Commit 88578468 authored by David S. Miller's avatar David S. Miller
Browse files

Merge branch 'mdix_ctrl' 



Raju Lakkaraju says:

====================
Adding PHY MDI(X) support

I updated all review comments which were given by Andrew and Florian.

This series add support for PHY MDI(X), and implement it for MSCC phys.

Tested on Beaglebone Black with VSC 8531 PHY.

Change set:
v1:
- Initial patch submit the WoL and MDI-X in single set of patches

v2:
- Split the mdi(x) as signal set of patches.
- Remove the out_unlock as suggested by Andrew.
- Add mdix_ctrl parameter in "phy_device" to handle the user configure
  mdi(x). Proposed implementation accepted by Florian.
- phydev->mdix_ctrl initialize with ETH_TP_MDI_AUTO. Ethernet controller
  never initialize this parameter.
- Fix the mdix changes in marvell and microchip driver.
====================

Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 8f679ed8 4e26c5c3

drivers/net/phy/marvell.c

+2 −2
Original line number Diff line number Diff line
@@ -268,7 +268,7 @@ static int marvell_config_aneg(struct phy_device *phydev) 
	if (err < 0)

		return err;



	err = marvell_set_polarity(phydev, phydev->mdix);

	err = marvell_set_polarity(phydev, phydev->mdix_ctrl);

	if (err < 0)

		return err;
@@ -311,7 +311,7 @@ static int m88e1111_config_aneg(struct phy_device *phydev) 
	 */

	err = phy_write(phydev, MII_BMCR, BMCR_RESET);



	err = marvell_set_polarity(phydev, phydev->mdix);

	err = marvell_set_polarity(phydev, phydev->mdix_ctrl);

	if (err < 0)

		return err;

drivers/net/phy/microchip.c

+1 −1
Original line number Diff line number Diff line
@@ -111,7 +111,7 @@ static void lan88xx_set_mdix(struct phy_device *phydev) 
	int buf;

	int val;



	switch (phydev->mdix) {

	switch (phydev->mdix_ctrl) {

	case ETH_TP_MDI:

		val = LAN88XX_EXT_MODE_CTRL_MDI_;

		break;

drivers/net/phy/mscc.c

+97 −8
Original line number Diff line number Diff line
@@ -27,6 +27,11 @@ enum rgmii_rx_clock_delay { 


/* Microsemi VSC85xx PHY registers */

/* IEEE 802. Std Registers */

#define MSCC_PHY_BYPASS_CONTROL		  18

#define DISABLE_HP_AUTO_MDIX_MASK	  0x0080

#define DISABLE_PAIR_SWAP_CORR_MASK	  0x0020

#define DISABLE_POLARITY_CORR_MASK	  0x0010



#define MSCC_PHY_EXT_PHY_CNTL_1           23

#define MAC_IF_SELECTION_MASK             0x1800

#define MAC_IF_SELECTION_GMII             0
@@ -44,12 +49,20 @@ enum rgmii_rx_clock_delay { 
#define EDGE_RATE_CNTL_POS                5

#define EDGE_RATE_CNTL_MASK               0x00E0



#define MSCC_PHY_DEV_AUX_CNTL		  28

#define HP_AUTO_MDIX_X_OVER_IND_MASK	  0x2000



#define MSCC_EXT_PAGE_ACCESS		  31

#define MSCC_PHY_PAGE_STANDARD		  0x0000 /* Standard registers */

#define MSCC_PHY_PAGE_EXTENDED		  0x0001 /* Extended registers */

#define MSCC_PHY_PAGE_EXTENDED_2	  0x0002 /* Extended reg - page 2 */



/* Extended Page 1 Registers */

#define MSCC_PHY_EXT_MODE_CNTL		  19

#define FORCE_MDI_CROSSOVER_MASK	  0x000C

#define FORCE_MDI_CROSSOVER_MDIX	  0x000C

#define FORCE_MDI_CROSSOVER_MDI		  0x0008



#define MSCC_PHY_ACTIPHY_CNTL		  20

#define DOWNSHIFT_CNTL_MASK		  0x001C

#define DOWNSHIFT_EN			  0x0010
@@ -110,6 +123,59 @@ static int vsc85xx_phy_page_set(struct phy_device *phydev, u8 page) 
	return rc;

