Commit 8e43e12d authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block 

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  xen-blkfront.c: make blkif_ioctl() static
  bio: make use of bvec_nr_vecs
  cciss: fix bug if scsi tape support is disabled
  cciss: add support for multi lun tape devices
  cciss: change the way we notify scsi midlayer of tape drives
  cciss: fix negative logical drive count in procfs
  cciss: remove redundant code
  cciss: make rebuild_lun_table behave better
  cciss: return -EFAULT if copy_from_user() fails
parents 01b09b6c 62aa0054

Documentation/cciss.txt

+6 −15
Original line number Diff line number Diff line
@@ -112,27 +112,18 @@ Hot plug support for SCSI tape drives 


Hot plugging of SCSI tape drives is supported, with some caveats.

The cciss driver must be informed that changes to the SCSI bus

have been made, in addition to and prior to informing the SCSI 

mid layer.  This may be done via the /proc filesystem.  For example:

have been made.  This may be done via the /proc filesystem.

For example:



	echo "rescan" > /proc/scsi/cciss0/1



This causes the adapter to query the adapter about changes to the 

This causes the driver to query the adapter about changes to the

physical SCSI buses and/or fibre channel arbitrated loop and the

driver to make note of any new or removed sequential access devices

or medium changers.  The driver will output messages indicating what 

devices have been added or removed and the controller, bus, target and 

lun used to address the device.  Once this is done, the SCSI mid layer 

can be informed of changes to the virtual SCSI bus which the driver 

presents to it in the usual way. For example: 



	echo scsi add-single-device 3 2 1 0 > /proc/scsi/scsi

 

to add a device on controller 3, bus 2, target 1, lun 0.   Note that

the driver makes an effort to preserve the devices positions

in the virtual SCSI bus, so if you are only moving tape drives 

around on the same adapter and not adding or removing tape drives 

from the adapter, informing the SCSI mid layer may not be necessary.

lun used to address the device.  It then notifies the SCSI mid layer

of these changes.



Note that the naming convention of the /proc filesystem entries 

contains a number in addition to the driver name.  (E.g. "cciss0"

drivers/block/cciss.c

+355 −393

File changed.

Preview size limit exceeded, changes collapsed.

drivers/block/cciss.h

+2 −0
Original line number Diff line number Diff line
@@ -39,6 +39,8 @@ typedef struct _drive_info_struct 
				   *to prevent it from being opened or it's queue

				   *from being started.

				  */

	__u8 serial_no[16]; /* from inquiry page 0x83, */

			    /* not necc. null terminated. */

} drive_info_struct;



#ifdef CONFIG_CISS_SCSI_TAPE

drivers/block/cciss_scsi.c

+154 −41
Original line number Diff line number Diff line
@@ -358,23 +358,68 @@ find_bus_target_lun(int ctlr, int *bus, int *target, int *lun) 
	}

	return (!found);	

}

struct scsi2map {

	char scsi3addr[8];

	int bus, target, lun;

};



static int 

cciss_scsi_add_entry(int ctlr, int hostno, 

		unsigned char *scsi3addr, int devtype)

		unsigned char *scsi3addr, int devtype,

		struct scsi2map *added, int *nadded)

{

	/* assumes hba[ctlr]->scsi_ctlr->lock is held */ 

	int n = ccissscsi[ctlr].ndevices;

	struct cciss_scsi_dev_t *sd;

	int i, bus, target, lun;

	unsigned char addr1[8], addr2[8];



	if (n >= CCISS_MAX_SCSI_DEVS_PER_HBA) {

		printk("cciss%d: Too many devices, "

			"some will be inaccessible.\n", ctlr);

		return -1;

	}



	bus = target = -1;

	lun = 0;

