Merge branch 'perf/urgent' into perf/core, before applying dependent patches (8d12ded3) · Commits · 戴 / test

CREDITS

+7 −0

Original line number	Diff line number	Diff line
		@@ -3709,6 +3709,13 @@ N: Dirk Verworner
		D: Co-author of German book ``Linux-Kernel-Programmierung''
		D: Co-founder of Berlin Linux User Group

		N: Andrew Victor
		E: linux@maxim.org.za
		W: http://maxim.org.za/at91_26.html
		D: First maintainer of Atmel ARM-based SoC, aka AT91
		D: Introduced support for at91rm9200, the first chip of AT91 family
		S: South Africa

		N: Riku Voipio
		E: riku.voipio@iki.fi
		D: Author of PCA9532 LED and Fintek f75375s hwmon driver

+1 −0

Original line number	Diff line number	Diff line
		@@ -6,6 +6,7 @@ provided by Arteris.
		Required properties:
		- compatible : Should be "ti,omap3-l3-smx" for OMAP3 family
		Should be "ti,omap4-l3-noc" for OMAP4 family
		Should be "ti,omap5-l3-noc" for OMAP5 family
		Should be "ti,dra7-l3-noc" for DRA7 family
		Should be "ti,am4372-l3-noc" for AM43 family
		- reg: Contains L3 register address range for each noc domain.

+3 −1

Original line number	Diff line number	Diff line
		@@ -17,7 +17,8 @@ Required properties:
		- #clock-cells: from common clock binding; shall be set to 1.
		- clocks: from common clock binding; list of parent clock
		handles, shall be xtal reference clock or xtal and clkin for
		si5351c only.
		si5351c only. Corresponding clock input names are "xtal" and
		"clkin" respectively.
		- #address-cells: shall be set to 1.
		- #size-cells: shall be set to 0.

		@@ -71,6 +72,7 @@ i2c-master-node {

		/* connect xtal input to 25MHz reference */
		clocks = <&ref25>;
		clock-names = "xtal";

		/* connect xtal input as source of pll0 and pll1 */
		silabs,pll-source = <0 0>, <1 0>;

+1 −1

Original line number	Diff line number	Diff line
		@@ -38,7 +38,7 @@ dma_apbx: dma-apbx@80024000 {
		80 81 68 69
		70 71 72 73
		74 75 76 77>;
		interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",
		interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
		"saif0", "saif1", "i2c0", "i2c1",
		"auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
		"auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";

+3 −3

Original line number	Diff line number	Diff line
		@@ -8,8 +8,8 @@ Required properties:
		is not Linux-only, but in case of Linux, see the "m25p_ids"
		table in drivers/mtd/devices/m25p80.c for the list of supported
		chips.
		Must also include "nor-jedec" for any SPI NOR flash that can be
		identified by the JEDEC READ ID opcode (0x9F).
		Must also include "jedec,spi-nor" for any SPI NOR flash that can
		be identified by the JEDEC READ ID opcode (0x9F).
		- reg : Chip-Select number
		- spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at

		@@ -25,7 +25,7 @@ Example:
		flash: m25p80@0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "spansion,m25p80", "nor-jedec";
		compatible = "spansion,m25p80", "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <40000000>;
		m25p,fast-read;