Commit 8ebd4cf1 authored by Easwar Hariharan's avatar Easwar Hariharan Committed by Doug Ledford
Browse files

staging/rdma/hfi1: Add active and optical cable support 



This patch qualifies and tunes active and optical cables for optimal
bit error rate and signal integrity settings. These settings are
fetched from the platform configuration data.

Based on attributes of the QSFP cable as read from the SFF-8636
compliant memory map, we select the appropriate settings from the
platform configuration data (examples: TX/RX equalization, enabling
cable high power, enabling TX/RX clock data recovery mechanisms, and RX
amplitude control) and apply them to the SERDES and QSFP cable.

The platform configuration data also contains system parameters such
as maximum power dissipation supported, and the cables are qualified
based on these parameters. As part of qualifying the cables, the
correct OfflineDisabledReasons are set for the appropriate scenarios.

Reviewed-by: default avatarDean Luick <dean.luick@intel.com>
Reviewed-by: default avatarMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: default avatarBrent R Rothermel <brent.r.rothermel@intel.com>
Signed-off-by: default avatarEaswar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: default avatarJubin John <jubin.john@intel.com>
Signed-off-by: default avatarDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
parent c7cb7635

drivers/staging/rdma/hfi1/Makefile

+1 −1
Original line number Diff line number Diff line
@@ -8,7 +8,7 @@ 
obj-$(CONFIG_INFINIBAND_HFI1) += hfi1.o



hfi1-y := chip.o device.o diag.o driver.o efivar.o eprom.o file_ops.o firmware.o \

	init.o intr.o mad.o pcie.o pio.o pio_copy.o \

	init.o intr.o mad.o pcie.o pio.o pio_copy.o platform.o \

	qp.o qsfp.o rc.o ruc.o sdma.o sysfs.o trace.o twsi.o \

	uc.o ud.o user_exp_rcv.o user_pages.o user_sdma.o verbs.o

hfi1-$(CONFIG_DEBUG_FS) += debugfs.o

drivers/staging/rdma/hfi1/chip.c

+150 −146
Original line number Diff line number Diff line
@@ -64,6 +64,7 @@ 
#include "sdma.h"

#include "eprom.h"

#include "efivar.h"

#include "platform.h"



#define NUM_IB_PORTS 1
@@ -5826,7 +5827,7 @@ static void is_various_int(struct hfi1_devdata *dd, unsigned int source) 


static void handle_qsfp_int(struct hfi1_devdata *dd, u32 src_ctx, u64 reg)

{

	/* source is always zero */

	/* src_ctx is always zero */

	struct hfi1_pportdata *ppd = dd->pport;

	unsigned long flags;

	u64 qsfp_int_mgmt = (u64)(QSFP_HFI0_INT_N | QSFP_HFI0_MODPRST_N);
@@ -5849,14 +5850,13 @@ static void handle_qsfp_int(struct hfi1_devdata *dd, u32 src_ctx, u64 reg) 
			 * an interrupt when a cable is inserted

			 */

			ppd->qsfp_info.cache_valid = 0;

			ppd->qsfp_info.qsfp_interrupt_functional = 0;

			ppd->qsfp_info.reset_needed = 0;

			ppd->qsfp_info.limiting_active = 0;

			spin_unlock_irqrestore(&ppd->qsfp_info.qsfp_lock,

						flags);

			write_csr(dd,

					dd->hfi1_id ?

						ASIC_QSFP2_INVERT :

						ASIC_QSFP1_INVERT,

				qsfp_int_mgmt);

			/* Invert the ModPresent pin now to detect plug-in */

			write_csr(dd, dd->hfi1_id ? ASIC_QSFP2_INVERT :

				  ASIC_QSFP1_INVERT, qsfp_int_mgmt);



			if ((ppd->offline_disabled_reason >

			  HFI1_ODR_MASK(
@@ -5883,12 +5883,16 @@ static void handle_qsfp_int(struct hfi1_devdata *dd, u32 src_ctx, u64 reg) 
			spin_unlock_irqrestore(&ppd->qsfp_info.qsfp_lock,

						flags);



			/*

			 * Stop inversion of ModPresent pin to detect

			 * removal of the cable

			 */

			qsfp_int_mgmt &= ~(u64)QSFP_HFI0_MODPRST_N;

			write_csr(dd,

					dd->hfi1_id ?

