Commit 8a82b408 authored by Krzysztof Kozlowski's avatar Krzysztof Kozlowski Committed by Lee Jones
Browse files

regulator: max14577: Add support for MAX77836 regulators 



Add support for MAX77836 chipset and its additional two LDO regulators.
These LDO regulators are controlled by the PMIC block with additional
regmap (different I2C slave address).

The MAX77836 charger and safeout regulators are almost identical to
MAX14577. The registers layout is the same, except values for charger's
current. The patch adds simple mapping between device type and supported
current by the charger regulator.

Signed-off-by: default avatarKrzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: default avatarMark Brown <broonie@linaro.org>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
parent 4706a525

drivers/regulator/Kconfig

+4 −3
Original line number Diff line number Diff line
@@ -266,11 +266,12 @@ config REGULATOR_LP8788 
	  This driver supports LP8788 voltage regulator chip.



config REGULATOR_MAX14577

	tristate "Maxim 14577 regulator"

	tristate "Maxim 14577/77836 regulator"

	depends on MFD_MAX14577

	help

	  This driver controls a Maxim 14577 regulator via I2C bus.

	  The regulators include safeout LDO and current regulator 'CHARGER'.

	  This driver controls a Maxim MAX14577/77836 regulator via I2C bus.

	  The MAX14577 regulators include safeout LDO and charger current

	  regulator. The MAX77836 has two additional LDOs.



config REGULATOR_MAX1586

	tristate "Maxim 1586/1587 voltage regulator"

drivers/regulator/max14577.c

+242 −35
Original line number Diff line number Diff line 
/*

 * max14577.c - Regulator driver for the Maxim 14577

 * max14577.c - Regulator driver for the Maxim 14577/77836

 *

 * Copyright (C) 2013,2014 Samsung Electronics

 * Krzysztof Kozlowski <k.kozlowski@samsung.com>
@@ -22,6 +22,42 @@ 
#include <linux/mfd/max14577-private.h>

#include <linux/regulator/of_regulator.h>



/*

 * Valid limits of current for max14577 and max77836 chargers.

 * They must correspond to MBCICHWRCL and MBCICHWRCH fields in CHGCTRL4

 * register for given chipset.

 */

struct maxim_charger_current {

	/* Minimal current, set in CHGCTRL4/MBCICHWRCL, uA */

	unsigned int min;

	/*

	 * Minimal current when high setting is active,

	 * set in CHGCTRL4/MBCICHWRCH, uA

	 */

	unsigned int high_start;

	/* Value of one step in high setting, uA */

	unsigned int high_step;

	/* Maximum current of high setting, uA */

	unsigned int max;

};



/* Table of valid charger currents for different Maxim chipsets */

static const struct maxim_charger_current maxim_charger_currents[] = {

	[MAXIM_DEVICE_TYPE_UNKNOWN] = { 0, 0, 0, 0 },

	[MAXIM_DEVICE_TYPE_MAX14577] = {

		.min		= MAX14577_REGULATOR_CURRENT_LIMIT_MIN,

		.high_start	= MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_START,

		.high_step	= MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_STEP,

		.max		= MAX14577_REGULATOR_CURRENT_LIMIT_MAX,

	},

	[MAXIM_DEVICE_TYPE_MAX77836] = {

		.min		= MAX77836_REGULATOR_CURRENT_LIMIT_MIN,

		.high_start	= MAX77836_REGULATOR_CURRENT_LIMIT_HIGH_START,

		.high_step	= MAX77836_REGULATOR_CURRENT_LIMIT_HIGH_STEP,

		.max		= MAX77836_REGULATOR_CURRENT_LIMIT_MAX,

	},

};



static int max14577_reg_is_enabled(struct regulator_dev *rdev)

