Commit 8fdb1a09 authored by Lendacky, Thomas's avatar Lendacky, Thomas Committed by David S. Miller
Browse files

amd-xgbe-phy: Allow certain PHY settings to be set by UEFI 



Certain PHY settings need to be configurable by UEFI depending on the
platform being used.  Add new device tree / ACPI properties that, if
present, will override the pre-determined values currently used.

Signed-off-by: default avatarTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 82a19035

Documentation/devicetree/bindings/net/amd-xgbe-phy.txt

+16 −0
Original line number Diff line number Diff line
@@ -16,6 +16,18 @@ Optional properties: 
    0 - 1GbE and 10GbE (default)

    1 - 2.5GbE and 10GbE



The following optional properties are represented by an array with each

value corresponding to a particular speed. The first array value represents

the setting for the 1GbE speed, the second value for the 2.5GbE speed and

the third value for the 10GbE speed.  All three values are required if the

property is used.

- amd,serdes-blwc: Baseline wandering correction enablement

    0 - Off

    1 - On

- amd,serdes-cdr-rate: CDR rate speed selection

- amd,serdes-pq-skew: PQ (data sampling) skew

- amd,serdes-tx-amp: TX amplitude boost



Example:

	xgbe_phy@e1240800 {

		compatible = "amd,xgbe-phy-seattle-v1a", "ethernet-phy-ieee802.3-c45";
@@ -25,4 +37,8 @@ Example: 
		interrupt-parent = <&gic>;

		interrupts = <0 323 4>;

		amd,speed-set = <0>;

		amd,serdes-blwc = <1>, <1>, <0>;

		amd,serdes-cdr-rate = <2>, <2>, <7>;

		amd,serdes-pq-skew = <10>, <10>, <30>;

		amd,serdes-tx-amp = <15>, <15>, <10>;

	};

drivers/net/phy/amd-xgbe-phy.c

+136 −23
Original line number Diff line number Diff line
@@ -88,6 +88,15 @@ MODULE_DESCRIPTION("AMD 10GbE (amd-xgbe) PHY driver"); 
#define XGBE_PHY_MASK	0xfffffff0



#define XGBE_PHY_SPEEDSET_PROPERTY	"amd,speed-set"

#define XGBE_PHY_BLWC_PROPERTY		"amd,serdes-blwc"

#define XGBE_PHY_CDR_RATE_PROPERTY	"amd,serdes-cdr-rate"

#define XGBE_PHY_PQ_SKEW_PROPERTY	"amd,serdes-pq-skew"

#define XGBE_PHY_TX_AMP_PROPERTY	"amd,serdes-tx-amp"



#define XGBE_PHY_SPEEDS			3

#define XGBE_PHY_SPEED_1000		0

#define XGBE_PHY_SPEED_2500		1

#define XGBE_PHY_SPEED_10000		2



#define XGBE_AN_INT_CMPLT		0x01

#define XGBE_AN_INC_LINK		0x02
@@ -152,10 +161,10 @@ MODULE_DESCRIPTION("AMD 10GbE (amd-xgbe) PHY driver"); 
#define SIR0_STATUS_RX_READY_WIDTH	1

#define SIR0_STATUS_TX_READY_INDEX	8

#define SIR0_STATUS_TX_READY_WIDTH	1

#define SIR1_SPEED_CDR_RATE_INDEX	12

#define SIR1_SPEED_CDR_RATE_WIDTH	4

#define SIR1_SPEED_DATARATE_INDEX	4

#define SIR1_SPEED_DATARATE_WIDTH	2

#define SIR1_SPEED_PI_SPD_SEL_INDEX	12

#define SIR1_SPEED_PI_SPD_SEL_WIDTH	4

#define SIR1_SPEED_PLLSEL_INDEX		3

#define SIR1_SPEED_PLLSEL_WIDTH		1

#define SIR1_SPEED_RATECHANGE_INDEX	6
@@ -165,20 +174,26 @@ MODULE_DESCRIPTION("AMD 10GbE (amd-xgbe) PHY driver"); 
#define SIR1_SPEED_WORDMODE_INDEX	0

#define SIR1_SPEED_WORDMODE_WIDTH	3



#define SPEED_10000_BLWC		0

#define SPEED_10000_CDR			0x7

#define SPEED_10000_PLL			0x1

#define SPEED_10000_PQ			0x1e

#define SPEED_10000_RATE		0x0

#define SPEED_10000_TXAMP		0xa

#define SPEED_10000_WORD		0x7



#define SPEED_2500_BLWC			1

#define SPEED_2500_CDR			0x2

#define SPEED_2500_PLL			0x0

#define SPEED_2500_PQ			0xa

#define SPEED_2500_RATE			0x1

#define SPEED_2500_TXAMP		0xf

#define SPEED_2500_WORD			0x1



#define SPEED_1000_BLWC			1

#define SPEED_1000_CDR			0x2

#define SPEED_1000_PLL			0x0

#define SPEED_1000_PQ			0xa

#define SPEED_1000_RATE			0x3

#define SPEED_1000_TXAMP		0xf

#define SPEED_1000_WORD			0x1
@@ -193,15 +208,6 @@ MODULE_DESCRIPTION("AMD 10GbE (amd-xgbe) PHY driver"); 
#define RXTX_REG114_PQ_REG_INDEX	9

