=y

CONFIG_RWSEM_XCHGADD_ALGORITHM=y

CONFIG_GENERIC_HWEIGHT=y

CONFIG_GENERIC_CALIBRATE_DELAY=y

CONFIG_GENERIC_FIND_NEXT_BIT=y

CONFIG_PPC=y

CONFIG_EARLY_PRINTK=y

CONFIG_GENERIC_NVRAM=y

CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y

CONFIG_ARCH_MAY_HAVE_PC_FDC=y

CONFIG_PPC_OF=y

# CONFIG_PPC_UDBG_16550 is not set

# CONFIG_GENERIC_TBSYNC is not set

CONFIG_DEFAULT_UIMAGE=y



#

# Processor support

#

# CONFIG_CLASSIC32 is not set

# CONFIG_PPC_52xx is not set

# CONFIG_PPC_82xx is not set

# CONFIG_PPC_83xx is not set

CONFIG_PPC_85xx=y

# CONFIG_PPC_86xx is not set

# CONFIG_40x is not set

# CONFIG_44x is not set

# CONFIG_8xx is not set

# CONFIG_E200 is not set

CONFIG_85xx=y

CONFIG_E500=y

CONFIG_BOOKE=y

CONFIG_FSL_BOOKE=y

# CONFIG_PHYS_64BIT is not set

CONFIG_SPE=y

CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"



#

# Code maturity level options

#

CONFIG_EXPERIMENTAL=y

CONFIG_BROKEN_ON_SMP=y

CONFIG_INIT_ENV_ARG_LIMIT=32



#

# General setup

#

CONFIG_LOCALVERSION=""

CONFIG_LOCALVERSION_AUTO=y

CONFIG_SWAP=y

CONFIG_SYSVIPC=y

# CONFIG_POSIX_MQUEUE is not set

# CONFIG_BSD_PROCESS_ACCT is not set

# CONFIG_TASKSTATS is not set

CONFIG_SYSCTL=y

# CONFIG_AUDIT is not set

# CONFIG_IKCONFIG is not set

# CONFIG_RELAY is not set

CONFIG_INITRAMFS_SOURCE=""

# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set

CONFIG_EMBEDDED=y

CONFIG_KALLSYMS=y

# CONFIG_KALLSYMS_ALL is not set

# CONFIG_KALLSYMS_EXTRA_PASS is not set

CONFIG_HOTPLUG=y

CONFIG_PRINTK=y

CONFIG_BUG=y

CONFIG_ELF_CORE=y

CONFIG_BASE_FULL=y

CONFIG_RT_MUTEXES=y

CONFIG_FUTEX=y

CONFIG_EPOLL=y

CONFIG_SHMEM=y

CONFIG_SLAB=y

CONFIG_VM_EVENT_COUNTERS=y

# CONFIG_TINY_SHMEM is not set

CONFIG_BASE_SMALL=0

# CONFIG_SLOB is not set



#

# Loadable module support

#

# CONFIG_MODULES is not set



#

# Block layer

#

# CONFIG_LBD is not set

# CONFIG_BLK_DEV_IO_TRACE is not set

# CONFIG_LSF is not set



#

# IO Schedulers

#

CONFIG_IOSCHED_NOOP=y

CONFIG_IOSCHED_AS=y

CONFIG_IOSCHED_DEADLINE=y

CONFIG_IOSCHED_CFQ=y

CONFIG_DEFAULT_AS=y

# CONFIG_DEFAULT_DEADLINE is not set

# CONFIG_DEFAULT_CFQ is not set

# CONFIG_DEFAULT_NOOP is not set

CONFIG_DEFAULT_IOSCHED="anticipatory"

