Commit 8f574b35 authored by Jie Yang's avatar Jie Yang Committed by David S. Miller
Browse files

atl1c: Add AR8151 v2 support and change L0s/L1 routine 



Add AR8151 v2.0 Gigabit 1000 support
Change jumbo frame size to 6K
Update L0s/L1 rountine
        when link speed is 100M or 1G, set L1 link timer to 4 for l1d_2 and l2c_b2
        set L1 link timer to 7 for l2c_b, set L1 link timer to 0xF for others.
Update atl1c_suspend routine
	just refactory the function, add atl1c_phy_power_saving routine,
	when Wake On Lan enable, this func will be called to save power,
	it will reautoneg PHY to 10/100M speed depend on the link
	partners link capability.
Update atl1c_configure_des_ring
        do not use l2c_b default SRAM configuration.

Signed-off-by: default avatarJie Yang <Jie.Yang@atheros.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent aac4dddc

drivers/net/atl1c/atl1c.h

+7 −2
Original line number Diff line number Diff line
@@ -73,7 +73,8 @@ 
#define FULL_DUPLEX        2



#define AT_RX_BUF_SIZE		(ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN)

#define MAX_JUMBO_FRAME_SIZE 	(9*1024)

#define MAX_JUMBO_FRAME_SIZE	(6*1024)

#define MAX_TSO_FRAME_SIZE      (7*1024)

#define MAX_TX_OFFLOAD_THRESH	(9*1024)



#define AT_MAX_RECEIVE_QUEUE    4
@@ -87,10 +88,11 @@ 
#define AT_MAX_INT_WORK		5

#define AT_TWSI_EEPROM_TIMEOUT 	100

#define AT_HW_MAX_IDLE_DELAY 	10

#define AT_SUSPEND_LINK_TIMEOUT 28

#define AT_SUSPEND_LINK_TIMEOUT 100



#define AT_ASPM_L0S_TIMER	6

#define AT_ASPM_L1_TIMER	12

#define AT_LCKDET_TIMER		12



#define ATL1C_PCIE_L0S_L1_DISABLE 	0x01

#define ATL1C_PCIE_PHY_RESET		0x02
@@ -316,6 +318,7 @@ enum atl1c_nic_type { 
	athr_l2c_b,

	athr_l2c_b2,

	athr_l1d,

	athr_l1d_2,

};



enum atl1c_trans_queue {
@@ -392,6 +395,8 @@ struct atl1c_hw { 
	u16 subsystem_id;

	u16 subsystem_vendor_id;

	u8 revision_id;

	u16 phy_id1;

	u16 phy_id2;



	u32 intr_mask;

	u8 dmaw_dly_cnt;

drivers/net/atl1c/atl1c_hw.c

+92 −15
Original line number Diff line number Diff line
@@ -37,6 +37,9 @@ int atl1c_check_eeprom_exist(struct atl1c_hw *hw) 
	if (data & TWSI_DEBUG_DEV_EXIST)

		return 1;



	AT_READ_REG(hw, REG_MASTER_CTRL, &data);

	if (data & MASTER_CTRL_OTP_SEL)

		return 1;

	return 0;

}
@@ -69,6 +72,8 @@ static int atl1c_get_permanent_address(struct atl1c_hw *hw) 
	u32 i;

	u32 otp_ctrl_data;

	u32 twsi_ctrl_data;

	u32 ltssm_ctrl_data;

	u32 wol_data;

	u8  eth_addr[ETH_ALEN];

	u16 phy_data;

	bool raise_vol = false;
@@ -104,6 +109,15 @@ static int atl1c_get_permanent_address(struct atl1c_hw *hw) 
			udelay(20);

			raise_vol = true;

		}

		/* close open bit of ReadOnly*/

		AT_READ_REG(hw, REG_LTSSM_ID_CTRL, &ltssm_ctrl_data);

		ltssm_ctrl_data &= ~LTSSM_ID_EN_WRO;

		AT_WRITE_REG(hw, REG_LTSSM_ID_CTRL, ltssm_ctrl_data);



		/* clear any WOL settings */

		AT_WRITE_REG(hw, REG_WOL_CTRL, 0);

		AT_READ_REG(hw, REG_WOL_CTRL, &wol_data);