						ASIC_QSFP2_INVERT :

						ASIC_QSFP1_INVERT,

				qsfp_int_mgmt);

			write_csr(dd, dd->hfi1_id ? ASIC_QSFP2_INVERT :

				  ASIC_QSFP1_INVERT, qsfp_int_mgmt);



			ppd->offline_disabled_reason =

				HFI1_ODR_MASK(OPA_LINKDOWN_REASON_TRANSIENT);

		}

	}
@@ -5898,7 +5902,6 @@ static void handle_qsfp_int(struct hfi1_devdata *dd, u32 src_ctx, u64 reg) 
				__func__);

		spin_lock_irqsave(&ppd->qsfp_info.qsfp_lock, flags);

		ppd->qsfp_info.check_interrupt_flags = 1;

		ppd->qsfp_info.qsfp_interrupt_functional = 1;

		spin_unlock_irqrestore(&ppd->qsfp_info.qsfp_lock, flags);

	}
@@ -6666,6 +6669,7 @@ void handle_link_up(struct work_struct *work) 
		set_link_down_reason(ppd, OPA_LINKDOWN_REASON_SPEED_POLICY, 0,

			OPA_LINKDOWN_REASON_SPEED_POLICY);

		set_link_state(ppd, HLS_DN_OFFLINE);

		tune_serdes(ppd);

		start_link(ppd);

	}

}
@@ -6691,7 +6695,13 @@ void handle_link_down(struct work_struct *work) 
	struct hfi1_pportdata *ppd = container_of(work, struct hfi1_pportdata,

								link_down_work);



	/* go offline first, then deal with reasons */

	if ((ppd->host_link_state &

	     (HLS_DN_POLL | HLS_VERIFY_CAP | HLS_GOING_UP)) &&

	     ppd->port_type == PORT_TYPE_FIXED)

		ppd->offline_disabled_reason =

			HFI1_ODR_MASK(OPA_LINKDOWN_REASON_NOT_INSTALLED);



	/* Go offline first, then deal with reading/writing through 8051 */

	set_link_state(ppd, HLS_DN_OFFLINE);



	lcl_reason = 0;
@@ -6713,11 +6723,13 @@ void handle_link_down(struct work_struct *work) 


	/* If there is no cable attached, turn the DC off. Otherwise,

	 * start the link bring up. */

	if (!qsfp_mod_present(ppd))

	if (!qsfp_mod_present(ppd)) {

		dc_shutdown(ppd->dd);

	else

	} else {

		tune_serdes(ppd);

		start_link(ppd);

	}

}



void handle_link_bounce(struct work_struct *work)

{
@@ -6729,6 +6741,7 @@ void handle_link_bounce(struct work_struct *work) 
	 */

	if (ppd->host_link_state & HLS_UP) {

		set_link_state(ppd, HLS_DN_OFFLINE);

		tune_serdes(ppd);

		start_link(ppd);

	} else {

		dd_dev_info(ppd->dd, "%s: link not up (%s), nothing to do\n",
@@ -7237,6 +7250,7 @@ done: 
		set_link_down_reason(ppd, OPA_LINKDOWN_REASON_WIDTH_POLICY, 0,

		  OPA_LINKDOWN_REASON_WIDTH_POLICY);

		set_link_state(ppd, HLS_DN_OFFLINE);

		tune_serdes(ppd);

		start_link(ppd);

	}

}
@@ -8235,7 +8249,7 @@ static int set_physical_link_state(struct hfi1_devdata *dd, u64 state) 
	return do_8051_command(dd, HCMD_CHANGE_PHY_STATE, state, NULL);

}



static int load_8051_config(struct hfi1_devdata *dd, u8 field_id,

int load_8051_config(struct hfi1_devdata *dd, u8 field_id,

		     u8 lane_id, u32 config_data)

{

	u64 data;
@@ -8258,7 +8272,7 @@ static int load_8051_config(struct hfi1_devdata *dd, u8 field_id, 
 * set the result, even on error.