CONFIG_MPIC=y

CONFIG_CPM2=y

# CONFIG_WANT_EARLY_SERIAL is not set



#

# Platform support

#

# CONFIG_MPC8540_ADS is not set

CONFIG_MPC8560_ADS=y

# CONFIG_MPC85xx_CDS is not set

CONFIG_MPC8560=y

CONFIG_PPC_INDIRECT_PCI_BE=y



#

# Kernel options

#

# CONFIG_HIGHMEM is not set

# CONFIG_HZ_100 is not set

CONFIG_HZ_250=y

# CONFIG_HZ_1000 is not set

CONFIG_HZ=250

CONFIG_PREEMPT_NONE=y

# CONFIG_PREEMPT_VOLUNTARY is not set

# CONFIG_PREEMPT is not set

CONFIG_BINFMT_ELF=y

CONFIG_BINFMT_MISC=y

# CONFIG_MATH_EMULATION is not set

CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

# CONFIG_PC_KEYBOARD is not set

CONFIG_ARCH_FLATMEM_ENABLE=y

CONFIG_SELECT_MEMORY_MODEL=y

CONFIG_FLATMEM_MANUAL=y

# CONFIG_DISCONTIGMEM_MANUAL is not set

# CONFIG_SPARSEMEM_MANUAL is not set

CONFIG_FLATMEM=y

CONFIG_FLAT_NODE_MEM_MAP=y

# CONFIG_SPARSEMEM_STATIC is not set

CONFIG_SPLIT_PTLOCK_CPUS=4

# CONFIG_RESOURCES_64BIT is not set

# CONFIG_PROC_DEVICETREE is not set

# CONFIG_CMDLINE_BOOL is not set

# CONFIG_PM is not set

# CONFIG_SOFTWARE_SUSPEND is not set

# CONFIG_SECCOMP is not set

CONFIG_ISA_DMA_API=y



#

# Bus options

#

# CONFIG_PPC_I8259 is not set

CONFIG_PPC_INDIRECT_PCI=y

CONFIG_FSL_SOC=y

CONFIG_PCI=y

CONFIG_PCI_DOMAINS=y

# CONFIG_PCIEPORTBUS is not set

CONFIG_PCI_DEBUG=y



#

# PCCARD (PCMCIA/CardBus) support

#

# CONFIG_PCCARD is not set



#

# PCI Hotplug Support

#

# CONFIG_HOTPLUG_PCI is not set



#

# Advanced setup

#

# CONFIG_ADVANCED_OPTIONS is not set



#

# Default settings for advanced configuration options are used

#

CONFIG_HIGHMEM_START=0xfe000000

CONFIG_LOWMEM_SIZE=0x30000000

CONFIG_KERNEL_START=0xc0000000

CONFIG_TASK_SIZE=0x80000000

CONFIG_BOOT_LOAD=0x00800000



#

# Networking

#

CONFIG_NET=y



#

# Networking options

#

# CONFIG_NETDEBUG is not set

CONFIG_PACKET=y

# CONFIG_PACKET_MMAP is not set

CONFIG_UNIX=y

CONFIG_XFRM=y

# CONFIG_XFRM_USER is not set

# CONFIG_NET_KEY is not set

CONFIG_INET=y

CONFIG_IP_MULTICAST=y

# CONFIG_IP_ADVANCED_ROUTER is not set

CONFIG_IP_FIB_HASH=y

CONFIG_IP_PNP=y

CONFIG_IP_PNP_DHCP=y

CONFIG_IP_PNP_BOOTP=y

# CONFIG_IP_PNP_RARP is not set

# CONFIG_NET_IPIP is not set

# CONFIG_NET_IPGRE is not set

# CONFIG_IP_MROUTE is not set

# CONFIG_ARPD is not set

CONFIG_SYN_COOKIES=y

# CONFIG_INET_AH is not set

# CONFIG_INET_ESP is not set

# CONFIG_INET_IPCOMP is not set

# CONFIG_INET_XFRM_TUNNEL is not set

# CONFIG_INET_TUNNEL is not set

CONFIG_INET_XFRM_MODE_TRANSPORT=y

CONFIG_INET_XFRM_MODE_TUNNEL=y

CONFIG_INET_DIAG=y

CONFIG_INET_TCP_DIAG=y

# CONFIG_TCP_CONG_ADVANCED is not set

CONFIG_TCP_CONG_BIC=y

# CONFIG_IPV6 is not set

# CONFIG_INET6_XFRM_TUNNEL is not set

# CONFIG_INET6_TUNNEL is not set

# CONFIG_NETWORK_SECMARK is not set

# CONFIG_NETFILTER is not set



#

# DCCP Configuration (EXPERIMENTAL)

#

# CONFIG_IP_DCCP is not set



#

# SCTP Configuration (EXPERIMENTAL)

#

# CONFIG_IP_SCTP is not set



#

# TIPC Configuration (EXPERIMENTAL)

#

# CONFIG_TIPC is not set

# CONFIG_ATM is not set

# CONFIG_BRIDGE is not set

# CONFIG_VLAN_8021Q is not set

# CONFIG_DECNET is not set

# CONFIG_LLC2 is not set

# CONFIG_IPX is not set

# CONFIG_ATALK is not set

# CONFIG_X25 is not set

# CONFIG_LAPB is not set

# CONFIG_NET_DIVERT is not set

# CONFIG_ECONET is not set

# CONFIG_WAN_ROUTER is not set



#

# QoS and/or fair queueing

#

# CONFIG_NET_SCHED is not set



#

# Network testing

#

# CONFIG_NET_PKTGEN is not set

# CONFIG_HAMRADIO is not set

# CONFIG_IRDA is not set

# CONFIG_BT is not set

# CONFIG_IEEE80211 is not set



#

# Device Drivers

#



#

# Generic Driver Options

#

CONFIG_STANDALONE=y

