Commit 8ab68ab4 authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6 

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (35 commits)
  siimage: coding style cleanup (take 2)
  ide-cd: clean up cdrom_analyze_sense_data()
  ide-cd: fix test unsigned var < 0
  ide: add TSSTcorp CDDVDW SH-S202H to ivb_list[]
  piix: add Asus Eee 701 controller to short cable list
  ARM: always select HAVE_IDE
  remove the broken ETRAX_IDE driver
  ide: remove ->dma_prdtable field from ide_hwif_t
  ide: remove ->dma_vendor{1,3} fields from ide_hwif_t
  scc_pata: add ->dma_host_set and ->dma_start methods
  ide: skip "VLB sync" if host uses MMIO
  ide: add ide_pad_transfer() helper
  ide: remove ->INW and ->OUTW methods
  ide: use IDE I/O helpers directly in ide_tf_{load,read}()
  ns87415: add ->tf_read method
  scc_pata: add ->tf_{load,read} methods
  ide-h8300: add ->tf_{load,read} methods
  ide-cris: add ->tf_{load,read} methods
  ide: add ->tf_load and ->tf_read methods
  ide: move ide_tf_{load,read} to ide-iops.c
  ...
parents f05c463b 7b255436

arch/arm/Kconfig

+1 −14
Original line number Diff line number Diff line
@@ -8,6 +8,7 @@ mainmenu "Linux Kernel Configuration" 
config ARM

	bool

	default y

	select HAVE_IDE

	select RTC_LIB

	select SYS_SUPPORTS_APM_EMULATION

	select HAVE_OPROFILE
@@ -223,7 +224,6 @@ config ARCH_CLPS7500 
	select TIMER_ACORN

	select ISA

	select NO_IOPORT

	select HAVE_IDE

	help

	  Support for the Cirrus Logic PS7500FE system-on-a-chip.
@@ -236,7 +236,6 @@ config ARCH_CO285 
	bool "Co-EBSA285"

	select FOOTBRIDGE

	select FOOTBRIDGE_ADDIN

	select HAVE_IDE

	help

	  Support for Intel's EBSA285 companion chip.
@@ -262,7 +261,6 @@ config ARCH_EP93XX 
config ARCH_FOOTBRIDGE

	bool "FootBridge"

	select FOOTBRIDGE

	select HAVE_IDE

	help

	  Support for systems based on the DC21285 companion chip

	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
@@ -301,7 +299,6 @@ config ARCH_IOP32X 
	depends on MMU

	select PLAT_IOP

	select PCI

	select HAVE_IDE

	help

	  Support for Intel's 80219 and IOP32X (XScale) family of

	  processors.
@@ -311,14 +308,12 @@ config ARCH_IOP33X 
	depends on MMU

	select PLAT_IOP

	select PCI

	select HAVE_IDE

	help

	  Support for Intel's IOP33X (XScale) family of processors.



config ARCH_IXP23XX

 	bool "IXP23XX-based"

	depends on MMU

	select HAVE_IDE

 	select PCI

	help

	  Support for Intel's IXP23xx (XScale) family of processors.
@@ -336,14 +331,12 @@ config ARCH_IXP4XX 
	select GENERIC_GPIO

	select GENERIC_TIME

	select GENERIC_CLOCKEVENTS

	select HAVE_IDE

	help

	  Support for Intel's IXP4XX (XScale) family of processors.



config ARCH_L7200

	bool "LinkUp-L7200"

	select FIQ

	select HAVE_IDE

	help

	  Say Y here if you intend to run this kernel on a LinkUp Systems

	  L7200 Software Development Board which uses an ARM720T processor.
@@ -400,7 +393,6 @@ config ARCH_PXA 
	depends on MMU

	select ARCH_MTD_XIP

	select GENERIC_GPIO

	select HAVE_IDE

	select HAVE_GPIO_LIB

	select GENERIC_TIME

	select GENERIC_CLOCKEVENTS
@@ -416,7 +408,6 @@ config ARCH_RPC 
	select ARCH_MAY_HAVE_PC_FDC

	select ISA_DMA_API

	select NO_IOPORT

	select HAVE_IDE

	help

	  On the Acorn Risc-PC, Linux can support the internal IDE disk and

	  CD-ROM interface, serial and parallel port, and the floppy drive.
@@ -432,7 +423,6 @@ config ARCH_SA1100 
	select GENERIC_TIME

	select GENERIC_CLOCKEVENTS

	select TICK_ONESHOT

	select HAVE_IDE

	select HAVE_GPIO_LIB

	help

	  Support for StrongARM 11x0 based boards.
@@ -440,7 +430,6 @@ config ARCH_SA1100 
config ARCH_S3C2410