#define RXTX_REG114_PQ_REG_WIDTH	7



#define RXTX_10000_BLWC			0

#define RXTX_10000_PQ			0x1e



#define RXTX_2500_BLWC			1

#define RXTX_2500_PQ			0xa



#define RXTX_1000_BLWC			1

#define RXTX_1000_PQ			0xa



/* Bit setting and getting macros

 *  The get macro will extract the current bit field value from within

 *  the variable
@@ -303,6 +309,30 @@ do { \ 
	XRXTX_IOWRITE((_priv), _reg, reg_val);				\

} while (0)



static const u32 amd_xgbe_phy_serdes_blwc[] = {

	SPEED_1000_BLWC,

	SPEED_2500_BLWC,

	SPEED_10000_BLWC,

};



static const u32 amd_xgbe_phy_serdes_cdr_rate[] = {

	SPEED_1000_CDR,

	SPEED_2500_CDR,

	SPEED_10000_CDR,

};



static const u32 amd_xgbe_phy_serdes_pq_skew[] = {

	SPEED_1000_PQ,

	SPEED_2500_PQ,

	SPEED_10000_PQ,

};



static const u32 amd_xgbe_phy_serdes_tx_amp[] = {

	SPEED_1000_TXAMP,

	SPEED_2500_TXAMP,

	SPEED_10000_TXAMP,

};



enum amd_xgbe_phy_an {

	AMD_XGBE_AN_READY = 0,

	AMD_XGBE_AN_PAGE_RECEIVED,
@@ -353,6 +383,17 @@ struct amd_xgbe_phy_priv { 


	unsigned int speed_set;



	/* SerDes UEFI configurable settings.

	 *   Switching between modes/speeds requires new values for some

	 *   SerDes settings.  The values can be supplied as device

	 *   properties in array format.  The first array entry is for

	 *   1GbE, second for 2.5GbE and third for 10GbE

	 */

	u32 serdes_blwc[XGBE_PHY_SPEEDS];

	u32 serdes_cdr_rate[XGBE_PHY_SPEEDS];

	u32 serdes_pq_skew[XGBE_PHY_SPEEDS];

	u32 serdes_tx_amp[XGBE_PHY_SPEEDS];



	/* Auto-negotiation state machine support */

	struct mutex an_mutex;

	enum amd_xgbe_phy_an an_result;
@@ -483,12 +524,16 @@ static int amd_xgbe_phy_xgmii_mode(struct phy_device *phydev) 


	XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, DATARATE, SPEED_10000_RATE);

	XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, WORDMODE, SPEED_10000_WORD);

	XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, TXAMP, SPEED_10000_TXAMP);

	XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, PLLSEL, SPEED_10000_PLL);

	XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, PI_SPD_SEL, SPEED_10000_CDR);



	XRXTX_IOWRITE_BITS(priv, RXTX_REG20, BLWC_ENA, RXTX_10000_BLWC);

	XRXTX_IOWRITE_BITS(priv, RXTX_REG114, PQ_REG, RXTX_10000_PQ);

	XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, CDR_RATE,

			   priv->serdes_cdr_rate[XGBE_PHY_SPEED_10000]);

	XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, TXAMP,

			   priv->serdes_tx_amp[XGBE_PHY_SPEED_10000]);

	XRXTX_IOWRITE_BITS(priv, RXTX_REG20, BLWC_ENA,

			   priv->serdes_blwc[XGBE_PHY_SPEED_10000]);

	XRXTX_IOWRITE_BITS(priv, RXTX_REG114, PQ_REG,

			   priv->serdes_pq_skew[XGBE_PHY_SPEED_10000]);



	amd_xgbe_phy_serdes_complete_ratechange(phydev);
@@ -531,12 +576,16 @@ static int amd_xgbe_phy_gmii_2500_mode(struct phy_device *phydev) 


	XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, DATARATE, SPEED_2500_RATE);

	XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, WORDMODE, SPEED_2500_WORD);

	XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, TXAMP, SPEED_2500_TXAMP);

	XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, PLLSEL, SPEED_2500_PLL);

	XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, PI_SPD_SEL, SPEED_2500_CDR);



	XRXTX_IOWRITE_BITS(priv, RXTX_REG20, BLWC_ENA, RXTX_2500_BLWC);

	XRXTX_IOWRITE_BITS(priv, RXTX_REG114, PQ_REG, RXTX_2500_PQ);

	XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, CDR_RATE,

			   priv->serdes_cdr_rate[XGBE_PHY_SPEED_2500]);

	XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, TXAMP,

			   priv->serdes_tx_amp[XGBE_PHY_SPEED_2500]);

	XRXTX_IOWRITE_BITS(priv, RXTX_REG20, BLWC_ENA,

			   priv->serdes_blwc[XGBE_PHY_SPEED_2500]);

	XRXTX_IOWRITE_BITS(priv, RXTX_REG114, PQ_REG,

			   priv->serdes_pq_skew[XGBE_PHY_SPEED_2500]);



	amd_xgbe_phy_serdes_complete_ratechange(phydev);
@@ -579,12 +628,16 @@ static int amd_xgbe_phy_gmii_mode(struct phy_device *phydev) 


	XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, DATARATE, SPEED_1000_RATE);

	XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, WORDMODE, SPEED_1000_WORD);

	XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, TXAMP, SPEED_1000_TXAMP);

	XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, PLLSEL, SPEED_1000_PLL);

	XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, PI_SPD_SEL, SPEED_1000_CDR);



	XRXTX_IOWRITE_BITS(priv, RXTX_REG20, BLWC_ENA, RXTX_1000_BLWC);

	XRXTX_IOWRITE_BITS(priv, RXTX_REG114, PQ_REG, RXTX_1000_PQ);

	XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, CDR_RATE,

			   priv->serdes_cdr_rate[XGBE_PHY_SPEED_1000]);

	XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, TXAMP,

			   priv->serdes_tx_amp[XGBE_PHY_SPEED_1000]);

	XRXTX_IOWRITE_BITS(priv, RXTX_REG20, BLWC_ENA,

			   priv->serdes_blwc[XGBE_PHY_SPEED_1000]);

	XRXTX_IOWRITE_BITS(priv, RXTX_REG114, PQ_REG,

			   priv->serdes_pq_skew[XGBE_PHY_SPEED_1000]);



	amd_xgbe_phy_serdes_complete_ratechange(phydev);
@@ -1555,6 +1608,66 @@ static int amd_xgbe_phy_probe(struct phy_device *phydev) 
		goto err_sir1;

	}



	if (device_property_present(phy_dev, XGBE_PHY_BLWC_PROPERTY)) {

		ret = device_property_read_u32_array(phy_dev,

						     XGBE_PHY_BLWC_PROPERTY,

						     priv->serdes_blwc,

						     XGBE_PHY_SPEEDS);

		if (ret) {

			dev_err(dev, "invalid %s property\n",

				XGBE_PHY_BLWC_PROPERTY);

			goto err_sir1;

		}

	} else {

		memcpy(priv->serdes_blwc, amd_xgbe_phy_serdes_blwc,

		       sizeof(priv->serdes_blwc));

	}



	if (device_property_present(phy_dev, XGBE_PHY_CDR_RATE_PROPERTY)) {

		ret = device_property_read_u32_array(phy_dev,

						     XGBE_PHY_CDR_RATE_PROPERTY,

						     priv->serdes_cdr_rate,

						     XGBE_PHY_SPEEDS);

		if (ret) {

			dev_err(dev, "invalid %s property\n",

				XGBE_PHY_CDR_RATE_PROPERTY);

			goto err_sir1;

		}

	} else {

		memcpy(priv->serdes_cdr_rate, amd_xgbe_phy_serdes_cdr_rate,

		       sizeof(priv->serdes_cdr_rate));

	}



	if (device_property_present(phy_dev, XGBE_PHY_PQ_SKEW_PROPERTY)) {

		ret = device_property_read_u32_array(phy_dev,

						     XGBE_PHY_PQ_SKEW_PROPERTY,

						     priv->serdes_pq_skew,

						     XGBE_PHY_SPEEDS);

		if (ret) {

			dev_err(dev, "invalid %s property\n",

				XGBE_PHY_PQ_SKEW_PROPERTY);

			goto err_sir1;

		}

	} else {

		memcpy(priv->serdes_pq_skew, amd_xgbe_phy_serdes_pq_skew,

		       sizeof(priv->serdes_pq_skew));

	}



	if (device_property_present(phy_dev, XGBE_PHY_TX_AMP_PROPERTY)) {

		ret = device_property_read_u32_array(phy_dev,

						     XGBE_PHY_TX_AMP_PROPERTY,

						     priv->serdes_tx_amp,

						     XGBE_PHY_SPEEDS);

		if (ret) {

			dev_err(dev, "invalid %s property\n",

				XGBE_PHY_TX_AMP_PROPERTY);

			goto err_sir1;

		}

	} else {

		memcpy(priv->serdes_tx_amp, amd_xgbe_phy_serdes_tx_amp,

		       sizeof(priv->serdes_tx_amp));

	}



	phydev->priv = priv;



	if (!priv->adev || acpi_disabled)

CRA Git | Maintained and supported by SUSTech CRA and CCSE