 * Return 0 on success, -errno on failure

 */

static int read_8051_config(struct hfi1_devdata *dd, u8 field_id, u8 lane_id,

int read_8051_config(struct hfi1_devdata *dd, u8 field_id, u8 lane_id,

		     u32 *result)

{

	u64 big_data;
@@ -8881,32 +8895,80 @@ int start_link(struct hfi1_pportdata *ppd) 
	return -EAGAIN;

}



static void reset_qsfp(struct hfi1_pportdata *ppd)

static void wait_for_qsfp_init(struct hfi1_pportdata *ppd)

{

	struct hfi1_devdata *dd = ppd->dd;

	u64 mask;

	unsigned long timeout;



	/*

	 * Check for QSFP interrupt for t_init (SFF 8679)

	 */

	timeout = jiffies + msecs_to_jiffies(2000);

	while (1) {

		mask = read_csr(dd, dd->hfi1_id ?

				ASIC_QSFP2_IN : ASIC_QSFP1_IN);

		if (!(mask & QSFP_HFI0_INT_N)) {

			write_csr(dd, dd->hfi1_id ? ASIC_QSFP2_CLEAR :

				  ASIC_QSFP1_CLEAR, QSFP_HFI0_INT_N);

			break;

		}

		if (time_after(jiffies, timeout)) {

			dd_dev_info(dd, "%s: No IntN detected, reset complete\n",

				    __func__);

			break;

		}

		udelay(2);

	}

}



static void set_qsfp_int_n(struct hfi1_pportdata *ppd, u8 enable)

{

	struct hfi1_devdata *dd = ppd->dd;

	u64 mask;



	mask = read_csr(dd, dd->hfi1_id ? ASIC_QSFP2_MASK : ASIC_QSFP1_MASK);

	if (enable)

		mask |= (u64)QSFP_HFI0_INT_N;

	else

		mask &= ~(u64)QSFP_HFI0_INT_N;

	write_csr(dd, dd->hfi1_id ? ASIC_QSFP2_MASK : ASIC_QSFP1_MASK, mask);

}



void reset_qsfp(struct hfi1_pportdata *ppd)

{

	struct hfi1_devdata *dd = ppd->dd;

	u64 mask, qsfp_mask;



	/* Disable INT_N from triggering QSFP interrupts */

	set_qsfp_int_n(ppd, 0);



	/* Reset the QSFP */

	mask = (u64)QSFP_HFI0_RESET_N;

	qsfp_mask = read_csr(dd,

		dd->hfi1_id ? ASIC_QSFP2_OE : ASIC_QSFP1_OE);

	qsfp_mask = read_csr(dd, dd->hfi1_id ? ASIC_QSFP2_OE : ASIC_QSFP1_OE);

	qsfp_mask |= mask;

	write_csr(dd,

		dd->hfi1_id ? ASIC_QSFP2_OE : ASIC_QSFP1_OE,

		qsfp_mask);

		dd->hfi1_id ? ASIC_QSFP2_OE : ASIC_QSFP1_OE, qsfp_mask);



	qsfp_mask = read_csr(dd,

		dd->hfi1_id ? ASIC_QSFP2_OUT : ASIC_QSFP1_OUT);

	qsfp_mask = read_csr(dd, dd->hfi1_id ?