CONFIG_PREVENT_FIRMWARE_BUILD=y

# CONFIG_FW_LOADER is not set

# CONFIG_DEBUG_DRIVER is not set

# CONFIG_SYS_HYPERVISOR is not set



#

# Connector - unified userspace <-> kernelspace linker

#

# CONFIG_CONNECTOR is not set



#

# Memory Technology Devices (MTD)

#

# CONFIG_MTD is not set



#

# Parallel port support

#

# CONFIG_PARPORT is not set



#

# Plug and Play support

#



#

# Block devices

#

# CONFIG_BLK_DEV_FD is not set

# CONFIG_BLK_CPQ_DA is not set

# CONFIG_BLK_CPQ_CISS_DA is not set

# CONFIG_BLK_DEV_DAC960 is not set

# CONFIG_BLK_DEV_UMEM is not set

# CONFIG_BLK_DEV_COW_COMMON is not set

CONFIG_BLK_DEV_LOOP=y

# CONFIG_BLK_DEV_CRYPTOLOOP is not set

# CONFIG_BLK_DEV_NBD is not set

# CONFIG_BLK_DEV_SX8 is not set

CONFIG_BLK_DEV_RAM=y

CONFIG_BLK_DEV_RAM_COUNT=16

CONFIG_BLK_DEV_RAM_SIZE=32768

CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024

CONFIG_BLK_DEV_INITRD=y

# CONFIG_CDROM_PKTCDVD is not set

# CONFIG_ATA_OVER_ETH is not set



#

# ATA/ATAPI/MFM/RLL support

#

# CONFIG_IDE is not set



#

# SCSI device support

#

# CONFIG_RAID_ATTRS is not set

# CONFIG_SCSI is not set



#

# Multi-device support (RAID and LVM)

#

# CONFIG_MD is not set



#

# Fusion MPT device support

#

# CONFIG_FUSION is not set



#

# IEEE 1394 (FireWire) support

#

# CONFIG_IEEE1394 is not set



#

# I2O device support

#

# CONFIG_I2O is not set



#

# Macintosh device drivers

#

# CONFIG_WINDFARM is not set



#

# Network device support

#

CONFIG_NETDEVICES=y

# CONFIG_DUMMY is not set

# CONFIG_BONDING is not set

# CONFIG_EQUALIZER is not set

# CONFIG_TUN is not set



#

# ARCnet devices

#

# CONFIG_ARCNET is not set



#

# PHY device support

#

CONFIG_PHYLIB=y



#

# MII PHY device drivers

#

CONFIG_MARVELL_PHY=y

CONFIG_DAVICOM_PHY=y

# CONFIG_QSEMI_PHY is not set

# CONFIG_LXT_PHY is not set

# CONFIG_CICADA_PHY is not set

# CONFIG_VITESSE_PHY is not set

# CONFIG_SMSC_PHY is not set

# CONFIG_FIXED_PHY is not set



#

# Ethernet (10 or 100Mbit)

#

CONFIG_NET_ETHERNET=y

CONFIG_MII=y

# CONFIG_HAPPYMEAL is not set

# CONFIG_SUNGEM is not set

# CONFIG_CASSINI is not set

# CONFIG_NET_VENDOR_3COM is not set



#

# Tulip family network device support

#

# CONFIG_NET_TULIP is not set

# CONFIG_HP100 is not set

# CONFIG_NET_PCI is not set

CONFIG_FS_ENET=y

# CONFIG_FS_ENET_HAS_SCC is not set

CONFIG_FS_ENET_HAS_FCC=y



#

# Ethernet (1000 Mbit)

#

# CONFIG_ACENIC is not set

# CONFIG_DL2K is not set

CONFIG_E1000=y

CONFIG_E1000_NAPI=y

# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set

# CONFIG_NS83820 is not set

# CONFIG_HAMACHI is not set

# CONFIG_YELLOWFIN is not set

# CONFIG_R8169 is not set

# CONFIG_SIS190 is not set

# CONFIG_SKGE is not set

# CONFIG_SKY2 is not set

# CONFIG_SK98LIN is not set

# CONFIG_TIGON3 is not set

# CONFIG_BNX2 is not set

CONFIG_GIANFAR=y