		AT_READ_REG(hw, REG_TWSI_CTRL, &twsi_ctrl_data);

		twsi_ctrl_data |= TWSI_CTRL_SW_LDSTART;
@@ -119,17 +133,15 @@ static int atl1c_get_permanent_address(struct atl1c_hw *hw) 
	}

	/* Disable OTP_CLK */

	if ((hw->nic_type == athr_l1c || hw->nic_type == athr_l2c)) {

		if (otp_ctrl_data & OTP_CTRL_CLK_EN) {

		otp_ctrl_data &= ~OTP_CTRL_CLK_EN;

		AT_WRITE_REG(hw, REG_OTP_CTRL, otp_ctrl_data);

			AT_WRITE_FLUSH(hw);

		msleep(1);

	}

	}

	if (raise_vol) {

		if (hw->nic_type == athr_l2c_b ||

		    hw->nic_type == athr_l2c_b2 ||

		    hw->nic_type == athr_l1d) {

		    hw->nic_type == athr_l1d ||

		    hw->nic_type == athr_l1d_2) {

			atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0x00);

			if (atl1c_read_phy_reg(hw, MII_DBG_DATA, &phy_data))

				goto out;
@@ -456,14 +468,22 @@ int atl1c_phy_reset(struct atl1c_hw *hw) 


	if (hw->nic_type == athr_l2c_b ||

	    hw->nic_type == athr_l2c_b2 ||

	    hw->nic_type == athr_l1d) {

	    hw->nic_type == athr_l1d ||

	    hw->nic_type == athr_l1d_2) {

		atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0x3B);

		atl1c_read_phy_reg(hw, MII_DBG_DATA, &phy_data);

		atl1c_write_phy_reg(hw, MII_DBG_DATA, phy_data & 0xFFF7);

		msleep(20);

	}



	/*Enable PHY LinkChange Interrupt */

	if (hw->nic_type == athr_l1d) {

		atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0x29);

		atl1c_write_phy_reg(hw, MII_DBG_DATA, 0x929D);

	}

	if (hw->nic_type == athr_l1c || hw->nic_type == athr_l2c_b2

		|| hw->nic_type == athr_l2c || hw->nic_type == athr_l2c) {

		atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0x29);

		atl1c_write_phy_reg(hw, MII_DBG_DATA, 0xB6DD);

	}

	err = atl1c_write_phy_reg(hw, MII_IER, mii_ier_data);

	if (err) {

		if (netif_msg_hw(adapter))
@@ -482,11 +502,9 @@ int atl1c_phy_init(struct atl1c_hw *hw) 
	struct pci_dev *pdev = adapter->pdev;

	int ret_val;

	u16 mii_bmcr_data = BMCR_RESET;

	u16 phy_id1, phy_id2;



	if ((atl1c_read_phy_reg(hw, MII_PHYSID1, &phy_id1) != 0) ||

		(atl1c_read_phy_reg(hw, MII_PHYSID2, &phy_id2) != 0)) {

			if (netif_msg_link(adapter))

	if ((atl1c_read_phy_reg(hw, MII_PHYSID1, &hw->phy_id1) != 0) ||

		(atl1c_read_phy_reg(hw, MII_PHYSID2, &hw->phy_id2) != 0)) {

		dev_err(&pdev->dev, "Error get phy ID\n");

		return -1;

	}
@@ -572,6 +590,65 @@ int atl1c_get_speed_and_duplex(struct atl1c_hw *hw, u16 *speed, u16 *duplex) 
	return 0;

}



int atl1c_phy_power_saving(struct atl1c_hw *hw)

{

	struct atl1c_adapter *adapter = (struct atl1c_adapter *)hw->adapter;

	struct pci_dev *pdev = adapter->pdev;

	int ret = 0;

	u16 autoneg_advertised = ADVERTISED_10baseT_Half;

	u16 save_autoneg_advertised;

	u16 phy_data;

	u16 mii_lpa_data;

	u16 speed = SPEED_0;

	u16 duplex = FULL_DUPLEX;

	int i;



	atl1c_read_phy_reg(hw, MII_BMSR, &phy_data);

	atl1c_read_phy_reg(hw, MII_BMSR, &phy_data);

	if (phy_data & BMSR_LSTATUS) {

		atl1c_read_phy_reg(hw, MII_LPA, &mii_lpa_data);

		if (mii_lpa_data & LPA_10FULL)

			autoneg_advertised = ADVERTISED_10baseT_Full;