{

	int rid = rdev_get_id(rdev);
@@ -47,6 +83,9 @@ static int max14577_reg_get_current_limit(struct regulator_dev *rdev) 
{

	u8 reg_data;

	struct regmap *rmap = rdev->regmap;

	struct max14577 *max14577 = rdev_get_drvdata(rdev);

	const struct maxim_charger_current *limits =

		&maxim_charger_currents[max14577->dev_type];



	if (rdev_get_id(rdev) != MAX14577_CHARGER)

		return -EINVAL;
@@ -54,12 +93,11 @@ static int max14577_reg_get_current_limit(struct regulator_dev *rdev) 
	max14577_read_reg(rmap, MAX14577_CHG_REG_CHG_CTRL4, &reg_data);



	if ((reg_data & CHGCTRL4_MBCICHWRCL_MASK) == 0)

		return MAX14577_REGULATOR_CURRENT_LIMIT_MIN;

		return limits->min;



	reg_data = ((reg_data & CHGCTRL4_MBCICHWRCH_MASK) >>

			CHGCTRL4_MBCICHWRCH_SHIFT);

	return MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_START +

		reg_data * MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_STEP;

	return limits->high_start + reg_data * limits->high_step;

}



static int max14577_reg_set_current_limit(struct regulator_dev *rdev,
@@ -67,33 +105,39 @@ static int max14577_reg_set_current_limit(struct regulator_dev *rdev, 
{

	int i, current_bits = 0xf;

	u8 reg_data;

	struct max14577 *max14577 = rdev_get_drvdata(rdev);

	const struct maxim_charger_current *limits =

		&maxim_charger_currents[max14577->dev_type];



	if (rdev_get_id(rdev) != MAX14577_CHARGER)

		return -EINVAL;



	if (min_uA > MAX14577_REGULATOR_CURRENT_LIMIT_MAX ||

			max_uA < MAX14577_REGULATOR_CURRENT_LIMIT_MIN)

	if (min_uA > limits->max || max_uA < limits->min)

		return -EINVAL;



	if (max_uA < MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_START) {

		/* Less than 200 mA, so set 90mA (turn only Low Bit off) */

	if (max_uA < limits->high_start) {

		/*

		 * Less than high_start,

		 * so set the minimal current (turn only Low Bit off)

		 */

		u8 reg_data = 0x0 << CHGCTRL4_MBCICHWRCL_SHIFT;

		return max14577_update_reg(rdev->regmap,

				MAX14577_CHG_REG_CHG_CTRL4,

				CHGCTRL4_MBCICHWRCL_MASK, reg_data);

	}



	/* max_uA is in range: <LIMIT_HIGH_START, inifinite>, so search for

	 * valid current starting from LIMIT_MAX. */

	for (i = MAX14577_REGULATOR_CURRENT_LIMIT_MAX;

			i >= MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_START;

			i -= MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_STEP) {

	/*

	 * max_uA is in range: <high_start, inifinite>, so search for

	 * valid current starting from maximum current.

	 */

	for (i = limits->max; i >= limits->high_start; i -= limits->high_step) {

		if (i <= max_uA)

			break;

		current_bits--;

	}

	BUG_ON(current_bits < 0); /* Cannot happen */

	/* Turn Low Bit on (use range 200mA-950 mA) */



	/* Turn Low Bit on (use range high_start-max)... */

	reg_data = 0x1 << CHGCTRL4_MBCICHWRCL_SHIFT;

	/* and set proper High Bits */

	reg_data |= current_bits << CHGCTRL4_MBCICHWRCH_SHIFT;
@@ -118,7 +162,41 @@ static struct regulator_ops max14577_charger_ops = { 
	.set_current_limit	= max14577_reg_set_current_limit,

};



static const struct regulator_desc supported_regulators[] = {

static const struct regulator_desc max14577_supported_regulators[] = {

	[MAX14577_SAFEOUT] = {

		.name		= "SAFEOUT",

		.id		= MAX14577_SAFEOUT,

		.ops		= &max14577_safeout_ops,

		.type		= REGULATOR_VOLTAGE,

		.owner		= THIS_MODULE,

		.n_voltages	= 1,

		.min_uV		= MAX14577_REGULATOR_SAFEOUT_VOLTAGE,

		.enable_reg	= MAX14577_REG_CONTROL2,

		.enable_mask	= CTRL2_SFOUTORD_MASK,

	},

	[MAX14577_CHARGER] = {

		.name		= "CHARGER",

		.id		= MAX14577_CHARGER,

		.ops		= &max14577_charger_ops,

		.type		= REGULATOR_CURRENT,

		.owner		= THIS_MODULE,

		.enable_reg	= MAX14577_CHG_REG_CHG_CTRL2,

		.enable_mask	= CHGCTRL2_MBCHOSTEN_MASK,

	},

};



