Commit 8a6f7e14 authored by Grazvydas Ignotas's avatar Grazvydas Ignotas Committed by Tony Lindgren
Browse files

omap: mux: fix multipath gpio handling 



OMAP3530 CBB package can have GPIO126 muxed on 2 pins: mmc1_dat4 and
cam_strobe. This causes a problem with current multipath GPIO mux
handling, which muxes both pins as GPIO126 and makes the GPIO unusable.

Fix this by not muxing any pins if multipath GPIO is detected and
just print a warning instead. It's up to board files to set correct
mux using omap_mux_init_signal and pin name.

Signed-off-by: default avatarGrazvydas Ignotas <notasas@gmail.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 7d35b8d0

arch/arm/mach-omap2/mux.c

+20 −18
Original line number Diff line number Diff line
@@ -87,6 +87,9 @@ static char *omap_mux_options; 
int __init omap_mux_init_gpio(int gpio, int val)

{

	struct omap_mux_entry *e;

	struct omap_mux *gpio_mux;

	u16 old_mode;

	u16 mux_mode;

	int found = 0;



	if (!gpio)
@@ -95,34 +98,33 @@ int __init omap_mux_init_gpio(int gpio, int val) 
	list_for_each_entry(e, &muxmodes, node) {

		struct omap_mux *m = &e->mux;

		if (gpio == m->gpio) {

			u16 old_mode;

			u16 mux_mode;



			old_mode = omap_mux_read(m->reg_offset);

			mux_mode = val & ~(OMAP_MUX_NR_MODES - 1);

			if (omap_mux_flags & MUXABLE_GPIO_MODE3)

				mux_mode |= OMAP_MUX_MODE3;

			else

				mux_mode |= OMAP_MUX_MODE4;

			printk(KERN_DEBUG "mux: Setting signal "

				"%s.gpio%i 0x%04x -> 0x%04x\n",

				m->muxnames[0], gpio, old_mode, mux_mode);

			omap_mux_write(mux_mode, m->reg_offset);

			gpio_mux = m;

			found++;

		}

	}



	if (found == 1)

		return 0;

	if (found == 0) {

		printk(KERN_ERR "mux: Could not set gpio%i\n", gpio);

		return -ENODEV;

	}



	if (found > 1) {

		printk(KERN_ERR "mux: Multiple gpio paths for gpio%i\n", gpio);

		printk(KERN_INFO "mux: Multiple gpio paths (%d) for gpio%i\n",

				found, gpio);

		return -EINVAL;

	}



	printk(KERN_ERR "mux: Could not set gpio%i\n", gpio);

	old_mode = omap_mux_read(gpio_mux->reg_offset);

	mux_mode = val & ~(OMAP_MUX_NR_MODES - 1);

	if (omap_mux_flags & MUXABLE_GPIO_MODE3)

		mux_mode |= OMAP_MUX_MODE3;

	else

		mux_mode |= OMAP_MUX_MODE4;

	printk(KERN_DEBUG "mux: Setting signal %s.gpio%i 0x%04x -> 0x%04x\n",

			gpio_mux->muxnames[0], gpio, old_mode, mux_mode);

	omap_mux_write(mux_mode, gpio_mux->reg_offset);



	return -ENODEV;

	return 0;

}



int __init omap_mux_init_signal(char *muxname, int val)

CRA Git | Maintained and supported by SUSTech CRA and CCSE