Commit 84edbeea authored by Arun Murthy's avatar Arun Murthy Committed by Anton Vorontsov
Browse files

ab8500-charger: AB8500 charger driver 



This driver is responsible for detecting the ac/usb plugin and also includes
function to enable ac/usb charging and re-kick the watchdog.
It registers with the power supply class and provides information to the user
space. The information include status of ac/usb charger device.
This information in turn will be used by the abx500 charging algorithm driver
to enable/disable and monitor charging.

Signed-off-by: default avatarArun Murthy <arun.murthy@stericsson.com>
Acked-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarAnton Vorontsov <anton.vorontsov@linaro.org>
parent 1668f811

drivers/power/ab8500_charger.c

0 → 100644
+2789 −0

File added.

Preview size limit exceeded, changes collapsed.

include/linux/mfd/abx500/ab8500-bm.h

0 → 100644
+554 −0
Original line number Diff line number Diff line 
/*

 * Copyright ST-Ericsson 2012.

 *

 * Author: Arun Murthy <arun.murthy@stericsson.com>

 * Licensed under GPLv2.

 */



#ifndef _AB8500_BM_H

#define _AB8500_BM_H



#include <linux/kernel.h>



/*

 * System control 2 register offsets.

 * bank = 0x02

 */

#define AB8500_MAIN_WDOG_CTRL_REG	0x01

#define AB8500_LOW_BAT_REG		0x03

#define AB8500_BATT_OK_REG		0x04

/*

 * USB/ULPI register offsets

 * Bank : 0x5

 */

#define AB8500_USB_LINE_STAT_REG	0x80



/*

 * Charger / status register offfsets

 * Bank : 0x0B

 */

#define AB8500_CH_STATUS1_REG		0x00

#define AB8500_CH_STATUS2_REG		0x01

#define AB8500_CH_USBCH_STAT1_REG	0x02

#define AB8500_CH_USBCH_STAT2_REG	0x03

#define AB8500_CH_FSM_STAT_REG		0x04

#define AB8500_CH_STAT_REG		0x05



/*

 * Charger / control register offfsets

 * Bank : 0x0B

 */

#define AB8500_CH_VOLT_LVL_REG		0x40

#define AB8500_CH_VOLT_LVL_MAX_REG	0x41  /*Only in Cut2.0*/

#define AB8500_CH_OPT_CRNTLVL_REG	0x42

#define AB8500_CH_OPT_CRNTLVL_MAX_REG	0x43  /*Only in Cut2.0*/

#define AB8500_CH_WD_TIMER_REG		0x50

#define AB8500_CHARG_WD_CTRL		0x51

#define AB8500_BTEMP_HIGH_TH		0x52

#define AB8500_LED_INDICATOR_PWM_CTRL	0x53

#define AB8500_LED_INDICATOR_PWM_DUTY	0x54

#define AB8500_BATT_OVV			0x55

#define AB8500_CHARGER_CTRL		0x56

#define AB8500_BAT_CTRL_CURRENT_SOURCE	0x60  /*Only in Cut2.0*/



/*

 * Charger / main control register offsets

 * Bank : 0x0B

 */

#define AB8500_MCH_CTRL1		0x80

#define AB8500_MCH_CTRL2		0x81

#define AB8500_MCH_IPT_CURLVL_REG	0x82

#define AB8500_CH_WD_REG		0x83



/*

 * Charger / USB control register offsets

 * Bank : 0x0B

 */

#define AB8500_USBCH_CTRL1_REG		0xC0

#define AB8500_USBCH_CTRL2_REG		0xC1

#define AB8500_USBCH_IPT_CRNTLVL_REG	0xC2



/*

 * Gas Gauge register offsets

 * Bank : 0x0C

 */

#define AB8500_GASG_CC_CTRL_REG		0x00

#define AB8500_GASG_CC_ACCU1_REG	0x01

#define AB8500_GASG_CC_ACCU2_REG	0x02

#define AB8500_GASG_CC_ACCU3_REG	0x03

#define AB8500_GASG_CC_ACCU4_REG	0x04

#define AB8500_GASG_CC_SMPL_CNTRL_REG	0x05

#define AB8500_GASG_CC_SMPL_CNTRH_REG	0x06

#define AB8500_GASG_CC_SMPL_CNVL_REG	0x07

#define AB8500_GASG_CC_SMPL_CNVH_REG	0x08