	/* Is this device a non-zero lun of a multi-lun device */

	/* byte 4 of the 8-byte LUN addr will contain the logical unit no. */

	if (scsi3addr[4] != 0) {

		/* Search through our list and find the device which */

		/* has the same 8 byte LUN address, excepting byte 4. */

		/* Assign the same bus and target for this new LUN. */

		/* Use the logical unit number from the firmware. */

		memcpy(addr1, scsi3addr, 8);

		addr1[4] = 0;

		for (i = 0; i < n; i++) {

			sd = &ccissscsi[ctlr].dev[i];

			memcpy(addr2, sd->scsi3addr, 8);

			addr2[4] = 0;

			/* differ only in byte 4? */

			if (memcmp(addr1, addr2, 8) == 0) {

				bus = sd->bus;

				target = sd->target;

				lun = scsi3addr[4];

				break;

			}

		}

	}



	sd = &ccissscsi[ctlr].dev[n];

	if (find_bus_target_lun(ctlr, &sd->bus, &sd->target, &sd->lun) != 0)

	if (lun == 0) {

		if (find_bus_target_lun(ctlr,

			&sd->bus, &sd->target, &sd->lun) != 0)

			return -1;

	} else {

		sd->bus = bus;

		sd->target = target;

		sd->lun = lun;

	}

	added[*nadded].bus = sd->bus;

	added[*nadded].target = sd->target;

	added[*nadded].lun = sd->lun;

	(*nadded)++;



	memcpy(&sd->scsi3addr[0], scsi3addr, 8);

	sd->devtype = devtype;

	ccissscsi[ctlr].ndevices++;
@@ -390,7 +435,8 @@ cciss_scsi_add_entry(int ctlr, int hostno, 
}



static void

cciss_scsi_remove_entry(int ctlr, int hostno, int entry)

cciss_scsi_remove_entry(int ctlr, int hostno, int entry,

	struct scsi2map *removed, int *nremoved)

{

	/* assumes hba[ctlr]->scsi_ctlr->lock is held */ 

	int i;
@@ -398,6 +444,10 @@ cciss_scsi_remove_entry(int ctlr, int hostno, int entry) 


	if (entry < 0 || entry >= CCISS_MAX_SCSI_DEVS_PER_HBA) return;

	sd = ccissscsi[ctlr].dev[entry];

	removed[*nremoved].bus    = sd.bus;

	removed[*nremoved].target = sd.target;

	removed[*nremoved].lun    = sd.lun;

	(*nremoved)++;

	for (i=entry;i<ccissscsi[ctlr].ndevices-1;i++)

		ccissscsi[ctlr].dev[i] = ccissscsi[ctlr].dev[i+1];

	ccissscsi[ctlr].ndevices--;
@@ -417,6 +467,26 @@ cciss_scsi_remove_entry(int ctlr, int hostno, int entry) 
	(a)[1] == (b)[1] && \

	(a)[0] == (b)[0])



static void fixup_botched_add(int ctlr, char *scsi3addr)

{

	/* called when scsi_add_device fails in order to re-adjust */

	/* ccissscsi[] to match the mid layer's view. */

	unsigned long flags;

	int i, j;

	CPQ_TAPE_LOCK(ctlr, flags);

	for (i = 0; i < ccissscsi[ctlr].ndevices; i++) {

		if (memcmp(scsi3addr,

				ccissscsi[ctlr].dev[i].scsi3addr, 8) == 0) {

			for (j = i; j < ccissscsi[ctlr].ndevices-1; j++)

				ccissscsi[ctlr].dev[j] =

					ccissscsi[ctlr].dev[j+1];

			ccissscsi[ctlr].ndevices--;

			break;

		}

	}

	CPQ_TAPE_UNLOCK(ctlr, flags);