CONFIG_GFAR_NAPI=y



#

# Ethernet (10000 Mbit)

#

# CONFIG_CHELSIO_T1 is not set

# CONFIG_IXGB is not set

# CONFIG_S2IO is not set

# CONFIG_MYRI10GE is not set



#

# Token Ring devices

#

# CONFIG_TR is not set



#

# Wireless LAN (non-hamradio)

#

# CONFIG_NET_RADIO is not set



#

# Wan interfaces

#

# CONFIG_WAN is not set

# CONFIG_FDDI is not set

# CONFIG_HIPPI is not set

# CONFIG_PPP is not set

# CONFIG_SLIP is not set

# CONFIG_SHAPER is not set

# CONFIG_NETCONSOLE is not set

# CONFIG_NETPOLL is not set

# CONFIG_NET_POLL_CONTROLLER is not set



#

# ISDN subsystem

#

# CONFIG_ISDN is not set



#

# Telephony Support

#

# CONFIG_PHONE is not set



#

# Input device support

#

CONFIG_INPUT=y



#

# Userland interfaces

#

# CONFIG_INPUT_MOUSEDEV is not set

# CONFIG_INPUT_JOYDEV is not set

# CONFIG_INPUT_TSDEV is not set

# CONFIG_INPUT_EVDEV is not set

# CONFIG_INPUT_EVBUG is not set



#

# Input Device Drivers

#

# CONFIG_INPUT_KEYBOARD is not set

# CONFIG_INPUT_MOUSE is not set

# CONFIG_INPUT_JOYSTICK is not set

# CONFIG_INPUT_TOUCHSCREEN is not set

# CONFIG_INPUT_MISC is not set



#

# Hardware I/O ports

#

# CONFIG_SERIO is not set

# CONFIG_GAMEPORT is not set



#

# Character devices

#

# CONFIG_VT is not set

# CONFIG_SERIAL_NONSTANDARD is not set



#

# Serial drivers

#

# CONFIG_SERIAL_8250 is not set



#

# Non-8250 serial port support

#

CONFIG_SERIAL_CORE=y

CONFIG_SERIAL_CORE_CONSOLE=y

CONFIG_SERIAL_CPM=y

CONFIG_SERIAL_CPM_CONSOLE=y

CONFIG_SERIAL_CPM_SCC1=y

CONFIG_SERIAL_CPM_SCC2=y

# CONFIG_SERIAL_CPM_SCC3 is not set

# CONFIG_SERIAL_CPM_SCC4 is not set

# CONFIG_SERIAL_CPM_SMC1 is not set

# CONFIG_SERIAL_CPM_SMC2 is not set

# CONFIG_SERIAL_JSM is not set

CONFIG_UNIX98_PTYS=y

CONFIG_LEGACY_PTYS=y

CONFIG_LEGACY_PTY_COUNT=256

# CONFIG_BRIQ_PANEL is not set



#

# IPMI

#

# CONFIG_IPMI_HANDLER is not set



#

# Watchdog Cards

#

# CONFIG_WATCHDOG is not set

CONFIG_HW_RANDOM=y

# CONFIG_NVRAM is not set

CONFIG_GEN_RTC=y

# CONFIG_GEN_RTC_X is not set

# CONFIG_DTLK is not set

# CONFIG_R3964 is not set

# CONFIG_APPLICOM is not set



#

# Ftape, the floppy tape device driver

#

# CONFIG_AGP is not set

# CONFIG_DRM is not set

# CONFIG_RAW_DRIVER is not set



#

# TPM devices

#

# CONFIG_TCG_TPM is not set

# CONFIG_TELCLOCK is not set



#

# I2C support

#

# CONFIG_I2C is not set



#

# SPI support

#

# CONFIG_SPI is not set

# CONFIG_SPI_MASTER is not set



#

# Dallas's 1-wire bus

#



#

# Hardware Monitoring support

#

CONFIG_HWMON=y

# CONFIG_HWMON_VID is not set

# CONFIG_SENSORS_ABITUGURU is not set

# CONFIG_SENSORS_F71805F is not set

# CONFIG_HWMON_DEBUG_CHIP is not set



#

# Misc devices

#



#

# Multimedia devices

#

# CONFIG_VIDEO_DEV is not set

CONFIG_VIDEO_V4L2=y



#

# Digital Video Broadcasting Devices

#

# CONFIG_DVB is not set



#

# Graphics support

#

CONFIG_FIRMWARE_EDID=y

# CONFIG_FB is not set

# CONFIG_BACKLIGHT_LCD_SUPPORT is not set



#

# Sound

#

# CONFIG_SOUND is not set



#

# USB support

#

CONFIG_USB_ARCH_HAS_HCD=y

CONFIG_USB_ARCH_HAS_OHCI=y

CONFIG_USB_ARCH_HAS_EHCI=y

# CONFIG_USB is not set



#

# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'

