ARM: dts: add DTS for NetCom Plus 4xx and 8xx device series (830834c4) · Commits · 戴 / test

arch/arm/boot/dts/Makefile

+1 −0

Original line number	Diff line number	Diff line
		@@ -755,6 +755,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
		am335x-nano.dtb \
		am335x-netcan-plus-1xx.dtb \
		am335x-netcom-plus-2xx.dtb \
		am335x-netcom-plus-8xx.dtb \
		am335x-pdu001.dtb \
		am335x-pepper.dtb \
		am335x-phycore-rdk.dtb \

arch/arm/boot/dts/am335x-netcom-plus-8xx.dts

0 → 100644

+115 −0

Original line number	Diff line number	Diff line
		// SPDX-License-Identifier: GPL-2.0-only
		/*
		* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
		*/

		/*
		* VScom OnRISC
		* http://www.vscom.de
		*/

		/dts-v1/;

		#include "am335x-baltos.dtsi"

		/ {
		model = "NetCom Plus";
		};

		&am33xx_pinmux {
		pinctrl-names = "default";
		pinctrl-0 = <&dip_switches>;

		dip_switches: pinmux_dip_switches {
		pinctrl-single,pins = <
		AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLDOWN, MUX_MODE7)
		AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)
		AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)
		AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)
		>;
		};

		tca6416_pins: pinmux_tca6416_pins {
		pinctrl-single,pins = <
		AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7)
		>;
		};

		i2c2_pins: pinmux_i2c2_pins {
		pinctrl-single,pins = <
		AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE3)
		AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE3)
		>;
		};
		};

		&usb0_phy {
		status = "okay";
		};

		&usb1_phy {
		status = "okay";
		};

		&usb0 {
		status = "okay";
		dr_mode = "host";
		};

		&usb1 {
		status = "okay";
		dr_mode = "host";
		};

		&i2c1 {
		tca6416a: gpio@20 {
		compatible = "ti,tca6416";
		reg = <0x20>;
		gpio-controller;
		#gpio-cells = <2>;
		interrupt-parent = <&gpio0>;
		interrupts = <20 IRQ_TYPE_EDGE_RISING>;
		pinctrl-names = "default";
		pinctrl-0 = <&tca6416_pins>;
		};
		};

		&i2c2 {
		pinctrl-names = "default";
		pinctrl-0 = <&i2c2_pins>;

		status = "okay";
		clock-frequency = <400000>;

		tca6416b: gpio@20 {
		compatible = "ti,tca6416";
		reg = <0x20>;
		gpio-controller;
		#gpio-cells = <2>;
		};

		tca6416c: gpio@21 {
		compatible = "ti,tca6416";
		reg = <0x21>;
		gpio-controller;
		#gpio-cells = <2>;
		};
		};

		&davinci_mdio {
		phy0: ethernet-phy@0 {
		reg = <1>;
		};
		};

		&cpsw_emac0 {
		phy-mode = "rmii";
		dual_emac_res_vlan = <1>;
		phy-handle = <&phy0>;
		};

		&cpsw_emac1 {
		phy-mode = "rgmii-id";
		dual_emac_res_vlan = <2>;
		phy-handle = <&phy1>;
		};

Admin message