Commit 877db62e authored by Yann Gautier's avatar Yann Gautier Committed by Alexandre Torgue
Browse files

ARM: dts: stm32: add cd-gpios properties for SD-cards on STM32MP1 boards 



The broken-cd properties are replaced with cd-gpios, with the correct
GPIO to detect the card insertion. The GPIO lines require a pull-up.

Signed-off-by: default avatarYann Gautier <yann.gautier@st.com>
Signed-off-by: default avatarAlexandre Torgue <alexandre.torgue@st.com>
parent 7519e95b

arch/arm/boot/dts/stm32mp157a-avenger96.dts

+1 −1
Original line number Diff line number Diff line
@@ -292,7 +292,7 @@ 
	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;

	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;

	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;

	broken-cd;

	cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;

	st,sig-dir;

	st,neg-edge;

	st,use-ckin;

arch/arm/boot/dts/stm32mp157c-ed1.dts

+1 −1
Original line number Diff line number Diff line
@@ -312,7 +312,7 @@ 
	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;

	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>;

	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>;

	broken-cd;

	cd-gpios = <&gpiog 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;

	st,sig-dir;

	st,neg-edge;

	st,use-ckin;

arch/arm/boot/dts/stm32mp15xx-dkx.dtsi

+1 −1
Original line number Diff line number Diff line
@@ -478,7 +478,7 @@ 
	pinctrl-0 = <&sdmmc1_b4_pins_a>;

	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;

	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;

	broken-cd;

	cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;

	st,neg-edge;

	bus-width = <4>;

	vmmc-supply = <&v3v3>;

CRA Git | Maintained and supported by SUSTech CRA and CCSE