static struct regulator_ops max77836_ldo_ops = {

	.is_enabled		= regulator_is_enabled_regmap,

	.enable			= regulator_enable_regmap,

	.disable		= regulator_disable_regmap,

	.list_voltage		= regulator_list_voltage_linear,

	.map_voltage		= regulator_map_voltage_linear,

	.get_voltage_sel	= regulator_get_voltage_sel_regmap,

	.set_voltage_sel	= regulator_set_voltage_sel_regmap,

	/* TODO: add .set_suspend_mode */

};



static const struct regulator_desc max77836_supported_regulators[] = {

	[MAX14577_SAFEOUT] = {

		.name		= "SAFEOUT",

		.id		= MAX14577_SAFEOUT,
@@ -139,6 +217,34 @@ static const struct regulator_desc supported_regulators[] = { 
		.enable_reg	= MAX14577_CHG_REG_CHG_CTRL2,

		.enable_mask	= CHGCTRL2_MBCHOSTEN_MASK,

	},

	[MAX77836_LDO1] = {

		.name		= "LDO1",

		.id		= MAX77836_LDO1,

		.ops		= &max77836_ldo_ops,

		.type		= REGULATOR_VOLTAGE,

		.owner		= THIS_MODULE,

		.n_voltages	= MAX77836_REGULATOR_LDO_VOLTAGE_STEPS_NUM,

		.min_uV		= MAX77836_REGULATOR_LDO_VOLTAGE_MIN,

		.uV_step	= MAX77836_REGULATOR_LDO_VOLTAGE_STEP,

		.enable_reg	= MAX77836_LDO_REG_CNFG1_LDO1,

		.enable_mask	= MAX77836_CNFG1_LDO_PWRMD_MASK,

		.vsel_reg	= MAX77836_LDO_REG_CNFG1_LDO1,

		.vsel_mask	= MAX77836_CNFG1_LDO_TV_MASK,

	},

	[MAX77836_LDO2] = {

		.name		= "LDO2",

		.id		= MAX77836_LDO2,

		.ops		= &max77836_ldo_ops,

		.type		= REGULATOR_VOLTAGE,

		.owner		= THIS_MODULE,

		.n_voltages	= MAX77836_REGULATOR_LDO_VOLTAGE_STEPS_NUM,

		.min_uV		= MAX77836_REGULATOR_LDO_VOLTAGE_MIN,

		.uV_step	= MAX77836_REGULATOR_LDO_VOLTAGE_STEP,

		.enable_reg	= MAX77836_LDO_REG_CNFG1_LDO2,

		.enable_mask	= MAX77836_CNFG1_LDO_PWRMD_MASK,

		.vsel_reg	= MAX77836_LDO_REG_CNFG1_LDO2,

		.vsel_mask	= MAX77836_CNFG1_LDO_TV_MASK,

	},

};



#ifdef CONFIG_OF
@@ -147,10 +253,20 @@ static struct of_regulator_match max14577_regulator_matches[] = { 
	{ .name = "CHARGER", },

};



static int max14577_regulator_dt_parse_pdata(struct platform_device *pdev)

static struct of_regulator_match max77836_regulator_matches[] = {

	{ .name	= "SAFEOUT", },

	{ .name = "CHARGER", },

	{ .name = "LDO1", },

	{ .name = "LDO2", },

};



static int max14577_regulator_dt_parse_pdata(struct platform_device *pdev,

		enum maxim_device_type dev_type)

{

	int ret;

	struct device_node *np;

	struct of_regulator_match *regulator_matches;

	unsigned int regulator_matches_size;



	np = of_get_child_by_name(pdev->dev.parent->of_node, "regulators");

	if (!np) {
@@ -158,8 +274,19 @@ static int max14577_regulator_dt_parse_pdata(struct platform_device *pdev) 
		return -EINVAL;

	}



	ret = of_regulator_match(&pdev->dev, np, max14577_regulator_matches,

			MAX14577_REG_MAX);

	switch (dev_type) {

	case MAXIM_DEVICE_TYPE_MAX77836:

		regulator_matches = max77836_regulator_matches;

		regulator_matches_size = ARRAY_SIZE(max77836_regulator_matches);

		break;

	case MAXIM_DEVICE_TYPE_MAX14577:

	default:

		regulator_matches = max14577_regulator_matches;

		regulator_matches_size = ARRAY_SIZE(max14577_regulator_matches);