				ASIC_QSFP2_OUT : ASIC_QSFP1_OUT);

	qsfp_mask &= ~mask;

	write_csr(dd,

		dd->hfi1_id ? ASIC_QSFP2_OUT : ASIC_QSFP1_OUT,

		qsfp_mask);

		dd->hfi1_id ? ASIC_QSFP2_OUT : ASIC_QSFP1_OUT, qsfp_mask);



	udelay(10);



	qsfp_mask |= mask;

	write_csr(dd,

		dd->hfi1_id ? ASIC_QSFP2_OUT : ASIC_QSFP1_OUT,

		qsfp_mask);

		dd->hfi1_id ? ASIC_QSFP2_OUT : ASIC_QSFP1_OUT, qsfp_mask);



	wait_for_qsfp_init(ppd);



	/*

	 * Allow INT_N to trigger the QSFP interrupt to watch

	 * for alarms and warnings

	 */

	set_qsfp_int_n(ppd, 1);

}



static int handle_qsfp_error_conditions(struct hfi1_pportdata *ppd,
@@ -9018,35 +9080,8 @@ static int handle_qsfp_error_conditions(struct hfi1_pportdata *ppd, 
	return 0;

}



static int do_pre_lni_host_behaviors(struct hfi1_pportdata *ppd)

{

	refresh_qsfp_cache(ppd, &ppd->qsfp_info);



	return 0;

}



static int do_qsfp_intr_fallback(struct hfi1_pportdata *ppd)

{

	struct hfi1_devdata *dd = ppd->dd;

	u8 qsfp_interrupt_status = 0;



	if (qsfp_read(ppd, dd->hfi1_id, 2, &qsfp_interrupt_status, 1)

		!= 1) {

		dd_dev_info(dd,

			"%s: Failed to read status of QSFP module\n",

			__func__);

		return -EIO;

	}



	/* We don't care about alarms & warnings with a non-functional INT_N */

	if (!(qsfp_interrupt_status & QSFP_DATA_NOT_READY))

		do_pre_lni_host_behaviors(ppd);



	return 0;

}



/* This routine will only be scheduled if the QSFP module is present */

static void qsfp_event(struct work_struct *work)

void qsfp_event(struct work_struct *work)

{

	struct qsfp_data *qd;

	struct hfi1_pportdata *ppd;
@@ -9068,21 +9103,21 @@ static void qsfp_event(struct work_struct *work) 
	dc_start(dd);



	if (qd->cache_refresh_required) {

		msleep(3000);

		reset_qsfp(ppd);



		/* Check for QSFP interrupt after t_init (SFF 8679)

		 * + extra

		set_qsfp_int_n(ppd, 0);



		wait_for_qsfp_init(ppd);



		/*

		 * Allow INT_N to trigger the QSFP interrupt to watch

		 * for alarms and warnings

		 */

		msleep(3000);

		if (!qd->qsfp_interrupt_functional) {

			if (do_qsfp_intr_fallback(ppd) < 0)

				dd_dev_info(dd, "%s: QSFP fallback failed\n",

					__func__);

			ppd->driver_link_ready = 1;

		set_qsfp_int_n(ppd, 1);



		tune_serdes(ppd);



		start_link(ppd);

	}

	}



	if (qd->check_interrupt_flags) {

		u8 qsfp_interrupt_status[16] = {0,};
@@ -9094,50 +9129,50 @@ static void qsfp_event(struct work_struct *work) 
				__func__);

		} else {

			unsigned long flags;

			u8 data_status;



			handle_qsfp_error_conditions(

					ppd, qsfp_interrupt_status);

			spin_lock_irqsave(&ppd->qsfp_info.qsfp_lock, flags);

			ppd->qsfp_info.check_interrupt_flags = 0;

			spin_unlock_irqrestore(&ppd->qsfp_info.qsfp_lock,

								flags);



			if (qsfp_read(ppd, dd->hfi1_id, 2, &data_status, 1)

