Commit 84f57fbc authored by Narendra Sankar's avatar Narendra Sankar Committed by Bartlomiej Zolnierkiewicz
Browse files

[PATCH] serverworks: add support for new southbridge IDE 



BCM5785 (HT1000) is a Opteron Southbridge from Serverworks/Broadcom that
incorporates a single channel ATA100 IDE controller that is functionally
identical to the Serverworks CSB6 IDE controller.  This patch adds support
for the new PCI device ID and also the support for this controller.

Signed-off-by: default avatarNarendra Sankar <nsankar@broadcom.com>
Acked-by: default avatarJeff Garzik <jgarzik@pobox.com>
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
parent 2f09a7f4

drivers/ide/pci/serverworks.c

+23 −0
Original line number Diff line number Diff line
@@ -21,6 +21,9 @@ 
 *

 *   CSB6: `Champion South Bridge' IDE Interface (optional: third channel)

 *

 *   HT1000: AKA BCM5785 - Hypertransport Southbridge for Opteron systems. IDE

 *   controller same as the CSB6. Single channel ATA100 only.

 *

 * Documentation:

 *	Available under NDA only. Errata info very hard to get.

 *
@@ -71,6 +74,8 @@ static u8 svwks_ratemask (ide_drive_t *drive) 
	if (!svwks_revision)

		pci_read_config_byte(dev, PCI_REVISION_ID, &svwks_revision);



	if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE)

		return 2;

	if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {

		u32 reg = 0;

		if (isa_dev)
@@ -109,6 +114,7 @@ static u8 svwks_csb_check (struct pci_dev *dev) 
		case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:

		case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE:

		case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2:

		case PCI_DEVICE_ID_SERVERWORKS_HT1000IDE:

			return 1;

		default:

			break;
@@ -438,6 +444,13 @@ static unsigned int __devinit init_chipset_svwks (struct pci_dev *dev, const cha 
			btr |= (svwks_revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2;

		pci_write_config_byte(dev, 0x5A, btr);

	}

	/* Setup HT1000 SouthBridge Controller - Single Channel Only */

	else if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) {

		pci_read_config_byte(dev, 0x5A, &btr);

		btr &= ~0x40;

		btr |= 0x3;

		pci_write_config_byte(dev, 0x5A, btr);

	}



	return (dev->irq) ? dev->irq : 0;

}
@@ -629,6 +642,15 @@ static ide_pci_device_t serverworks_chipsets[] __devinitdata = { 
		.channels	= 1,	/* 2 */

		.autodma	= AUTODMA,

		.bootable	= ON_BOARD,

	},{	/* 4 */

		.name		= "SvrWks HT1000",

		.init_setup	= init_setup_svwks,

		.init_chipset	= init_chipset_svwks,

		.init_hwif	= init_hwif_svwks,

		.init_dma	= init_dma_svwks,

		.channels	= 1,	/* 2 */

		.autodma	= AUTODMA,

		.bootable	= ON_BOARD,

	}

};
@@ -653,6 +675,7 @@ static struct pci_device_id svwks_pci_tbl[] = { 
	{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},

	{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},

	{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3},

	{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4},

	{ 0, },

};

MODULE_DEVICE_TABLE(pci, svwks_pci_tbl);

include/linux/pci_ids.h

+1 −0
Original line number Diff line number Diff line
@@ -1580,6 +1580,7 @@ 
#define PCI_DEVICE_ID_SERVERWORKS_OSB4IDE 0x0211

#define PCI_DEVICE_ID_SERVERWORKS_CSB5IDE 0x0212

#define PCI_DEVICE_ID_SERVERWORKS_CSB6IDE 0x0213

#define PCI_DEVICE_ID_SERVERWORKS_HT1000IDE 0x0214

#define PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2 0x0217

#define PCI_DEVICE_ID_SERVERWORKS_OSB4USB 0x0220

#define PCI_DEVICE_ID_SERVERWORKS_CSB5USB PCI_DEVICE_ID_SERVERWORKS_OSB4USB

CRA Git | Maintained and supported by SUSTech CRA and CCSE