}



static int vsc85xx_mdix_get(struct phy_device *phydev, u8 *mdix)

{

	u16 reg_val;



	reg_val = phy_read(phydev, MSCC_PHY_DEV_AUX_CNTL);

	if (reg_val & HP_AUTO_MDIX_X_OVER_IND_MASK)

		*mdix = ETH_TP_MDI_X;

	else

		*mdix = ETH_TP_MDI;



	return 0;

}



static int vsc85xx_mdix_set(struct phy_device *phydev, u8 mdix)

{

	int rc;

	u16 reg_val;



	reg_val = phy_read(phydev, MSCC_PHY_BYPASS_CONTROL);

	if ((mdix == ETH_TP_MDI) || (mdix == ETH_TP_MDI_X)) {

		reg_val |= (DISABLE_PAIR_SWAP_CORR_MASK |

			    DISABLE_POLARITY_CORR_MASK  |

			    DISABLE_HP_AUTO_MDIX_MASK);

	} else {

		reg_val &= ~(DISABLE_PAIR_SWAP_CORR_MASK |

			     DISABLE_POLARITY_CORR_MASK  |

			     DISABLE_HP_AUTO_MDIX_MASK);

	}

	rc = phy_write(phydev, MSCC_PHY_BYPASS_CONTROL, reg_val);

	if (rc != 0)

		return rc;



	rc = vsc85xx_phy_page_set(phydev, MSCC_PHY_PAGE_EXTENDED);

	if (rc != 0)

		return rc;



	reg_val = phy_read(phydev, MSCC_PHY_EXT_MODE_CNTL);

	reg_val &= ~(FORCE_MDI_CROSSOVER_MASK);

	if (mdix == ETH_TP_MDI)

		reg_val |= FORCE_MDI_CROSSOVER_MDI;

	else if (mdix == ETH_TP_MDI_X)

		reg_val |= FORCE_MDI_CROSSOVER_MDIX;

	rc = phy_write(phydev, MSCC_PHY_EXT_MODE_CNTL, reg_val);

	if (rc != 0)

		return rc;



	rc = vsc85xx_phy_page_set(phydev, MSCC_PHY_PAGE_STANDARD);

	if (rc != 0)

		return rc;



	return genphy_restart_aneg(phydev);

}



static int vsc85xx_downshift_get(struct phy_device *phydev, u8 *count)

{

	int rc;
@@ -375,6 +441,7 @@ static int vsc85xx_default_config(struct phy_device *phydev) 
	int rc;

	u16 reg_val;



	phydev->mdix_ctrl = ETH_TP_MDI_AUTO;

	mutex_lock(&phydev->lock);

	rc = vsc85xx_phy_page_set(phydev, MSCC_PHY_PAGE_EXTENDED_2);

	if (rc != 0)
@@ -464,6 +531,28 @@ static int vsc85xx_config_intr(struct phy_device *phydev) 
	return rc;

}



static int vsc85xx_config_aneg(struct phy_device *phydev)

{

	int rc;



	rc = vsc85xx_mdix_set(phydev, phydev->mdix_ctrl);

	if (rc < 0)

		return rc;



	return genphy_config_aneg(phydev);

}



static int vsc85xx_read_status(struct phy_device *phydev)

{

	int rc;



	rc = vsc85xx_mdix_get(phydev, &phydev->mdix);

	if (rc < 0)

		return rc;



	return genphy_read_status(phydev);

}



static int vsc85xx_probe(struct phy_device *phydev)

{

	int rate_magic;
@@ -494,9 +583,9 @@ static struct phy_driver vsc85xx_driver[] = { 
	.flags		= PHY_HAS_INTERRUPT,

	.soft_reset	= &genphy_soft_reset,

	.config_init	= &vsc85xx_config_init,

	.config_aneg	= &genphy_config_aneg,

	.config_aneg    = &vsc85xx_config_aneg,

	.aneg_done	= &genphy_aneg_done,

	.read_status	= &genphy_read_status,

	.read_status	= &vsc85xx_read_status,

	.ack_interrupt	= &vsc85xx_ack_interrupt,

	.config_intr	= &vsc85xx_config_intr,

	.suspend	= &genphy_suspend,
@@ -515,9 +604,9 @@ static struct phy_driver vsc85xx_driver[] = { 
	.flags		= PHY_HAS_INTERRUPT,