#



#

# USB Gadget Support

#

# CONFIG_USB_GADGET is not set



#

# MMC/SD Card support

#

# CONFIG_MMC is not set



#

# LED devices

#

# CONFIG_NEW_LEDS is not set



#

# LED drivers

#



#

# LED Triggers

#



#

# InfiniBand support

#

# CONFIG_INFINIBAND is not set



#

# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)

#



#

# Real Time Clock

#

# CONFIG_RTC_CLASS is not set



#

# DMA Engine support

#

# CONFIG_DMA_ENGINE is not set



#

# DMA Clients

#



#

# DMA Devices

#



#

# File systems

#

CONFIG_EXT2_FS=y

# CONFIG_EXT2_FS_XATTR is not set

# CONFIG_EXT2_FS_XIP is not set

CONFIG_EXT3_FS=y

CONFIG_EXT3_FS_XATTR=y

# CONFIG_EXT3_FS_POSIX_ACL is not set

# CONFIG_EXT3_FS_SECURITY is not set

CONFIG_JBD=y

# CONFIG_JBD_DEBUG is not set

CONFIG_FS_MBCACHE=y

# CONFIG_REISERFS_FS is not set

# CONFIG_JFS_FS is not set

# CONFIG_FS_POSIX_ACL is not set

# CONFIG_XFS_FS is not set

# CONFIG_OCFS2_FS is not set

# CONFIG_MINIX_FS is not set

# CONFIG_ROMFS_FS is not set

CONFIG_INOTIFY=y

CONFIG_INOTIFY_USER=y

# CONFIG_QUOTA is not set

CONFIG_DNOTIFY=y

# CONFIG_AUTOFS_FS is not set

# CONFIG_AUTOFS4_FS is not set

# CONFIG_FUSE_FS is not set



#

# CD-ROM/DVD Filesystems

#

# CONFIG_ISO9660_FS is not set

# CONFIG_UDF_FS is not set



#

# DOS/FAT/NT Filesystems

#

# CONFIG_MSDOS_FS is not set

# CONFIG_VFAT_FS is not set

# CONFIG_NTFS_FS is not set



#

# Pseudo filesystems

#

CONFIG_PROC_FS=y

CONFIG_PROC_KCORE=y

CONFIG_SYSFS=y

CONFIG_TMPFS=y

# CONFIG_HUGETLB_PAGE is not set

CONFIG_RAMFS=y

# CONFIG_CONFIGFS_FS is not set



#

# Miscellaneous filesystems

#

# CONFIG_ADFS_FS is not set

# CONFIG_AFFS_FS is not set

# CONFIG_HFS_FS is not set

# CONFIG_HFSPLUS_FS is not set

# CONFIG_BEFS_FS is not set

# CONFIG_BFS_FS is not set

# CONFIG_EFS_FS is not set

# CONFIG_CRAMFS is not set

# CONFIG_VXFS_FS is not set

# CONFIG_HPFS_FS is not set

# CONFIG_QNX4FS_FS is not set

# CONFIG_SYSV_FS is not set

# CONFIG_UFS_FS is not set



#

# Network File Systems

#

CONFIG_NFS_FS=y

# CONFIG_NFS_V3 is not set

# CONFIG_NFS_V4 is not set

# CONFIG_NFS_DIRECTIO is not set

# CONFIG_NFSD is not set

CONFIG_ROOT_NFS=y

CONFIG_LOCKD=y

CONFIG_NFS_COMMON=y

CONFIG_SUNRPC=y

# CONFIG_RPCSEC_GSS_KRB5 is not set

# CONFIG_RPCSEC_GSS_SPKM3 is not set

# CONFIG_SMB_FS is not set

# CONFIG_CIFS is not set

# CONFIG_NCP_FS is not set

# CONFIG_CODA_FS is not set

# CONFIG_AFS_FS is not set

# CONFIG_9P_FS is not set



#

# Partition Types

#

CONFIG_PARTITION_ADVANCED=y

# CONFIG_ACORN_PARTITION is not set

# CONFIG_OSF_PARTITION is not set

# CONFIG_AMIGA_PARTITION is not set

# CONFIG_ATARI_PARTITION is not set

# CONFIG_MAC_PARTITION is not set

# CONFIG_MSDOS_PARTITION is not set

# CONFIG_LDM_PARTITION is not set

# CONFIG_SGI_PARTITION is not set

# CONFIG_ULTRIX_PARTITION is not set

# CONFIG_SUN_PARTITION is not set

# CONFIG_KARMA_PARTITION is not set

# CONFIG_EFI_PARTITION is not set



#

# Native Language Support

#

# CONFIG_NLS is not set



#

# Library routines

#

# CONFIG_CRC_CCITT is not set

# CONFIG_CRC16 is not set

CONFIG_CRC32=y

