Commit 8d19534a authored by Geert Uytterhoeven's avatar Geert Uytterhoeven Committed by Mark Brown
Browse files

spi: sh-msiof: Use the core cs_gpio field, and make it optional 



In current implementation, CS is controlled by GPIO, which is passed
through spi->controller_data.  However, the MSIOF HW module has a function
to output CS by itself, which is already enabled and actual switch will be
done by pinmux.

Store the GPIO number in the core cs_gpio field, and ignore it if it is
an invalid (negative) GPIO number.

Loosely based on a patch from Takashi Yoshii <takasi-y@ops.dti.ne.jp>.

Signed-off-by: default avatarGeert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: default avatarMark Brown <broonie@linaro.org>
parent 01cfef57

drivers/spi/spi-sh-msiof.c

+18 −3
Original line number Diff line number Diff line
@@ -446,6 +446,21 @@ static int sh_msiof_spi_setup_transfer(struct spi_device *spi, 
	return spi_bitbang_setup_transfer(spi, t);

}



static int sh_msiof_spi_setup(struct spi_device *spi)

{

	struct device_node	*np = spi->master->dev.of_node;



	if (!np) {

		/*

		 * Use spi->controller_data for CS (same strategy as spi_gpio),

		 * if any. otherwise let HW control CS

		 */

		spi->cs_gpio = (uintptr_t)spi->controller_data;

	}



	return spi_bitbang_setup(spi);

}



static void sh_msiof_spi_chipselect(struct spi_device *spi, int is_on)

{

	struct sh_msiof_spi_priv *p = spi_master_get_devdata(spi->master);
@@ -471,8 +486,8 @@ static void sh_msiof_spi_chipselect(struct spi_device *spi, int is_on) 
					  !!(spi->mode & SPI_CS_HIGH));

	}



	/* use spi->controller data for CS (same strategy as spi_gpio) */

	gpio_set_value((uintptr_t)spi->controller_data, value);

	if (spi->cs_gpio >= 0)

		gpio_set_value(spi->cs_gpio, value);



	if (is_on == BITBANG_CS_INACTIVE) {

		if (test_and_clear_bit(0, &p->flags)) {
@@ -759,7 +774,7 @@ static int sh_msiof_spi_probe(struct platform_device *pdev) 
	master->bus_num = pdev->id;

	master->dev.of_node = pdev->dev.of_node;

	master->num_chipselect = p->info->num_chipselect;

	master->setup = spi_bitbang_setup;

	master->setup = sh_msiof_spi_setup;

	master->cleanup = spi_bitbang_cleanup;



	p->bitbang.master = master;

CRA Git | Maintained and supported by SUSTech CRA and CCSE