}



static int

adjust_cciss_scsi_table(int ctlr, int hostno,

	struct cciss_scsi_dev_t sd[], int nsds)
@@ -429,13 +499,33 @@ adjust_cciss_scsi_table(int ctlr, int hostno, 
	int i,j, found, changes=0;

	struct cciss_scsi_dev_t *csd;

	unsigned long flags;

	struct scsi2map *added, *removed;

	int nadded, nremoved;

	struct Scsi_Host *sh = NULL;



	added = kzalloc(sizeof(*added) * CCISS_MAX_SCSI_DEVS_PER_HBA,

			GFP_KERNEL);

	removed = kzalloc(sizeof(*removed) * CCISS_MAX_SCSI_DEVS_PER_HBA,

			GFP_KERNEL);



	if (!added || !removed) {

		printk(KERN_WARNING "cciss%d: Out of memory in "

			"adjust_cciss_scsi_table\n", ctlr);

		goto free_and_out;

	}



	CPQ_TAPE_LOCK(ctlr, flags);



	if (hostno != -1)  /* if it's not the first time... */

		sh = ((struct cciss_scsi_adapter_data_t *)

			hba[ctlr]->scsi_ctlr)->scsi_host;



	/* find any devices in ccissscsi[] that are not in 

	   sd[] and remove them from ccissscsi[] */



	i = 0;

	nremoved = 0;

	nadded = 0;

	while(i<ccissscsi[ctlr].ndevices) {

		csd = &ccissscsi[ctlr].dev[i];

		found=0;
@@ -455,8 +545,9 @@ adjust_cciss_scsi_table(int ctlr, int hostno, 
			/* printk("cciss%d: %s device c%db%dt%dl%d removed.\n",

				ctlr, scsi_device_type(csd->devtype), hostno,

					csd->bus, csd->target, csd->lun); */

			cciss_scsi_remove_entry(ctlr, hostno, i);

			/* note, i not incremented */

			cciss_scsi_remove_entry(ctlr, hostno, i,

				removed, &nremoved);

			/* remove ^^^, hence i not incremented */

		} 

		else if (found == 1) { /* device is different kind */

			changes++;
@@ -464,8 +555,15 @@ adjust_cciss_scsi_table(int ctlr, int hostno, 
				"(device type now %s).\n",

				ctlr, hostno, csd->bus, csd->target, csd->lun,

					scsi_device_type(csd->devtype));

			cciss_scsi_remove_entry(ctlr, hostno, i,

				removed, &nremoved);

			/* remove ^^^, hence i not incremented */

			if (cciss_scsi_add_entry(ctlr, hostno,

				&sd[j].scsi3addr[0], sd[j].devtype,

				added, &nadded) != 0)

				/* we just removed one, so add can't fail. */

					BUG();

			csd->devtype = sd[j].devtype;

			i++;	/* so just move along. */

		} else 		/* device is same as it ever was, */

			i++;	/* so just move along. */

	}
@@ -489,7 +587,9 @@ adjust_cciss_scsi_table(int ctlr, int hostno, 
		if (!found) {

			changes++;

			if (cciss_scsi_add_entry(ctlr, hostno, 

				&sd[i].scsi3addr[0], sd[i].devtype) != 0)



				&sd[i].scsi3addr[0], sd[i].devtype,

				added, &nadded) != 0)

				break;

		} else if (found == 1) {

			/* should never happen... */
@@ -501,9 +601,50 @@ adjust_cciss_scsi_table(int ctlr, int hostno, 
	}

	CPQ_TAPE_UNLOCK(ctlr, flags);



	if (!changes) 

		printk("cciss%d: No device changes detected.\n", ctlr);



	/* Don't notify scsi mid layer of any changes the first time through */

	/* (or if there are no changes) scsi_scan_host will do it later the */

	/* first time through. */

	if (hostno == -1 || !changes)

		goto free_and_out;



	/* Notify scsi mid layer of any removed devices */

	for (i = 0; i < nremoved; i++) {

		struct scsi_device *sdev =

			scsi_device_lookup(sh, removed[i].bus,

				removed[i].target, removed[i].lun);

		if (sdev != NULL) {

			scsi_remove_device(sdev);

			scsi_device_put(sdev);