		else if (mii_lpa_data & LPA_10HALF)

			autoneg_advertised = ADVERTISED_10baseT_Half;

		else if (mii_lpa_data & LPA_100HALF)

			autoneg_advertised = ADVERTISED_100baseT_Half;

		else if (mii_lpa_data & LPA_100FULL)

			autoneg_advertised = ADVERTISED_100baseT_Full;



		save_autoneg_advertised = hw->autoneg_advertised;

		hw->phy_configured = false;

		hw->autoneg_advertised = autoneg_advertised;

		if (atl1c_restart_autoneg(hw) != 0) {

			dev_dbg(&pdev->dev, "phy autoneg failed\n");

			ret = -1;

		}

		hw->autoneg_advertised = save_autoneg_advertised;



		if (mii_lpa_data) {

			for (i = 0; i < AT_SUSPEND_LINK_TIMEOUT; i++) {

				mdelay(100);

				atl1c_read_phy_reg(hw, MII_BMSR, &phy_data);

				atl1c_read_phy_reg(hw, MII_BMSR, &phy_data);

				if (phy_data & BMSR_LSTATUS) {

					if (atl1c_get_speed_and_duplex(hw, &speed,

									&duplex) != 0)

						dev_dbg(&pdev->dev,

							"get speed and duplex failed\n");

					break;

				}

			}

		}

	} else {

		speed = SPEED_10;

		duplex = HALF_DUPLEX;

	}

	adapter->link_speed = speed;

	adapter->link_duplex = duplex;



	return ret;

}



int atl1c_restart_autoneg(struct atl1c_hw *hw)

{

	int err = 0;

drivers/net/atl1c/atl1c_hw.h

+46 −3
Original line number Diff line number Diff line
@@ -42,7 +42,7 @@ bool atl1c_read_eeprom(struct atl1c_hw *hw, u32 offset, u32 *p_value); 
int atl1c_phy_init(struct atl1c_hw *hw);

int atl1c_check_eeprom_exist(struct atl1c_hw *hw);

int atl1c_restart_autoneg(struct atl1c_hw *hw);



int atl1c_phy_power_saving(struct atl1c_hw *hw);

/* register definition */

#define REG_DEVICE_CAP              	0x5C

#define DEVICE_CAP_MAX_PAYLOAD_MASK     0x7
@@ -120,6 +120,12 @@ int atl1c_restart_autoneg(struct atl1c_hw *hw); 
#define REG_PCIE_PHYMISC	    	0x1000

#define PCIE_PHYMISC_FORCE_RCV_DET	0x4



#define REG_PCIE_PHYMISC2		0x1004

#define PCIE_PHYMISC2_SERDES_CDR_MASK	0x3

#define PCIE_PHYMISC2_SERDES_CDR_SHIFT	16

#define PCIE_PHYMISC2_SERDES_TH_MASK	0x3

#define PCIE_PHYMISC2_SERDES_TH_SHIFT	18



#define REG_TWSI_DEBUG			0x1108

#define TWSI_DEBUG_DEV_EXIST		0x20000000
@@ -150,24 +156,28 @@ int atl1c_restart_autoneg(struct atl1c_hw *hw); 
#define PM_CTRL_ASPM_L0S_EN		0x00001000

