Commit 8395ae83 authored by Bruce Allan's avatar Bruce Allan Committed by David S. Miller
Browse files

e1000e: 82577/8/9 issues with device in Sx 



When going to Sx, disable gigabit in PHY (e1000_oem_bits_config_ich8lan)
in addition to the MAC before configuring PHY wakeup otherwise the PHY
configuration writes might be missed.  Also write the LED configuration
and SMBus address to the PHY registers (e1000_oem_bits_config_ich8lan and
e1000_write_smbus_addr, respectively).  The reset is no longer needed
since re-auto-negotiation is forced in e1000_oem_bits_config_ich8lan and
leaving it in causes issues with auto-negotiating the link.

Signed-off-by: default avatarBruce Allan <bruce.w.allan@intel.com>
Tested-by: default avatarJeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 94e22389

drivers/net/e1000e/ich8lan.c

+39 −8
Original line number Diff line number Diff line
@@ -125,6 +125,7 @@ 


/* SMBus Address Phy Register */

#define HV_SMB_ADDR            PHY_REG(768, 26)

#define HV_SMB_ADDR_MASK       0x007F

#define HV_SMB_ADDR_PEC_EN     0x0200

#define HV_SMB_ADDR_VALID      0x0080
@@ -894,6 +895,34 @@ static s32 e1000_check_reset_block_ich8lan(struct e1000_hw *hw) 
	return (fwsm & E1000_ICH_FWSM_RSPCIPHY) ? 0 : E1000_BLK_PHY_RESET;

}



/**

 *  e1000_write_smbus_addr - Write SMBus address to PHY needed during Sx states

 *  @hw: pointer to the HW structure

 *

 *  Assumes semaphore already acquired.

 *

 **/

static s32 e1000_write_smbus_addr(struct e1000_hw *hw)

{

	u16 phy_data;

	u32 strap = er32(STRAP);

	s32 ret_val = 0;



	strap &= E1000_STRAP_SMBUS_ADDRESS_MASK;



	ret_val = e1000_read_phy_reg_hv_locked(hw, HV_SMB_ADDR, &phy_data);

	if (ret_val)

		goto out;



	phy_data &= ~HV_SMB_ADDR_MASK;

	phy_data |= (strap >> E1000_STRAP_SMBUS_ADDRESS_SHIFT);

	phy_data |= HV_SMB_ADDR_PEC_EN | HV_SMB_ADDR_VALID;

	ret_val = e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR, phy_data);



out:

	return ret_val;

}



/**

 *  e1000_sw_lcd_config_ich8lan - SW-based LCD Configuration

 *  @hw:   pointer to the HW structure
@@ -970,12 +999,7 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw) 
		 * When both NVM bits are cleared, SW will configure

		 * them instead.

		 */

		data = er32(STRAP);

		data &= E1000_STRAP_SMBUS_ADDRESS_MASK;

		reg_data = data >> E1000_STRAP_SMBUS_ADDRESS_SHIFT;

		reg_data |= HV_SMB_ADDR_PEC_EN | HV_SMB_ADDR_VALID;

		ret_val = e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR,

							reg_data);

		ret_val = e1000_write_smbus_addr(hw);

		if (ret_val)

			goto out;
@@ -3460,13 +3484,20 @@ void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw) 
void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw)

{

	u32 phy_ctrl;

	s32 ret_val;



	phy_ctrl = er32(PHY_CTRL);

	phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU | E1000_PHY_CTRL_GBE_DISABLE;

	ew32(PHY_CTRL, phy_ctrl);



	if (hw->mac.type >= e1000_pchlan)

		e1000_phy_hw_reset_ich8lan(hw);

	if (hw->mac.type >= e1000_pchlan) {

		e1000_oem_bits_config_ich8lan(hw, true);

		ret_val = hw->phy.ops.acquire(hw);

		if (ret_val)

			return;

		e1000_write_smbus_addr(hw);

		hw->phy.ops.release(hw);

	}

}



/**

CRA Git | Maintained and supported by SUSTech CRA and CCSE