# CONFIG_LIBCRC32C is not set

CONFIG_PLIST=y



#

# Instrumentation Support

#

# CONFIG_PROFILING is not set



#

# Kernel hacking

#

# CONFIG_PRINTK_TIME is not set

# CONFIG_MAGIC_SYSRQ is not set

# CONFIG_UNUSED_SYMBOLS is not set

CONFIG_DEBUG_KERNEL=y

CONFIG_LOG_BUF_SHIFT=14

CONFIG_DETECT_SOFTLOCKUP=y

# CONFIG_SCHEDSTATS is not set

# CONFIG_DEBUG_SLAB is not set

# CONFIG_DEBUG_RT_MUTEXES is not set

# CONFIG_RT_MUTEX_TESTER is not set

# CONFIG_DEBUG_SPINLOCK is not set

CONFIG_DEBUG_MUTEXES=y

# CONFIG_DEBUG_RWSEMS is not set

# CONFIG_DEBUG_SPINLOCK_SLEEP is not set

# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set

# CONFIG_DEBUG_KOBJECT is not set

# CONFIG_DEBUG_INFO is not set

# CONFIG_DEBUG_FS is not set

# CONFIG_DEBUG_VM is not set

# CONFIG_UNWIND_INFO is not set

CONFIG_FORCED_INLINING=y

# CONFIG_RCU_TORTURE_TEST is not set

# CONFIG_DEBUGGER is not set

# CONFIG_KGDB_CONSOLE is not set

# CONFIG_BDI_SWITCH is not set

# CONFIG_BOOTX_TEXT is not set

# CONFIG_PPC_EARLY_DEBUG is not set



#

# Security options

#

# CONFIG_KEYS is not set

# CONFIG_SECURITY is not set



#

# Cryptographic options

#

# CONFIG_CRYPTO is not set



#

# Hardware crypto devices

#

arch/powerpc/platforms/85xx/Kconfig

+21 −0
Original line number Diff line number Diff line
@@ -11,6 +11,12 @@ config MPC8540_ADS 
	help

	  This option enables support for the MPC 8540 ADS board



config MPC8560_ADS

	bool "Freescale MPC8560 ADS"

	select DEFAULT_UIMAGE

	help

	  This option enables support for the MPC 8560 ADS board



config MPC85xx_CDS

	bool "Freescale MPC85xx CDS"

	select DEFAULT_UIMAGE
@@ -25,6 +31,11 @@ config MPC8540 
	select PPC_INDIRECT_PCI

	default y if MPC8540_ADS || MPC85xx_CDS



config MPC8560

	bool

	select PPC_INDIRECT_PCI

	default y if MPC8560_ADS



config PPC_INDIRECT_PCI_BE

	bool

	depends on PPC_85xx
@@ -34,4 +45,14 @@ config MPIC 
	bool

	default y



config CPM2

	bool

	depends on MPC8560

	default y

	help

	  The CPM2 (Communications Processor Module) is a coprocessor on

	  embedded CPUs made by Motorola.  Selecting this option means that

	  you wish to build a kernel for a machine with a CPM2 coprocessor

	  on it.



endmenu

arch/powerpc/platforms/85xx/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -3,4 +3,5 @@ 
#

obj-$(CONFIG_PPC_85xx)	+= misc.o pci.o

obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o

obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o

obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o

arch/powerpc/platforms/85xx/mpc85xx_ads.c

+109 −0

File changed.

Preview size limit exceeded, changes collapsed.

CRA Git | Maintained and supported by SUSTech CRA and CCSE