				 != 1) {

				dd_dev_info(dd,

				"%s: Failed to read status of QSFP module\n",

					__func__);

			}

			if (!(data_status & QSFP_DATA_NOT_READY)) {

				do_pre_lni_host_behaviors(ppd);

				start_link(ppd);

			} else

				handle_qsfp_error_conditions(ppd,

						qsfp_interrupt_status);

		}

	}

}



void init_qsfp(struct hfi1_pportdata *ppd)

static void init_qsfp_int(struct hfi1_devdata *dd)

{

	struct hfi1_devdata *dd = ppd->dd;

	u64 qsfp_mask;

	struct hfi1_pportdata *ppd = dd->pport;

	u64 qsfp_mask, cce_int_mask;

	const int qsfp1_int_smask = QSFP1_INT % 64;

	const int qsfp2_int_smask = QSFP2_INT % 64;



	if (loopback == LOOPBACK_SERDES || loopback == LOOPBACK_LCB ||

			ppd->dd->icode == ICODE_FUNCTIONAL_SIMULATOR) {

		ppd->driver_link_ready = 1;

		return;

	/*

	 * disable QSFP1 interrupts for HFI1, QSFP2 interrupts for HFI0

	 * Qsfp1Int and Qsfp2Int are adjacent bits in the same CSR,

	 * therefore just one of QSFP1_INT/QSFP2_INT can be used to find

	 * the index of the appropriate CSR in the CCEIntMask CSR array

	 */

	cce_int_mask = read_csr(dd, CCE_INT_MASK +

				(8 * (QSFP1_INT / 64)));

	if (dd->hfi1_id) {

		cce_int_mask &= ~((u64)1 << qsfp1_int_smask);

		write_csr(dd, CCE_INT_MASK + (8 * (QSFP1_INT / 64)),

			  cce_int_mask);

	} else {

		cce_int_mask &= ~((u64)1 << qsfp2_int_smask);

		write_csr(dd, CCE_INT_MASK + (8 * (QSFP2_INT / 64)),

			  cce_int_mask);

	}



	ppd->qsfp_info.ppd = ppd;

	INIT_WORK(&ppd->qsfp_info.qsfp_work, qsfp_event);



	qsfp_mask = (u64)(QSFP_HFI0_INT_N | QSFP_HFI0_MODPRST_N);

	/* Clear current status to avoid spurious interrupts */

	write_csr(dd,

			dd->hfi1_id ?

				ASIC_QSFP2_CLEAR :

				ASIC_QSFP1_CLEAR,

	write_csr(dd, dd->hfi1_id ? ASIC_QSFP2_CLEAR : ASIC_QSFP1_CLEAR,

		  qsfp_mask);

	write_csr(dd, dd->hfi1_id ? ASIC_QSFP2_MASK : ASIC_QSFP1_MASK,

		  qsfp_mask);



	set_qsfp_int_n(ppd, 0);



	/* Handle active low nature of INT_N and MODPRST_N pins */

	if (qsfp_mod_present(ppd))
@@ -9145,29 +9180,6 @@ void init_qsfp(struct hfi1_pportdata *ppd) 
	write_csr(dd,

		  dd->hfi1_id ? ASIC_QSFP2_INVERT : ASIC_QSFP1_INVERT,

		  qsfp_mask);



	/* Allow only INT_N and MODPRST_N to trigger QSFP interrupts */

	qsfp_mask |= (u64)QSFP_HFI0_MODPRST_N;

	write_csr(dd,

		dd->hfi1_id ? ASIC_QSFP2_MASK : ASIC_QSFP1_MASK,

		qsfp_mask);



	if (qsfp_mod_present(ppd)) {

		msleep(3000);

		reset_qsfp(ppd);



		/* Check for QSFP interrupt after t_init (SFF 8679)