	.soft_reset	= &genphy_soft_reset,

	.config_init    = &vsc85xx_config_init,

	.config_aneg    = &genphy_config_aneg,

	.config_aneg    = &vsc85xx_config_aneg,

	.aneg_done	= &genphy_aneg_done,

	.read_status    = &genphy_read_status,

	.read_status	= &vsc85xx_read_status,

	.ack_interrupt  = &vsc85xx_ack_interrupt,

	.config_intr    = &vsc85xx_config_intr,

	.suspend	= &genphy_suspend,
@@ -536,9 +625,9 @@ static struct phy_driver vsc85xx_driver[] = { 
	.flags		= PHY_HAS_INTERRUPT,

	.soft_reset	= &genphy_soft_reset,

	.config_init	= &vsc85xx_config_init,

	.config_aneg	= &genphy_config_aneg,

	.config_aneg	= &vsc85xx_config_aneg,

	.aneg_done	= &genphy_aneg_done,

	.read_status	= &genphy_read_status,

	.read_status	= &vsc85xx_read_status,

	.ack_interrupt	= &vsc85xx_ack_interrupt,

	.config_intr	= &vsc85xx_config_intr,

	.suspend	= &genphy_suspend,
@@ -557,9 +646,9 @@ static struct phy_driver vsc85xx_driver[] = { 
	.flags		= PHY_HAS_INTERRUPT,

	.soft_reset	= &genphy_soft_reset,

	.config_init    = &vsc85xx_config_init,

	.config_aneg    = &genphy_config_aneg,

	.config_aneg    = &vsc85xx_config_aneg,

	.aneg_done	= &genphy_aneg_done,

	.read_status    = &genphy_read_status,

	.read_status	= &vsc85xx_read_status,

	.ack_interrupt  = &vsc85xx_ack_interrupt,

	.config_intr    = &vsc85xx_config_intr,

	.suspend	= &genphy_suspend,

drivers/net/phy/phy.c

+6 −4
Original line number Diff line number Diff line
@@ -389,7 +389,7 @@ int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd) 


	phydev->duplex = cmd->duplex;



	phydev->mdix = cmd->eth_tp_mdix_ctrl;

	phydev->mdix_ctrl = cmd->eth_tp_mdix_ctrl;



	/* Restart the PHY */

	phy_start_aneg(phydev);
@@ -443,7 +443,7 @@ int phy_ethtool_ksettings_set(struct phy_device *phydev, 


	phydev->duplex = duplex;



	phydev->mdix = cmd->base.eth_tp_mdix_ctrl;

	phydev->mdix_ctrl = cmd->base.eth_tp_mdix_ctrl;



	/* Restart the PHY */

	phy_start_aneg(phydev);
@@ -469,7 +469,8 @@ int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd) 
	cmd->transceiver = phy_is_internal(phydev) ?

		XCVR_INTERNAL : XCVR_EXTERNAL;

	cmd->autoneg = phydev->autoneg;

	cmd->eth_tp_mdix_ctrl = phydev->mdix;

	cmd->eth_tp_mdix_ctrl = phydev->mdix_ctrl;

	cmd->eth_tp_mdix = phydev->mdix;



	return 0;

}
@@ -496,7 +497,8 @@ int phy_ethtool_ksettings_get(struct phy_device *phydev, 


	cmd->base.phy_address = phydev->mdio.addr;

	cmd->base.autoneg = phydev->autoneg;

	cmd->base.eth_tp_mdix_ctrl = phydev->mdix;

	cmd->base.eth_tp_mdix_ctrl = phydev->mdix_ctrl;

	cmd->base.eth_tp_mdix = phydev->mdix;



	return 0;

}

include/linux/phy.h

+1 −0
Original line number Diff line number Diff line
@@ -450,6 +450,7 @@ struct phy_device { 
	struct net_device *attached_dev;



	u8 mdix;

	u8 mdix_ctrl;



	void (*adjust_link)(struct net_device *dev);

};

CRA Git | Maintained and supported by SUSTech CRA and CCSE