#define AB8500_GASG_CC_CNTR_AVGOFF_REG	0x09

#define AB8500_GASG_CC_OFFSET_REG	0x0A

#define AB8500_GASG_CC_NCOV_ACCU	0x10

#define AB8500_GASG_CC_NCOV_ACCU_CTRL	0x11

#define AB8500_GASG_CC_NCOV_ACCU_LOW	0x12

#define AB8500_GASG_CC_NCOV_ACCU_MED	0x13

#define AB8500_GASG_CC_NCOV_ACCU_HIGH	0x14



/*

 * Interrupt register offsets

 * Bank : 0x0E

 */

#define AB8500_IT_SOURCE2_REG		0x01

#define AB8500_IT_SOURCE21_REG		0x14



/*

 * RTC register offsets

 * Bank: 0x0F

 */

#define AB8500_RTC_BACKUP_CHG_REG	0x0C

#define AB8500_RTC_CC_CONF_REG		0x01

#define AB8500_RTC_CTRL_REG		0x0B



/*

 * OTP register offsets

 * Bank : 0x15

 */

#define AB8500_OTP_CONF_15		0x0E



/* GPADC constants from AB8500 spec, UM0836 */

#define ADC_RESOLUTION			1024

#define ADC_CH_MAIN_MIN			0

#define ADC_CH_MAIN_MAX			20030

#define ADC_CH_VBUS_MIN			0

#define ADC_CH_VBUS_MAX			20030

#define ADC_CH_VBAT_MIN			2300

#define ADC_CH_VBAT_MAX			4800

#define ADC_CH_BKBAT_MIN		0

#define ADC_CH_BKBAT_MAX		3200



/* Main charge i/p current */

#define MAIN_CH_IP_CUR_0P9A		0x80

#define MAIN_CH_IP_CUR_1P0A		0x90

#define MAIN_CH_IP_CUR_1P1A		0xA0

#define MAIN_CH_IP_CUR_1P2A		0xB0

#define MAIN_CH_IP_CUR_1P3A		0xC0

#define MAIN_CH_IP_CUR_1P4A		0xD0

#define MAIN_CH_IP_CUR_1P5A		0xE0



/* ChVoltLevel */

#define CH_VOL_LVL_3P5			0x00

#define CH_VOL_LVL_4P0			0x14

#define CH_VOL_LVL_4P05			0x16

#define CH_VOL_LVL_4P1			0x1B

#define CH_VOL_LVL_4P15			0x20

#define CH_VOL_LVL_4P2			0x25

#define CH_VOL_LVL_4P6			0x4D



/* ChOutputCurrentLevel */

#define CH_OP_CUR_LVL_0P1		0x00

#define CH_OP_CUR_LVL_0P2		0x01

#define CH_OP_CUR_LVL_0P3		0x02

#define CH_OP_CUR_LVL_0P4		0x03

#define CH_OP_CUR_LVL_0P5		0x04

#define CH_OP_CUR_LVL_0P6		0x05

#define CH_OP_CUR_LVL_0P7		0x06

#define CH_OP_CUR_LVL_0P8		0x07

#define CH_OP_CUR_LVL_0P9		0x08

#define CH_OP_CUR_LVL_1P4		0x0D

#define CH_OP_CUR_LVL_1P5		0x0E

#define CH_OP_CUR_LVL_1P6		0x0F



/* BTEMP High thermal limits */

#define BTEMP_HIGH_TH_57_0		0x00

#define BTEMP_HIGH_TH_52		0x01

#define BTEMP_HIGH_TH_57_1		0x02

#define BTEMP_HIGH_TH_62		0x03



/* current is mA */

#define USB_0P1A			100

#define USB_0P2A			200

#define USB_0P3A			300

#define USB_0P4A			400

#define USB_0P5A			500



#define LOW_BAT_3P1V			0x20

#define LOW_BAT_2P3V			0x00

#define LOW_BAT_RESET			0x01

#define LOW_BAT_ENABLE			0x01



/* Backup battery constants */

#define BUP_ICH_SEL_50UA		0x00

#define BUP_ICH_SEL_150UA		0x04

#define BUP_ICH_SEL_300UA		0x08

#define BUP_ICH_SEL_700UA		0x0C



#define BUP_VCH_SEL_2P5V		0x00

#define BUP_VCH_SEL_2P6V		0x01

#define BUP_VCH_SEL_2P8V		0x02

#define BUP_VCH_SEL_3P1V		0x03



/* Battery OVV constants */

#define BATT_OVV_ENA			0x02

#define BATT_OVV_TH_3P7			0x00

#define BATT_OVV_TH_4P75		0x01



/* A value to indicate over voltage */

#define BATT_OVV_VALUE			4750



/* VBUS OVV constants */

#define VBUS_OVV_SELECT_MASK		0x78

#define VBUS_OVV_SELECT_5P6V		0x00

#define VBUS_OVV_SELECT_5P7V		0x08

#define VBUS_OVV_SELECT_5P8V		0x10

#define VBUS_OVV_SELECT_5P9V		0x18

#define VBUS_OVV_SELECT_6P0V		0x20

#define VBUS_OVV_SELECT_6P1V		0x28