		} else {

			/* We don't expect to get here. */

			/* future cmds to this device will get selection */

			/* timeout as if the device was gone. */

			printk(KERN_WARNING "cciss%d: didn't find "

				"c%db%dt%dl%d\n for removal.",

				ctlr, hostno, removed[i].bus,

				removed[i].target, removed[i].lun);

		}

	}



	/* Notify scsi mid layer of any added devices */

	for (i = 0; i < nadded; i++) {

		int rc;

		rc = scsi_add_device(sh, added[i].bus,

			added[i].target, added[i].lun);

		if (rc == 0)

			continue;

		printk(KERN_WARNING "cciss%d: scsi_add_device "

			"c%db%dt%dl%d failed, device not added.\n",

			ctlr, hostno,

			added[i].bus, added[i].target, added[i].lun);

		/* now we have to remove it from ccissscsi, */

		/* since it didn't get added to scsi mid layer */

		fixup_botched_add(ctlr, added[i].scsi3addr);

	}



free_and_out:

	kfree(added);

	kfree(removed);

	return 0;

}
@@ -1354,32 +1495,6 @@ cciss_unregister_scsi(int ctlr) 
	kfree(sa);

}



static int 

cciss_register_scsi(int ctlr)

{

	unsigned long flags;



	CPQ_TAPE_LOCK(ctlr, flags);



	/* Since this is really a block driver, the SCSI core may not be 

	   initialized at init time, in which case, calling scsi_register_host

	   would hang.  Instead, we do it later, via /proc filesystem

	   and rc scripts, when we know SCSI core is good to go. */



	/* Only register if SCSI devices are detected. */

	if (ccissscsi[ctlr].ndevices != 0) {

		((struct cciss_scsi_adapter_data_t *) 

			hba[ctlr]->scsi_ctlr)->registered = 1;

		CPQ_TAPE_UNLOCK(ctlr, flags);

		return cciss_scsi_detect(ctlr);

	}

	CPQ_TAPE_UNLOCK(ctlr, flags);

	printk(KERN_INFO 

		"cciss%d: No appropriate SCSI device detected, "

		"SCSI subsystem not engaged.\n", ctlr);

	return 0;

}



static int 

cciss_engage_scsi(int ctlr)

{
@@ -1391,15 +1506,15 @@ cciss_engage_scsi(int ctlr) 
	sa = (struct cciss_scsi_adapter_data_t *) hba[ctlr]->scsi_ctlr;

	stk = &sa->cmd_stack; 



	if (((struct cciss_scsi_adapter_data_t *) 

		hba[ctlr]->scsi_ctlr)->registered) {

	if (sa->registered) {

		printk("cciss%d: SCSI subsystem already engaged.\n", ctlr);

		spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);

		return ENXIO;

	}

	sa->registered = 1;

	spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);

	cciss_update_non_disk_devices(ctlr, -1);

	cciss_register_scsi(ctlr);

	cciss_scsi_detect(ctlr);

	return 0;

}
@@ -1493,7 +1608,5 @@ static int cciss_eh_abort_handler(struct scsi_cmnd *scsicmd) 
/* If no tape support, then these become defined out of existence */



#define cciss_scsi_setup(cntl_num)

#define cciss_unregister_scsi(ctlr)

#define cciss_register_scsi(ctlr)



#endif /* CONFIG_CISS_SCSI_TAPE */

drivers/block/xen-blkfront.c

+2 −2
Original line number Diff line number Diff line
@@ -154,7 +154,7 @@ static int blkif_getgeo(struct block_device *bd, struct hd_geometry *hg) 
	return 0;

}



int blkif_ioctl(struct inode *inode, struct file *filep,

static int blkif_ioctl(struct inode *inode, struct file *filep,

		       unsigned command, unsigned long argument)

{

	struct blkfront_info *info =

CRA Git | Maintained and supported by SUSTech CRA and CCSE