		 * + extra

		 */

		msleep(3000);

		if (!ppd->qsfp_info.qsfp_interrupt_functional) {

			if (do_qsfp_intr_fallback(ppd) < 0)

				dd_dev_info(dd,

					"%s: QSFP fallback failed\n",

					__func__);

			ppd->driver_link_ready = 1;

		}

	}

}



/*
@@ -9203,8 +9215,6 @@ int bringup_serdes(struct hfi1_pportdata *ppd) 
		ppd->guid = guid;

	}



	/* the link defaults to enabled */

	ppd->link_enabled = 1;

	/* Set linkinit_reason on power up per OPA spec */

	ppd->linkinit_reason = OPA_LINKINIT_REASON_LINKUP;
@@ -9217,6 +9227,12 @@ int bringup_serdes(struct hfi1_pportdata *ppd) 
			return ret;

	}



	/* tune the SERDES to a ballpark setting for

	 * optimal signal and bit error rate

	 * Needs to be done before starting the link

	 */

	tune_serdes(ppd);



	return start_link(ppd);

}
@@ -9234,6 +9250,8 @@ void hfi1_quiet_serdes(struct hfi1_pportdata *ppd) 
	ppd->driver_link_ready = 0;

	ppd->link_enabled = 0;



	ppd->offline_disabled_reason =

			HFI1_ODR_MASK(OPA_LINKDOWN_REASON_SMA_DISABLED);

	set_link_down_reason(ppd, OPA_LINKDOWN_REASON_SMA_DISABLED, 0,

	  OPA_LINKDOWN_REASON_SMA_DISABLED);

	set_link_state(ppd, HLS_DN_OFFLINE);
@@ -9649,6 +9667,12 @@ static int goto_offline(struct hfi1_pportdata *ppd, u8 rem_reason) 
	write_csr(dd, DC_LCB_ERR_EN, ~0ull); /* watch LCB errors */

	ppd->host_link_state = HLS_LINK_COOLDOWN; /* LCB access allowed */



	if (ppd->port_type == PORT_TYPE_QSFP &&

	    ppd->qsfp_info.limiting_active &&

	    qsfp_mod_present(ppd)) {

		set_qsfp_tx(ppd, 0);

	}



	/*

	 * The LNI has a mandatory wait time after the physical state

	 * moves to Offline.Quiet.  The wait time may be different
@@ -12078,31 +12102,11 @@ void set_intr_state(struct hfi1_devdata *dd, u32 enable) 
	 * In HFI, the mask needs to be 1 to allow interrupts.

	 */

	if (enable) {

		u64 cce_int_mask;

		const int qsfp1_int_smask = QSFP1_INT % 64;

		const int qsfp2_int_smask = QSFP2_INT % 64;



		/* enable all interrupts */

		for (i = 0; i < CCE_NUM_INT_CSRS; i++)

			write_csr(dd, CCE_INT_MASK + (8*i), ~(u64)0);



		/*

		 * disable QSFP1 interrupts for HFI1, QSFP2 interrupts for HFI0

		 * Qsfp1Int and Qsfp2Int are adjacent bits in the same CSR,

		 * therefore just one of QSFP1_INT/QSFP2_INT can be used to find

		 * the index of the appropriate CSR in the CCEIntMask CSR array

		 */

		cce_int_mask = read_csr(dd, CCE_INT_MASK +

						(8*(QSFP1_INT/64)));

		if (dd->hfi1_id) {

			cce_int_mask &= ~((u64)1 << qsfp1_int_smask);

			write_csr(dd, CCE_INT_MASK + (8*(QSFP1_INT/64)),

					cce_int_mask);

		} else {

			cce_int_mask &= ~((u64)1 << qsfp2_int_smask);

			write_csr(dd, CCE_INT_MASK + (8*(QSFP2_INT/64)),

					cce_int_mask);

		}

		init_qsfp_int(dd);