#define VBUS_OVV_SELECT_6P2V		0x30

#define VBUS_OVV_SELECT_6P3V		0x38



#define VBUS_AUTO_IN_CURR_LIM_ENA	0x04



/* Fuel Gauge constants */

#define RESET_ACCU			0x02

#define READ_REQ			0x01

#define CC_DEEP_SLEEP_ENA		0x02

#define CC_PWR_UP_ENA			0x01

#define CC_SAMPLES_40			0x28

#define RD_NCONV_ACCU_REQ		0x01

#define CC_CALIB			0x08

#define CC_INTAVGOFFSET_ENA		0x10

#define CC_MUXOFFSET			0x80

#define CC_INT_CAL_N_AVG_MASK		0x60

#define CC_INT_CAL_SAMPLES_16		0x40

#define CC_INT_CAL_SAMPLES_8		0x20

#define CC_INT_CAL_SAMPLES_4		0x00



/* RTC constants */

#define RTC_BUP_CH_ENA			0x10



/* BatCtrl Current Source Constants */

#define BAT_CTRL_7U_ENA			0x01

#define BAT_CTRL_20U_ENA		0x02

#define BAT_CTRL_CMP_ENA		0x04

#define FORCE_BAT_CTRL_CMP_HIGH		0x08

#define BAT_CTRL_PULL_UP_ENA		0x10



/* Battery type */

#define BATTERY_UNKNOWN			00



/*

 * ADC for the battery thermistor.

 * When using the ADC_THERM_BATCTRL the battery ID resistor is combined with

 * a NTC resistor to both identify the battery and to measure its temperature.

 * Different phone manufactures uses different techniques to both identify the

 * battery and to read its temperature.

 */

enum adc_therm {

	ADC_THERM_BATCTRL,

	ADC_THERM_BATTEMP,

};



/**

 * struct res_to_temp - defines one point in a temp to res curve. To

 * be used in battery packs that combines the identification resistor with a

 * NTC resistor.

 * @temp:			battery pack temperature in Celcius

 * @resist:			NTC resistor net total resistance

 */

struct res_to_temp {

	int temp;

	int resist;

};



/**

 * struct batres_vs_temp - defines one point in a temp vs battery internal

 * resistance curve.

 * @temp:			battery pack temperature in Celcius

 * @resist:			battery internal reistance in mOhm

 */

struct batres_vs_temp {

	int temp;

	int resist;

};



/**

 * struct v_to_cap - Table for translating voltage to capacity

 * @voltage:		Voltage in mV

 * @capacity:		Capacity in percent

 */

struct v_to_cap {

	int voltage;

	int capacity;

};



/* Forward declaration */

struct ab8500_fg;



/**

 * struct ab8500_fg_parameters - Fuel gauge algorithm parameters, in seconds

 * if not specified

 * @recovery_sleep_timer:	Time between measurements while recovering

 * @recovery_total_time:	Total recovery time

 * @init_timer:			Measurement interval during startup

 * @init_discard_time:		Time we discard voltage measurement at startup

 * @init_total_time:		Total init time during startup

 * @high_curr_time:		Time current has to be high to go to recovery

 * @accu_charging:		FG accumulation time while charging

 * @accu_high_curr:		FG accumulation time in high current mode

 * @high_curr_threshold:	High current threshold, in mA

 * @lowbat_threshold:		Low battery threshold, in mV

 * @battok_falling_th_sel0	Threshold in mV for battOk signal sel0

 *				Resolution in 50 mV step.

 * @battok_raising_th_sel1	Threshold in mV for battOk signal sel1

 *				Resolution in 50 mV step.

 * @user_cap_limit		Capacity reported from user must be within this

 *				limit to be considered as sane, in percentage

 *				points.