	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"

	select GENERIC_GPIO

	select HAVE_IDE

	help

	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics

	  BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
@@ -448,7 +437,6 @@ config ARCH_S3C2410 


config ARCH_SHARK

	bool "Shark"

	select HAVE_IDE

	select ISA

	select ISA_DMA

	select PCI
@@ -458,7 +446,6 @@ config ARCH_SHARK 


config ARCH_LH7A40X

	bool "Sharp LH7A40X"

	select HAVE_IDE

	help

	  Say Y here for systems based on one of the Sharp LH7A40X

	  System on a Chip processors.  These CPUs include an ARM922T

drivers/ide/Kconfig

+0 −34
Original line number Diff line number Diff line
@@ -862,40 +862,6 @@ config BLK_DEV_IDE_BAST 
	  Say Y here if you want to support the onboard IDE channels on the

	  Simtec BAST or the Thorcom VR1000



config ETRAX_IDE

	tristate "ETRAX IDE support"

	depends on CRIS && BROKEN

	select BLK_DEV_IDEDMA

	help

	  Enables the ETRAX IDE driver.



	  You can't use parallel ports or SCSI ports at the same time.



config ETRAX_IDE_DELAY

	int "Delay for drives to regain consciousness"

	depends on ETRAX_IDE && ETRAX_ARCH_V10

	default 15

	help

	  Number of seconds to wait for IDE drives to spin up after an IDE

	  reset.



choice

	prompt "IDE reset pin"

	depends on ETRAX_IDE && ETRAX_ARCH_V10

	default ETRAX_IDE_PB7_RESET



config ETRAX_IDE_PB7_RESET

	bool "Port_PB_Bit_7"

	help

	  IDE reset on pin 7 on port B



config ETRAX_IDE_G27_RESET

	bool "Port_G_Bit_27"

	help

	  IDE reset on pin 27 on port G



endchoice



config IDE_H8300

	tristate "H8300 IDE support"

	depends on H8300

drivers/ide/Makefile

+1 −1
Original line number Diff line number Diff line
@@ -35,7 +35,7 @@ ifeq ($(CONFIG_BLK_DEV_CMD640), y) 
	obj-y += cmd640-core.o

endif



obj-$(CONFIG_BLK_DEV_IDE)		+= cris/ ppc/

obj-$(CONFIG_BLK_DEV_IDE)		+= ppc/

obj-$(CONFIG_IDE_H8300)			+= h8300/

obj-$(CONFIG_IDE_GENERIC)		+= ide-generic.o

obj-$(CONFIG_BLK_DEV_IDEPNP)		+= ide-pnp.o

drivers/ide/arm/icside.c

+1 −1
Original line number Diff line number Diff line
@@ -483,7 +483,7 @@ static const struct ide_port_info icside_v6_port_info __initdata = { 
	.init_dma		= icside_dma_off_init,

	.port_ops		= &icside_v6_no_dma_port_ops,

	.dma_ops		= &icside_v6_dma_ops,

	.host_flags		= IDE_HFLAG_SERIALIZE,

	.host_flags		= IDE_HFLAG_SERIALIZE | IDE_HFLAG_MMIO,

	.mwdma_mask		= ATA_MWDMA2,

	.swdma_mask		= ATA_SWDMA2,

};

drivers/ide/arm/palm_bk3710.c

+1 −0
Original line number Diff line number Diff line
@@ -342,6 +342,7 @@ static const struct ide_port_ops palm_bk3710_ports_ops = { 
static const struct ide_port_info __devinitdata palm_bk3710_port_info = {

	.init_dma		= palm_bk3710_init_dma,

	.port_ops		= &palm_bk3710_ports_ops,

	.host_flags		= IDE_HFLAG_MMIO,

	.pio_mask		= ATA_PIO4,

	.udma_mask		= ATA_UDMA4,	/* (input clk 99MHz) */

	.mwdma_mask		= ATA_MWDMA2,

CRA Git | Maintained and supported by SUSTech CRA and CCSE