	}



	ret = of_regulator_match(&pdev->dev, np, regulator_matches,

			regulator_matches_size);

	if (ret < 0)

		dev_err(&pdev->dev, "Error parsing regulator init data: %d\n", ret);

	else
@@ -170,31 +297,74 @@ static int max14577_regulator_dt_parse_pdata(struct platform_device *pdev) 
	return ret;

}



static inline struct regulator_init_data *match_init_data(int index)

static inline struct regulator_init_data *match_init_data(int index,

		enum maxim_device_type dev_type)

{

	switch (dev_type) {

	case MAXIM_DEVICE_TYPE_MAX77836:

		return max77836_regulator_matches[index].init_data;



	case MAXIM_DEVICE_TYPE_MAX14577:

	default:

		return max14577_regulator_matches[index].init_data;

	}

}



static inline struct device_node *match_of_node(int index)

static inline struct device_node *match_of_node(int index,

		enum maxim_device_type dev_type)

{

	switch (dev_type) {

	case MAXIM_DEVICE_TYPE_MAX77836:

		return max77836_regulator_matches[index].of_node;



	case MAXIM_DEVICE_TYPE_MAX14577:

	default:

		return max14577_regulator_matches[index].of_node;

	}

}

#else /* CONFIG_OF */

static int max14577_regulator_dt_parse_pdata(struct platform_device *pdev)

static int max14577_regulator_dt_parse_pdata(struct platform_device *pdev,

		enum maxim_device_type dev_type)

{

	return 0;

}

static inline struct regulator_init_data *match_init_data(int index)

static inline struct regulator_init_data *match_init_data(int index,

		enum maxim_device_type dev_type)

{

	return NULL;

}



static inline struct device_node *match_of_node(int index)

static inline struct device_node *match_of_node(int index,

		enum maxim_device_type dev_type)

{

	return NULL;

}

#endif /* CONFIG_OF */



/**

 * Registers for regulators of max77836 use different I2C slave addresses so

 * different regmaps must be used for them.

 *

 * Returns proper regmap for accessing regulator passed by id.

 */

static struct regmap *max14577_get_regmap(struct max14577 *max14577,

		int reg_id)

{

	switch (max14577->dev_type) {

	case MAXIM_DEVICE_TYPE_MAX77836:

		switch (reg_id) {

		case MAX77836_SAFEOUT ... MAX77836_CHARGER:

			return max14577->regmap;

		default:

			/* MAX77836_LDO1 ... MAX77836_LDO2 */

			return max14577->regmap_pmic;

		}



	case MAXIM_DEVICE_TYPE_MAX14577:

	default:

		return max14577->regmap;

	}

}



static int max14577_regulator_probe(struct platform_device *pdev)

{
@@ -202,15 +372,29 @@ static int max14577_regulator_probe(struct platform_device *pdev) 
	struct max14577_platform_data *pdata = dev_get_platdata(max14577->dev);

	int i, ret;

	struct regulator_config config = {};

	const struct regulator_desc *supported_regulators;

	unsigned int supported_regulators_size;

	enum maxim_device_type dev_type = max14577->dev_type;



	ret = max14577_regulator_dt_parse_pdata(pdev);

	ret = max14577_regulator_dt_parse_pdata(pdev, dev_type);

	if (ret)

		return ret;



	switch (dev_type) {

	case MAXIM_DEVICE_TYPE_MAX77836:

		supported_regulators = max77836_supported_regulators;

		supported_regulators_size = ARRAY_SIZE(max77836_supported_regulators);

		break;

	case MAXIM_DEVICE_TYPE_MAX14577:

	default:

		supported_regulators = max14577_supported_regulators;

		supported_regulators_size = ARRAY_SIZE(max14577_supported_regulators);

	}



	config.dev = &pdev->dev;

	config.regmap = max14577->regmap;

	config.driver_data = max14577;



	for (i = 0; i < ARRAY_SIZE(supported_regulators); i++) {

	for (i = 0; i < supported_regulators_size; i++) {

		struct regulator_dev *regulator;

