Commit 87fc94d5 authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge branch 'avr32-arch' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6 

* 'avr32-arch' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:
  avr32: add hardware handshake support to atmel_serial
  avr32: add RTS/CTS/CLK pin selection for the USARTs
  Add RTC support for Merisc boards
  avr32: at32ap700x: setup DMA for AC97C in the machine code
  avr32: at32ap700x: setup DMA for ABDAC in the machine code
  Add Merisc board support
  avr32: use gpio_is_valid() to check USBA vbus_pin I/O line
  atmel-usba-udc: use gpio_is_valid() to check vbus_pin I/O line
  avr32: fix timing LCD parameters for EVKLCD10X boards
  avr32: use GPIO line PB15 on EVKLCD10x boards for backlight
  avr32: configure MCI detect and write protect pins for EVKLCD10x boards
  avr32: set pin mask to alternative 18 bpp for EVKLCD10x boards
  avr32: add pin mask for 18-bit color on the LCD controller
  avr32: fix 15-bit LCDC pin mask to use MSB lines
parents 3516c6a8 8e706c4d

arch/avr32/Kconfig

+14 −0
Original line number Diff line number Diff line
@@ -144,6 +144,19 @@ config BOARD_FAVR_32 
	bool "Favr-32 LCD-board"

	select CPU_AT32AP7000



config BOARD_MERISC

	bool "Merisc board"

	select CPU_AT32AP7000

	help

	  Merisc is the family name for a range of AVR32-based boards.



	  The boards are designed to be used in a man-machine

	  interfacing environment, utilizing a touch-based graphical

	  user interface. They host a vast range of I/O peripherals as

	  well as a large SDRAM & Flash memory bank.



	  For more information see: http://www.martinsson.se/merisc



config BOARD_MIMC200

	bool "MIMC200 CPU board"

	select CPU_AT32AP7000
@@ -153,6 +166,7 @@ source "arch/avr32/boards/atstk1000/Kconfig" 
source "arch/avr32/boards/atngw100/Kconfig"

source "arch/avr32/boards/hammerhead/Kconfig"

source "arch/avr32/boards/favr-32/Kconfig"

source "arch/avr32/boards/merisc/Kconfig"



choice

	prompt "Boot loader type"

arch/avr32/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -35,6 +35,7 @@ core-$(CONFIG_BOARD_ATSTK1000) += arch/avr32/boards/atstk1000/ 
core-$(CONFIG_BOARD_ATNGW100)		+= arch/avr32/boards/atngw100/

core-$(CONFIG_BOARD_HAMMERHEAD)		+= arch/avr32/boards/hammerhead/

core-$(CONFIG_BOARD_FAVR_32)		+= arch/avr32/boards/favr-32/

core-$(CONFIG_BOARD_MERISC)		+= arch/avr32/boards/merisc/

core-$(CONFIG_BOARD_MIMC200)		+= arch/avr32/boards/mimc200/

core-$(CONFIG_LOADER_U_BOOT)		+= arch/avr32/boot/u-boot/

core-y					+= arch/avr32/kernel/

arch/avr32/boards/atngw100/evklcd10x.c

+34 −16
Original line number Diff line number Diff line
@@ -11,6 +11,7 @@ 


#include <linux/init.h>

#include <linux/linkage.h>

#include <linux/gpio.h>

#include <linux/fb.h>

#include <linux/platform_device.h>
@@ -19,26 +20,26 @@ 
#include <asm/setup.h>



#include <mach/at32ap700x.h>

#include <mach/portmux.h>

#include <mach/board.h>



#include <sound/atmel-ac97c.h>



static struct ac97c_platform_data __initdata ac97c0_data = {

	.dma_rx_periph_id	= 3,

	.dma_tx_periph_id	= 4,

	.dma_controller_id	= 0,

	.reset_pin = GPIO_PIN_PB(19),

};



