+226
−3
+11
−8
+7
−1
Loading
Gitlab 现已全面支持 git over ssh 与 git over https。通过 HTTPS 访问请配置带有 read_repository / write_repository 权限的 Personal access token。通过 SSH 端口访问请使用 22 端口或 13389 端口。如果使用CAS注册了账户但不知道密码,可以自行至设置中更改;如有其他问题,请发邮件至 service@cra.moe 寻求协助。
PD 3.0 spec defines a new mechanism for power role swap called Fast role swap. This change enables TCPM to support FRS when acting as sink. Once the explicit contract is negotiated, sink port is expected to query the source port for sink caps to determine whether the source is FRS capable. Bits 23 & 24 of fixed pdo of the sink caps from the source, when set, indicates the current needed by the source when fast role swap is in progress(Implicit contract phasae). 0 indicates that the source does not support Fast Role Swap. Upon receiving the FRS signal from the source, TCPC(TCPM_FRS_EVENT) informs TCPM to start the Fast role swap sequence. 1. TCPM sends FRS PD message: FR_SWAP_SEND 2. If response is not received within the expiry of SenderResponseTimer, Error recovery is triggered.: FR_SWAP_SEND_TIMEOUT 3. Upon receipt of the accept message, TCPM waits for PSSourceOffTimer for PS_READY message from the partner: FR_SWAP_SNK_SRC_NEW_SINK_READY. TCPC is expected to autonomously turn on vbus once the FRS signal is received and vbus voltage falls below vsafe5v within tSrcFrSwap. This is different from traditional power role swap where the vbus sourcing is turned on by TCPM. 4. By this time, TCPC most likely would have started to source vbus, TCPM waits for tSrcFrSwap to see if the lower level TCPC driver signals TCPM_SOURCING_VBUS event: FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED. 5. When TCPC signals sourcing vbus, TCPM sends PS_READY msg and changes the CC pin from Rd to Rp. This is the end of fast role swap sequence and TCPM initiates the sequnce to negotiate explicit contract by transitioning into SRC_STARTUP after SwapSrcStart. The code is written based on the sequence described in "Figure 8-107: Dual-role Port in Sink to Source Fast Role Swap State Diagram" of USB Power Delivery Specification Revision 3.0, Version 1.2. Signed-off-by:Badhri Jagan Sridharan <badhri@google.com> Reviewed-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20201008061556.1402293-7-badhri@google.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CRA Git | Maintained and supported by SUSTech CRA and CCSE