		/*

		 * Index of supported_regulators[] is also the id and must
@@ -220,17 +404,19 @@ static int max14577_regulator_probe(struct platform_device *pdev) 
			config.init_data = pdata->regulators[i].initdata;

			config.of_node = pdata->regulators[i].of_node;

		} else {

			config.init_data = match_init_data(i);

			config.of_node = match_of_node(i);

			config.init_data = match_init_data(i, dev_type);

			config.of_node = match_of_node(i, dev_type);

		}

		config.regmap = max14577_get_regmap(max14577,

				supported_regulators[i].id);



		regulator = devm_regulator_register(&pdev->dev,

				&supported_regulators[i], &config);

		if (IS_ERR(regulator)) {

			ret = PTR_ERR(regulator);

			dev_err(&pdev->dev,

					"Regulator init failed for ID %d with error: %d\n",

					i, ret);

					"Regulator init failed for %d/%s with error: %d\n",

					i, supported_regulators[i].name, ret);

			return ret;

		}

	}
@@ -238,20 +424,41 @@ static int max14577_regulator_probe(struct platform_device *pdev) 
	return ret;

}



static const struct platform_device_id max14577_regulator_id[] = {

	{ "max14577-regulator", MAXIM_DEVICE_TYPE_MAX14577, },

	{ "max77836-regulator", MAXIM_DEVICE_TYPE_MAX77836, },

	{ }

};

MODULE_DEVICE_TABLE(platform, max14577_regulator_id);



static struct platform_driver max14577_regulator_driver = {

	.driver = {

		   .owner = THIS_MODULE,

		   .name = "max14577-regulator",

		   },

	.probe		= max14577_regulator_probe,

	.id_table	= max14577_regulator_id,

};



static int __init max14577_regulator_init(void)

{

	/* Check for valid values for charger */

	BUILD_BUG_ON(MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_START +

			MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_STEP * 0xf !=

			MAX14577_REGULATOR_CURRENT_LIMIT_MAX);

	BUILD_BUG_ON(ARRAY_SIZE(supported_regulators) != MAX14577_REG_MAX);

	BUILD_BUG_ON(MAX77836_REGULATOR_CURRENT_LIMIT_HIGH_START +

			MAX77836_REGULATOR_CURRENT_LIMIT_HIGH_STEP * 0xf !=

			MAX77836_REGULATOR_CURRENT_LIMIT_MAX);

	/* Valid charger current values must be provided for each chipset */

	BUILD_BUG_ON(ARRAY_SIZE(maxim_charger_currents) != MAXIM_DEVICE_TYPE_NUM);



	BUILD_BUG_ON(ARRAY_SIZE(max14577_supported_regulators) != MAX14577_REGULATOR_NUM);

	BUILD_BUG_ON(ARRAY_SIZE(max77836_supported_regulators) != MAX77836_REGULATOR_NUM);



	BUILD_BUG_ON(MAX77836_REGULATOR_LDO_VOLTAGE_MIN +

			(MAX77836_REGULATOR_LDO_VOLTAGE_STEP *

			  (MAX77836_REGULATOR_LDO_VOLTAGE_STEPS_NUM - 1)) !=

			MAX77836_REGULATOR_LDO_VOLTAGE_MAX);



	return platform_driver_register(&max14577_regulator_driver);

}
@@ -264,6 +471,6 @@ static void __exit max14577_regulator_exit(void) 
module_exit(max14577_regulator_exit);



MODULE_AUTHOR("Krzysztof Kozlowski <k.kozlowski@samsung.com>");

MODULE_DESCRIPTION("MAXIM 14577 regulator driver");

MODULE_DESCRIPTION("Maxim 14577/77836 regulator driver");

MODULE_LICENSE("GPL");

MODULE_ALIAS("platform:max14577-regulator");

include/linux/mfd/max14577-private.h

+32 −0
Original line number Diff line number Diff line
@@ -261,9 +261,21 @@ enum max14577_charger_reg { 
#define MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_STEP	 50000