#define PM_CTRL_CLK_SWH_L1		0x00002000

#define PM_CTRL_CLK_PWM_VER1_1		0x00004000

#define PM_CTRL_PCIE_RECV		0x00008000

#define PM_CTRL_RCVR_WT_TIMER		0x00008000

#define PM_CTRL_L1_ENTRY_TIMER_MASK	0xF

#define PM_CTRL_L1_ENTRY_TIMER_SHIFT	16

#define PM_CTRL_PM_REQ_TIMER_MASK	0xF

#define PM_CTRL_PM_REQ_TIMER_SHIFT	20

#define PM_CTRL_LCKDET_TIMER_MASK	0x3F

#define PM_CTRL_LCKDET_TIMER_MASK	0xF

#define PM_CTRL_LCKDET_TIMER_SHIFT	24

#define PM_CTRL_EN_BUFS_RX_L0S		0x10000000

#define PM_CTRL_SA_DLY_EN		0x20000000

#define PM_CTRL_MAC_ASPM_CHK		0x40000000

#define PM_CTRL_HOTRST			0x80000000



#define REG_LTSSM_ID_CTRL		0x12FC

#define LTSSM_ID_EN_WRO			0x1000

/* Selene Master Control Register */

#define REG_MASTER_CTRL			0x1400

#define MASTER_CTRL_SOFT_RST            0x1

#define MASTER_CTRL_TEST_MODE_MASK	0x3

#define MASTER_CTRL_TEST_MODE_SHIFT	2

#define MASTER_CTRL_BERT_START		0x10

#define MASTER_CTRL_OOB_DIS_OFF		0x40

#define MASTER_CTRL_SA_TIMER_EN		0x80

#define MASTER_CTRL_MTIMER_EN           0x100

#define MASTER_CTRL_MANUAL_INT          0x200

#define MASTER_CTRL_TX_ITIMER_EN	0x400
@@ -220,6 +230,12 @@ int atl1c_restart_autoneg(struct atl1c_hw *hw); 
		GPHY_CTRL_PWDOWN_HW	|\

		GPHY_CTRL_PHY_IDDQ)



#define GPHY_CTRL_POWER_SAVING (	\

		GPHY_CTRL_SEL_ANA_RST	|\

		GPHY_CTRL_HIB_EN	|\

		GPHY_CTRL_HIB_PULSE	|\

		GPHY_CTRL_PWDOWN_HW	|\

		GPHY_CTRL_PHY_IDDQ)

/* Block IDLE Status Register */

#define REG_IDLE_STATUS  		0x1410

#define IDLE_STATUS_MASK		0x00FF
@@ -287,6 +303,14 @@ int atl1c_restart_autoneg(struct atl1c_hw *hw); 
#define SERDES_LOCK_DETECT          	0x1  /* SerDes lock detected. This signal

					      * comes from Analog SerDes */

#define SERDES_LOCK_DETECT_EN       	0x2  /* 1: Enable SerDes Lock detect function */

#define SERDES_LOCK_STS_SELFB_PLL_SHIFT 0xE

#define SERDES_LOCK_STS_SELFB_PLL_MASK  0x3

#define SERDES_OVCLK_18_25		0x0

#define SERDES_OVCLK_12_18		0x1

#define SERDES_OVCLK_0_4		0x2

#define SERDES_OVCLK_4_12		0x3

#define SERDES_MAC_CLK_SLOWDOWN		0x20000

#define SERDES_PYH_CLK_SLOWDOWN		0x40000



/* MAC Control Register  */

#define REG_MAC_CTRL         		0x1480
@@ -693,6 +717,21 @@ int atl1c_restart_autoneg(struct atl1c_hw *hw); 
#define REG_MAC_TX_STATUS_BIN 		0x1760

#define REG_MAC_TX_STATUS_END 		0x17c0



#define REG_CLK_GATING_CTRL		0x1814

#define CLK_GATING_DMAW_EN		0x0001

#define CLK_GATING_DMAR_EN		0x0002

#define CLK_GATING_TXQ_EN		0x0004

#define CLK_GATING_RXQ_EN		0x0008

#define CLK_GATING_TXMAC_EN		0x0010

#define CLK_GATING_RXMAC_EN		0x0020



#define CLK_GATING_EN_ALL	(CLK_GATING_DMAW_EN |\

				 CLK_GATING_DMAR_EN |\

				 CLK_GATING_TXQ_EN  |\

				 CLK_GATING_RXQ_EN  |\

				 CLK_GATING_TXMAC_EN|\

				 CLK_GATING_RXMAC_EN)



/* DEBUG ADDR */

#define REG_DEBUG_DATA0 		0x1900

#define REG_DEBUG_DATA1 		0x1904
@@ -734,6 +773,10 @@ int atl1c_restart_autoneg(struct atl1c_hw *hw); 


#define MII_PHYSID1			0x02

#define MII_PHYSID2			0x03

#define L1D_MPW_PHYID1			0xD01C  /* V7 */

#define L1D_MPW_PHYID2			0xD01D  /* V1-V6 */

#define L1D_MPW_PHYID3			0xD01E  /* V8 */





/* Autoneg Advertisement Register */

#define MII_ADVERTISE			0x04

drivers/net/atl1c/atl1c_main.c

+200 −148

File changed.

Preview size limit exceeded, changes collapsed.

CRA Git | Maintained and supported by SUSTech CRA and CCSE