Unverified Commit 8fe62f12 authored by Ondrej Jirman's avatar Ondrej Jirman Committed by Maxime Ripard
Browse files

arm64: dts: allwinner: h6: Add Orange Pi 3 DTS 



Orange Pi 3 is a H6 based SBC made by Xulong, released in January 2019. It
has the following features:

- Allwinner H6 quad-core 64-bit ARM Cortex-A53
- GPU Mali-T720
- 1GB or 2GB LPDDR3 RAM
- AXP805 PMIC
- AP6256 Wifi/BT 5.0
- USB 2.0 host port (A)
- USB 2.0 micro usb, OTG
- USB 3.0 Host + 4 port USB hub (GL3510)
- Gigabit Ethernet (Realtek RTL8211E phy)
- HDMI 2.0 port
- soldered eMMC (optional)
- 3x LED (one is on the bottom)
- microphone
- audio jack
- PCIe

Add basic support for the board.

Signed-off-by: default avatarOndrej Jirman <megous@megous.com>
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@bootlin.com>
parent 089bee8d

arch/arm64/boot/dts/allwinner/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -21,6 +21,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb 
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb

dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb

dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-beelink-gs1.dtb

dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-3.dtb

dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb

dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb

dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb

arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts

0 → 100644
+215 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: (GPL-2.0+ or MIT)

/*

 * Copyright (C) 2019 Ondřej Jirman <megous@megous.com>

 */



/dts-v1/;



#include "sun50i-h6.dtsi"



#include <dt-bindings/gpio/gpio.h>



/ {

	model = "OrangePi 3";

	compatible = "xunlong,orangepi-3", "allwinner,sun50i-h6";



	aliases {

		serial0 = &uart0;

	};



	chosen {

		stdout-path = "serial0:115200n8";

	};



	leds {

		compatible = "gpio-leds";



		power {

			label = "orangepi:red:power";

			gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */

			default-state = "on";

		};



		status {

			label = "orangepi:green:status";

			gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */

		};

	};



	reg_vcc5v: vcc5v {

		/* board wide 5V supply directly from the DC jack */

		compatible = "regulator-fixed";

		regulator-name = "vcc-5v";

		regulator-min-microvolt = <5000000>;

		regulator-max-microvolt = <5000000>;

		regulator-always-on;

	};

};



&cpu0 {

	cpu-supply = <&reg_dcdca>;

};



&ehci0 {

	status = "okay";

};



&ehci3 {

	status = "okay";

};



&mmc0 {

	vmmc-supply = <&reg_cldo1>;

	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */

	bus-width = <4>;

	status = "okay";

};



&ohci0 {

	status = "okay";

};



&ohci3 {

	status = "okay";

};



&pio {

	vcc-pc-supply = <&reg_bldo2>;

	vcc-pd-supply = <&reg_cldo1>;

};



&r_i2c {

	status = "okay";



	axp805: pmic@36 {

		compatible = "x-powers,axp805", "x-powers,axp806";

		reg = <0x36>;

		interrupt-parent = <&r_intc>;

		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;

		interrupt-controller;

		#interrupt-cells = <1>;

		x-powers,self-working-mode;

		vina-supply = <&reg_vcc5v>;

		vinb-supply = <&reg_vcc5v>;

		vinc-supply = <&reg_vcc5v>;

		vind-supply = <&reg_vcc5v>;

		vine-supply = <&reg_vcc5v>;

		aldoin-supply = <&reg_vcc5v>;

		bldoin-supply = <&reg_vcc5v>;

		cldoin-supply = <&reg_vcc5v>;



		regulators {

			reg_aldo1: aldo1 {

				regulator-always-on;

				regulator-min-microvolt = <3300000>;

				regulator-max-microvolt = <3300000>;

				regulator-name = "vcc-pl-led-ir";

			};



			reg_aldo2: aldo2 {

				regulator-min-microvolt = <3300000>;

				regulator-max-microvolt = <3300000>;

				regulator-name = "vcc33-audio-tv-ephy-mac";

			};



			/* ALDO3 is shorted to CLDO1 */

			reg_aldo3: aldo3 {

				regulator-always-on;

				regulator-min-microvolt = <3300000>;

				regulator-max-microvolt = <3300000>;

				regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-1";

			};



			reg_bldo1: bldo1 {

				regulator-always-on;

				regulator-min-microvolt = <1800000>;

				regulator-max-microvolt = <1800000>;

				regulator-name = "vcc18-dram-bias-pll";

			};



			reg_bldo2: bldo2 {

				regulator-always-on;

				regulator-min-microvolt = <1800000>;

				regulator-max-microvolt = <1800000>;

				regulator-name = "vcc-efuse-pcie-hdmi-pc";

			};



			bldo3 {

				/* unused */

			};



			bldo4 {

				/* unused */

			};



			reg_cldo1: cldo1 {

				regulator-always-on;

				regulator-min-microvolt = <3300000>;

				regulator-max-microvolt = <3300000>;

				regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-2";

			};



			cldo2 {

				/* unused */

			};



			cldo3 {

				/* unused */

			};



			reg_dcdca: dcdca {

				regulator-always-on;

				regulator-min-microvolt = <800000>;

				regulator-max-microvolt = <1160000>;

				regulator-name = "vdd-cpu";

			};



			reg_dcdcc: dcdcc {

				regulator-min-microvolt = <810000>;

				regulator-max-microvolt = <1080000>;

				regulator-name = "vdd-gpu";

			};



			reg_dcdcd: dcdcd {

				regulator-always-on;

				regulator-min-microvolt = <960000>;

				regulator-max-microvolt = <960000>;

				regulator-name = "vdd-sys";

			};



			reg_dcdce: dcdce {

				regulator-always-on;

				regulator-min-microvolt = <1200000>;

				regulator-max-microvolt = <1200000>;

				regulator-name = "vcc-dram";

			};



			sw {

				/* unused */

			};

		};

	};

};



&uart0 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart0_ph_pins>;

	status = "okay";

};



&usb2otg {

	/*

	 * This board doesn't have a controllable VBUS even though it

	 * does have an ID pin. Using it as anything but a USB host is

	 * unsafe.

	 */

	dr_mode = "host";

	status = "okay";

};



&usb2phy {

	usb0_id_det-gpios = <&pio 2 15 GPIO_ACTIVE_HIGH>; /* PC15 */

	usb0_vbus-supply = <&reg_vcc5v>;

	usb3_vbus-supply = <&reg_vcc5v>;

	status = "okay";

};

CRA Git | Maintained and supported by SUSTech CRA and CCSE