#ifdef CONFIG_BOARD_ATNGW100_EVKLCD10X_VGA

static struct fb_videomode __initdata tcg057vglad_modes[] = {

	{

		.name		= "640x480 @ 60",

		.refresh	= 60,

		.name		= "640x480 @ 50",

		.refresh	= 50,

		.xres		= 640,		.yres		= 480,

		.pixclock	= KHZ2PICOS(25180),



		.left_margin	= 64,		.right_margin	= 31,

		.upper_margin	= 34,		.lower_margin	= 2,

		.hsync_len	= 96,		.vsync_len	= 4,

		.left_margin	= 64,		.right_margin	= 96,

		.upper_margin	= 34,		.lower_margin	= 11,

		.hsync_len	= 64,		.vsync_len	= 15,



		.sync		= 0,

		.vmode		= FB_VMODE_NONINTERLACED,
@@ -69,14 +70,14 @@ static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = { 
#elif CONFIG_BOARD_ATNGW100_EVKLCD10X_QVGA

static struct fb_videomode __initdata tcg057qvlad_modes[] = {

	{

		.name		= "320x240 @ 60",

		.refresh	= 60,

		.name		= "320x240 @ 50",

		.refresh	= 50,

		.xres		= 320,		.yres		= 240,

		.pixclock	= KHZ2PICOS(6300),



		.left_margin	= 52,		.right_margin	= 28,

		.upper_margin	= 7,		.lower_margin	= 2,

		.hsync_len	= 96,		.vsync_len	= 4,

		.left_margin	= 34,		.right_margin	= 46,

		.upper_margin	= 7,		.lower_margin	= 15,

		.hsync_len	= 64,		.vsync_len	= 12,



		.sync		= 0,

		.vmode		= FB_VMODE_NONINTERLACED,
@@ -144,12 +145,29 @@ static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = { 
};

#endif



static void atevklcd10x_lcdc_power_control(int on)

{

	gpio_set_value(GPIO_PIN_PB(15), on);

}



static int __init atevklcd10x_init(void)

{

	at32_add_device_ac97c(0, &ac97c0_data);

	/* PB15 is connected to the enable line on the boost regulator

	 * controlling the backlight for the LCD panel.

	 */

	at32_select_gpio(GPIO_PIN_PB(15), AT32_GPIOF_OUTPUT);

	gpio_request(GPIO_PIN_PB(15), "backlight");

	gpio_direction_output(GPIO_PIN_PB(15), 0);



	atevklcd10x_lcdc_data.atmel_lcdfb_power_control =

		atevklcd10x_lcdc_power_control;



	at32_add_device_lcdc(0, &atevklcd10x_lcdc_data,

			fbmem_start, fbmem_size, 1);

			fbmem_start, fbmem_size,

			ATMEL_LCDC_ALT_18BIT | ATMEL_LCDC_PE_DVAL);



	at32_add_device_ac97c(0, &ac97c0_data, AC97C_BOTH);



	return 0;

}

postcore_initcall(atevklcd10x_init);

arch/avr32/boards/atngw100/setup.c

+1 −6
Original line number Diff line number Diff line
@@ -56,13 +56,8 @@ static struct spi_board_info spi0_board_info[] __initdata = { 
static struct mci_platform_data __initdata mci0_data = {

	.slot[0] = {

		.bus_width	= 4,

#ifndef CONFIG_BOARD_ATNGW100_EVKLCD10X

		.detect_pin	= GPIO_PIN_PC(25),

		.wp_pin		= GPIO_PIN_PE(0),

#else

		.detect_pin	= GPIO_PIN_NONE,

		.wp_pin		= GPIO_PIN_NONE,

#endif

	},

};
@@ -123,7 +118,7 @@ static void __init set_hw_addr(struct platform_device *pdev) 


void __init setup_board(void)

{

	at32_map_usart(1, 0);	/* USART 1: /dev/ttyS0, DB9 */

	at32_map_usart(1, 0, 0);	/* USART 1: /dev/ttyS0, DB9 */

	at32_setup_serial_console(0);

}

arch/avr32/boards/atstk1000/atstk1002.c

+3 −3
Original line number Diff line number Diff line
@@ -252,12 +252,12 @@ static void __init atstk1002_setup_extdac(void) 
void __init setup_board(void)

{

#ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM

	at32_map_usart(0, 1);	/* USART 0/B: /dev/ttyS1, IRDA */

	at32_map_usart(0, 1, 0);	/* USART 0/B: /dev/ttyS1, IRDA */

#else

	at32_map_usart(1, 0);	/* USART 1/A: /dev/ttyS0, DB9 */

	at32_map_usart(1, 0, 0);	/* USART 1/A: /dev/ttyS0, DB9 */

#endif

	/* USART 2/unused: expansion connector */

	at32_map_usart(3, 2);	/* USART 3/C: /dev/ttyS2, DB9 */

	at32_map_usart(3, 2, 0);	/* USART 3/C: /dev/ttyS2, DB9 */



	at32_setup_serial_console(0);

}

CRA Git | Maintained and supported by SUSTech CRA and CCSE