#define MAX14577_REGULATOR_CURRENT_LIMIT_MAX		950000



/* MAX77836 regulator current limits (as in CHGCTRL4 register), uA */

#define MAX77836_REGULATOR_CURRENT_LIMIT_MIN		 45000

#define MAX77836_REGULATOR_CURRENT_LIMIT_HIGH_START	100000

#define MAX77836_REGULATOR_CURRENT_LIMIT_HIGH_STEP	 25000

#define MAX77836_REGULATOR_CURRENT_LIMIT_MAX		475000



/* MAX14577 regulator SFOUT LDO voltage, fixed, uV */

#define MAX14577_REGULATOR_SAFEOUT_VOLTAGE		4900000



/* MAX77836 regulator LDOx voltage, uV */

#define MAX77836_REGULATOR_LDO_VOLTAGE_MIN		800000

#define MAX77836_REGULATOR_LDO_VOLTAGE_MAX		3950000

#define MAX77836_REGULATOR_LDO_VOLTAGE_STEP		50000

#define MAX77836_REGULATOR_LDO_VOLTAGE_STEPS_NUM	64



/* Slave addr = 0x46: PMIC */

enum max77836_pmic_reg {

	MAX77836_PMIC_REG_PMIC_ID		= 0x20,
@@ -298,6 +310,26 @@ enum max77836_pmic_reg { 
#define MAX77836_TOPSYS_INT_T120C_MASK		BIT(MAX77836_TOPSYS_INT_T120C_SHIFT)

#define MAX77836_TOPSYS_INT_T140C_MASK		BIT(MAX77836_TOPSYS_INT_T140C_SHIFT)



/* LDO1/LDO2 CONFIG1 register */

#define MAX77836_CNFG1_LDO_PWRMD_SHIFT		6

#define MAX77836_CNFG1_LDO_TV_SHIFT		0

#define MAX77836_CNFG1_LDO_PWRMD_MASK		(0x3 << MAX77836_CNFG1_LDO_PWRMD_SHIFT)

#define MAX77836_CNFG1_LDO_TV_MASK		(0x3f << MAX77836_CNFG1_LDO_TV_SHIFT)



/* LDO1/LDO2 CONFIG2 register */

#define MAX77836_CNFG2_LDO_OVCLMPEN_SHIFT	7

#define MAX77836_CNFG2_LDO_ALPMEN_SHIFT		6

#define MAX77836_CNFG2_LDO_COMP_SHIFT		4

#define MAX77836_CNFG2_LDO_POK_SHIFT		3

#define MAX77836_CNFG2_LDO_ADE_SHIFT		1

#define MAX77836_CNFG2_LDO_SS_SHIFT		0

#define MAX77836_CNFG2_LDO_OVCLMPEN_MASK	BIT(MAX77836_CNFG2_LDO_OVCLMPEN_SHIFT)

#define MAX77836_CNFG2_LDO_ALPMEN_MASK		BIT(MAX77836_CNFG2_LDO_ALPMEN_SHIFT)

#define MAX77836_CNFG2_LDO_COMP_MASK		(0x3 << MAX77836_CNFG2_LDO_COMP_SHIFT)

#define MAX77836_CNFG2_LDO_POK_MASK		BIT(MAX77836_CNFG2_LDO_POK_SHIFT)

#define MAX77836_CNFG2_LDO_ADE_MASK		BIT(MAX77836_CNFG2_LDO_ADE_SHIFT)

#define MAX77836_CNFG2_LDO_SS_MASK		BIT(MAX77836_CNFG2_LDO_SS_SHIFT)



/* Slave addr = 0x6C: Fuel-Gauge/Battery */

enum max77836_fg_reg {

	MAX77836_FG_REG_VCELL_MSB	= 0x02,

include/linux/mfd/max14577.h

+11 −1
Original line number Diff line number Diff line
@@ -35,7 +35,17 @@ enum max14577_regulators { 
	MAX14577_SAFEOUT = 0,

	MAX14577_CHARGER,



	MAX14577_REG_MAX,

	MAX14577_REGULATOR_NUM,

};



/* MAX77836 regulator IDs */

enum max77836_regulators {

	MAX77836_SAFEOUT = 0,

	MAX77836_CHARGER,

	MAX77836_LDO1,

	MAX77836_LDO2,



	MAX77836_REGULATOR_NUM,

};



struct max14577_regulator_platform_data {

CRA Git | Maintained and supported by SUSTech CRA and CCSE