 * @maint_thres			This is the threshold where we stop reporting

 *				battery full while in maintenance, in per cent

 */

struct ab8500_fg_parameters {

	int recovery_sleep_timer;

	int recovery_total_time;

	int init_timer;

	int init_discard_time;

	int init_total_time;

	int high_curr_time;

	int accu_charging;

	int accu_high_curr;

	int high_curr_threshold;

	int lowbat_threshold;

	int battok_falling_th_sel0;

	int battok_raising_th_sel1;

	int user_cap_limit;

	int maint_thres;

};



/**

 * struct ab8500_charger_maximization - struct used by the board config.

 * @use_maxi:		Enable maximization for this battery type

 * @maxi_chg_curr:	Maximum charger current allowed

 * @maxi_wait_cycles:	cycles to wait before setting charger current

 * @charger_curr_step	delta between two charger current settings (mA)

 */

struct ab8500_maxim_parameters {

	bool ena_maxi;

	int chg_curr;

	int wait_cycles;

	int charger_curr_step;

};



/**

 * struct battery_type - different batteries supported

 * @name:			battery technology

 * @resis_high:			battery upper resistance limit

 * @resis_low:			battery lower resistance limit

 * @charge_full_design:		Maximum battery capacity in mAh

 * @nominal_voltage:		Nominal voltage of the battery in mV

 * @termination_vol:		max voltage upto which battery can be charged

 * @termination_curr		battery charging termination current in mA

 * @recharge_vol		battery voltage limit that will trigger a new

 *				full charging cycle in the case where maintenan-

 *				-ce charging has been disabled

 * @normal_cur_lvl:		charger current in normal state in mA

 * @normal_vol_lvl:		charger voltage in normal state in mV

 * @maint_a_cur_lvl:		charger current in maintenance A state in mA

 * @maint_a_vol_lvl:		charger voltage in maintenance A state in mV

 * @maint_a_chg_timer_h:	charge time in maintenance A state

 * @maint_b_cur_lvl:		charger current in maintenance B state in mA

 * @maint_b_vol_lvl:		charger voltage in maintenance B state in mV

 * @maint_b_chg_timer_h:	charge time in maintenance B state

 * @low_high_cur_lvl:		charger current in temp low/high state in mA

 * @low_high_vol_lvl:		charger voltage in temp low/high state in mV'

 * @battery_resistance:		battery inner resistance in mOhm.

 * @n_r_t_tbl_elements:		number of elements in r_to_t_tbl

 * @r_to_t_tbl:			table containing resistance to temp points

 * @n_v_cap_tbl_elements:	number of elements in v_to_cap_tbl

 * @v_to_cap_tbl:		Voltage to capacity (in %) table

 * @n_batres_tbl_elements	number of elements in the batres_tbl

 * @batres_tbl			battery internal resistance vs temperature table

 */

struct battery_type {

	int name;

	int resis_high;

	int resis_low;

	int charge_full_design;

	int nominal_voltage;

	int termination_vol;

	int termination_curr;

	int recharge_vol;

	int normal_cur_lvl;

	int normal_vol_lvl;

	int maint_a_cur_lvl;

	int maint_a_vol_lvl;

	int maint_a_chg_timer_h;

	int maint_b_cur_lvl;

	int maint_b_vol_lvl;

	int maint_b_chg_timer_h;

	int low_high_cur_lvl;

	int low_high_vol_lvl;

	int battery_resistance;

	int n_temp_tbl_elements;

	struct res_to_temp *r_to_t_tbl;

	int n_v_cap_tbl_elements;

	struct v_to_cap *v_to_cap_tbl;

	int n_batres_tbl_elements;

	struct batres_vs_temp *batres_tbl;

};



/**

 * struct ab8500_bm_capacity_levels - ab8500 capacity level data

 * @critical:		critical capacity level in percent

 * @low:		low capacity level in percent

 * @normal:		normal capacity level in percent

 * @high:		high capacity level in percent

 * @full:		full capacity level in percent

 */

struct ab8500_bm_capacity_levels {

	int critical;

	int low;

	int normal;

	int high;

	int full;

};



/**

 * struct ab8500_bm_charger_parameters - Charger specific parameters

 * @usb_volt_max:	maximum allowed USB charger voltage in mV

 * @usb_curr_max:	maximum allowed USB charger current in mA

 * @ac_volt_max:	maximum allowed AC charger voltage in mV

 * @ac_curr_max:	maximum allowed AC charger current in mA

 */

struct ab8500_bm_charger_parameters {

	int usb_volt_max;

	int usb_curr_max;

	int ac_volt_max;

	int ac_curr_max;

};