	} else {

		for (i = 0; i < CCE_NUM_INT_CSRS; i++)

			write_csr(dd, CCE_INT_MASK + (8*i), 0ull);

drivers/staging/rdma/hfi1/chip.h

+7 −1
Original line number Diff line number Diff line
@@ -371,6 +371,9 @@ 
#define NUM_LANE_FIELDS    0x8



/* 8051 general register Field IDs */

#define LINK_OPTIMIZATION_SETTINGS   0x00

#define LINK_TUNING_PARAMETERS	     0x02

#define DC_HOST_COMM_SETTINGS	     0x03

#define TX_SETTINGS		     0x06

#define VERIFY_CAP_LOCAL_PHY	     0x07

#define VERIFY_CAP_LOCAL_FABRIC	     0x08
@@ -647,10 +650,13 @@ void handle_link_down(struct work_struct *work); 
void handle_link_downgrade(struct work_struct *work);

void handle_link_bounce(struct work_struct *work);

void handle_sma_message(struct work_struct *work);

void reset_qsfp(struct hfi1_pportdata *ppd);

void qsfp_event(struct work_struct *work);

void start_freeze_handling(struct hfi1_pportdata *ppd, int flags);

int send_idle_sma(struct hfi1_devdata *dd, u64 message);

int load_8051_config(struct hfi1_devdata *, u8, u8, u32);

int read_8051_config(struct hfi1_devdata *, u8, u8, u32 *);

int start_link(struct hfi1_pportdata *ppd);

void init_qsfp(struct hfi1_pportdata *ppd);

int bringup_serdes(struct hfi1_pportdata *ppd);

void set_intr_state(struct hfi1_devdata *dd, u32 enable);

void apply_link_downgrade_policy(struct hfi1_pportdata *ppd,

drivers/staging/rdma/hfi1/hfi.h

+3 −2
Original line number Diff line number Diff line
@@ -74,7 +74,7 @@ 
#include "chip.h"

#include "mad.h"

#include "qsfp.h"

#include "platform_config.h"

#include "platform.h"



/* bumped 1 from s/w major version of TrueScale */

#define HFI1_CHIP_VERS_MAJ 3U
@@ -563,7 +563,8 @@ struct hfi1_pportdata { 
	struct kobject sl2sc_kobj;

	struct kobject vl2mtu_kobj;



	/* QSFP support */

	/* PHY support */

	u32 port_type;

	struct qsfp_data qsfp_info;



	/* GUID for this interface, in host order */

drivers/staging/rdma/hfi1/init.c

+3 −7
Original line number Diff line number Diff line
@@ -500,10 +500,13 @@ void hfi1_init_pportdata(struct pci_dev *pdev, struct hfi1_pportdata *ppd, 
	INIT_WORK(&ppd->sma_message_work, handle_sma_message);

	INIT_WORK(&ppd->link_bounce_work, handle_link_bounce);

	INIT_WORK(&ppd->linkstate_active_work, receive_interrupt_work);

	INIT_WORK(&ppd->qsfp_info.qsfp_work, qsfp_event);



	mutex_init(&ppd->hls_lock);

	spin_lock_init(&ppd->sdma_alllock);

	spin_lock_init(&ppd->qsfp_info.qsfp_lock);



	ppd->qsfp_info.ppd = ppd;

	ppd->sm_trap_qp = 0x0;

	ppd->sa_qp = 0x1;
@@ -781,13 +784,6 @@ done: 
		for (pidx = 0; pidx < dd->num_pports; ++pidx) {

			ppd = dd->pport + pidx;



			/* initialize the qsfp if it exists

			 * Requires interrupts to be enabled so we are notified

			 * when the QSFP completes reset, and has

			 * to be done before bringing up the SERDES

			 */

			init_qsfp(ppd);



			/* start the serdes - must be after interrupts are

			   enabled so we are notified when the link goes up */

			lastfail = bringup_serdes(ppd);

CRA Git | Maintained and supported by SUSTech CRA and CCSE