Commit 8f43e18e authored by Mike Dunn's avatar Mike Dunn Committed by Thierry Reding
Browse files

pwm-backlight: Allow for non-increasing brightness levels 



Currently the driver assumes that the values specified in the
brightness-levels device tree property increase as they are parsed from
left to right.  But boards that invert the signal between the PWM output
and the backlight will need to specify decreasing brightness-levels.
This patch removes the assumption that the last element of the array is
the maximum value, and instead searches the array for the maximum value
and uses that in the duty cycle calculation.

Signed-off-by: default avatarMike Dunn <mikedunn@newsguy.com>
Signed-off-by: default avatarThierry Reding <treding@nvidia.com>
parent 22ceeee1

drivers/video/backlight/pwm_bl.c

+15 −14
Original line number Diff line number Diff line
@@ -34,6 +34,7 @@ struct pwm_bl_data { 
	struct regulator	*power_supply;

	int			enable_gpio;

	unsigned long		enable_gpio_flags;

	unsigned int		scale;

	int			(*notify)(struct device *,

					  int brightness);

	void			(*notify_after)(struct device *,
@@ -42,23 +43,20 @@ struct pwm_bl_data { 
	void			(*exit)(struct device *);

};



static void pwm_backlight_power_on(struct pwm_bl_data *pb, int brightness,

				   int max)

static void pwm_backlight_power_on(struct pwm_bl_data *pb, int brightness)

{

	unsigned int lth = pb->lth_brightness;

	int duty_cycle, err;



	if (pb->enabled)

		return;



	if (pb->levels) {

	if (pb->levels)

		duty_cycle = pb->levels[brightness];

		max = pb->levels[max];

	} else {

	else

		duty_cycle = brightness;

	}



	duty_cycle = (duty_cycle * (pb->period - pb->lth_brightness) / max) +

		     pb->lth_brightness;

	duty_cycle = (duty_cycle * (pb->period - lth) / pb->scale) + lth;



	pwm_config(pb->pwm, duty_cycle, pb->period);
@@ -100,7 +98,6 @@ static int pwm_backlight_update_status(struct backlight_device *bl) 
{

	struct pwm_bl_data *pb = bl_get_data(bl);

	int brightness = bl->props.brightness;

	int max = bl->props.max_brightness;



	if (bl->props.power != FB_BLANK_UNBLANK ||

	    bl->props.fb_blank != FB_BLANK_UNBLANK ||
@@ -111,7 +108,7 @@ static int pwm_backlight_update_status(struct backlight_device *bl) 
		brightness = pb->notify(pb->dev, brightness);



	if (brightness > 0)

		pwm_backlight_power_on(pb, brightness, max);

		pwm_backlight_power_on(pb, brightness);

	else

		pwm_backlight_power_off(pb);
@@ -218,7 +215,6 @@ static int pwm_backlight_probe(struct platform_device *pdev) 
	struct backlight_properties props;

	struct backlight_device *bl;

	struct pwm_bl_data *pb;

	unsigned int max;

	int ret;



	if (!data) {
@@ -245,10 +241,15 @@ static int pwm_backlight_probe(struct platform_device *pdev) 
	}



	if (data->levels) {

		max = data->levels[data->max_brightness];

		unsigned int i;



		for (i = 0; i <= data->max_brightness; i++)

			if (data->levels[i] > pb->scale)

				pb->scale = data->levels[i];



		pb->levels = data->levels;

	} else

		max = data->max_brightness;

		pb->scale = data->max_brightness;



	pb->enable_gpio = data->enable_gpio;

	pb->enable_gpio_flags = data->enable_gpio_flags;
@@ -304,7 +305,7 @@ static int pwm_backlight_probe(struct platform_device *pdev) 
		pwm_set_period(pb->pwm, data->pwm_period_ns);



	pb->period = pwm_get_period(pb->pwm);

	pb->lth_brightness = data->lth_brightness * (pb->period / max);

	pb->lth_brightness = data->lth_brightness * (pb->period / pb->scale);



	memset(&props, 0, sizeof(struct backlight_properties));

	props.type = BACKLIGHT_RAW;

CRA Git | Maintained and supported by SUSTech CRA and CCSE