/**

 * struct ab8500_bm_data - ab8500 battery management data

 * @temp_under		under this temp, charging is stopped

 * @temp_low		between this temp and temp_under charging is reduced

 * @temp_high		between this temp and temp_over charging is reduced

 * @temp_over		over this temp, charging is stopped

 * @temp_interval_chg	temperature measurement interval in s when charging

 * @temp_interval_nochg	temperature measurement interval in s when not charging

 * @main_safety_tmr_h	safety timer for main charger

 * @usb_safety_tmr_h	safety timer for usb charger

 * @bkup_bat_v		voltage which we charge the backup battery with

 * @bkup_bat_i		current which we charge the backup battery with

 * @no_maintenance	indicates that maintenance charging is disabled

 * @adc_therm		placement of thermistor, batctrl or battemp adc

 * @chg_unknown_bat	flag to enable charging of unknown batteries

 * @enable_overshoot	flag to enable VBAT overshoot control

 * @fg_res		resistance of FG resistor in 0.1mOhm

 * @n_btypes		number of elements in array bat_type

 * @batt_id		index of the identified battery in array bat_type

 * @interval_charging	charge alg cycle period time when charging (sec)

 * @interval_not_charging charge alg cycle period time when not charging (sec)

 * @temp_hysteresis	temperature hysteresis

 * @gnd_lift_resistance	Battery ground to phone ground resistance (mOhm)

 * @maxi:		maximization parameters

 * @cap_levels		capacity in percent for the different capacity levels

 * @bat_type		table of supported battery types

 * @chg_params		charger parameters

 * @fg_params		fuel gauge parameters

 */

struct ab8500_bm_data {

	int temp_under;

	int temp_low;

	int temp_high;

	int temp_over;

	int temp_interval_chg;

	int temp_interval_nochg;

	int main_safety_tmr_h;

	int usb_safety_tmr_h;

	int bkup_bat_v;

	int bkup_bat_i;

	bool no_maintenance;

	bool chg_unknown_bat;

	bool enable_overshoot;

	enum adc_therm adc_therm;

	int fg_res;

	int n_btypes;

	int batt_id;

	int interval_charging;

	int interval_not_charging;

	int temp_hysteresis;

	int gnd_lift_resistance;

	const struct ab8500_maxim_parameters *maxi;

	const struct ab8500_bm_capacity_levels *cap_levels;

	const struct battery_type *bat_type;

	const struct ab8500_bm_charger_parameters *chg_params;

	const struct ab8500_fg_parameters *fg_params;

};



struct ab8500_charger_platform_data {

	char **supplied_to;

	size_t num_supplicants;

	bool autopower_cfg;

};



struct ab8500_btemp_platform_data {

	char **supplied_to;

	size_t num_supplicants;

};



struct ab8500_fg_platform_data {

	char **supplied_to;

	size_t num_supplicants;

};



struct ab8500_chargalg_platform_data {

	char **supplied_to;

	size_t num_supplicants;

};

struct ab8500_btemp;

struct ab8500_gpadc;

struct ab8500_fg;

#ifdef CONFIG_AB8500_BM

void ab8500_fg_reinit(void);

void ab8500_charger_usb_state_changed(u8 bm_usb_state, u16 mA);

struct ab8500_btemp *ab8500_btemp_get(void);

int ab8500_btemp_get_batctrl_temp(struct ab8500_btemp *btemp);

struct ab8500_fg *ab8500_fg_get(void);

int ab8500_fg_inst_curr_blocking(struct ab8500_fg *dev);

int ab8500_fg_inst_curr_start(struct ab8500_fg *di);

int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res);

int ab8500_fg_inst_curr_done(struct ab8500_fg *di);



#else

int ab8500_fg_inst_curr_done(struct ab8500_fg *di)

{

}

static void ab8500_fg_reinit(void)

{

}

static void ab8500_charger_usb_state_changed(u8 bm_usb_state, u16 mA)

{

}

static struct ab8500_btemp *ab8500_btemp_get(void)

{

	return NULL;

}

static int ab8500_btemp_get_batctrl_temp(struct ab8500_btemp *btemp)

{

	return 0;

}

struct ab8500_fg *ab8500_fg_get(void)

{

	return NULL;

}

static int ab8500_fg_inst_curr_blocking(struct ab8500_fg *dev)

{

	return -ENODEV;

}



static inline int ab8500_fg_inst_curr_start(struct ab8500_fg *di)

{

	return -ENODEV;

}



static inline int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res)

{

	return -ENODEV;

}



#endif

#endif /* _AB8500_BM_H */

CRA Git | Maintained and supported by SUSTech CRA and CCSE