Commit 823c9fae authored by Olof Johansson's avatar Olof Johansson
Browse files

Merge branch 'next/cam-samsung' of... 

Merge branch 'next/cam-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc

From Kukjin Kim:
Just adding camif gpio setup and clkdev.

* 'next/cam-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung

:
  ARM: S3C24XX: Add clkdev entry for camif-upll clock
  ARM: SAMSUNG: Add s3c24xx/s3c64xx CAMIF GPIO setup helpers
  + Linux 3.7-rc6

Conflicts due to the 3.7-rc6 sync: arch/arm/mach-highbank/system.c
include/linux/clk-provider.h, resolved as in other branches.

Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parents 5b7897db 7d3b5fac

Documentation/cgroups/memory.txt

+4 −0
Original line number Diff line number Diff line
@@ -466,6 +466,10 @@ Note: 
5.3 swappiness



Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only.

Please note that unlike the global swappiness, memcg knob set to 0

really prevents from any swapping even if there is a swap storage

available. This might lead to memcg OOM killer if there are no file

pages to reclaim.



Following cgroups' swappiness can't be changed.

- root cgroup (uses /proc/sys/vm/swappiness).

Documentation/filesystems/proc.txt

+12 −4
Original line number Diff line number Diff line
@@ -33,7 +33,7 @@ Table of Contents 
  2	Modifying System Parameters



  3	Per-Process Parameters

  3.1	/proc/<pid>/oom_score_adj - Adjust the oom-killer

  3.1	/proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj - Adjust the oom-killer

								score

  3.2	/proc/<pid>/oom_score - Display current oom-killer score

  3.3	/proc/<pid>/io - Display the IO accounting fields
@@ -1320,10 +1320,10 @@ of the kernel. 
CHAPTER 3: PER-PROCESS PARAMETERS

------------------------------------------------------------------------------



3.1 /proc/<pid>/oom_score_adj- Adjust the oom-killer score

3.1 /proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj- Adjust the oom-killer score

--------------------------------------------------------------------------------



This file can be used to adjust the badness heuristic used to select which

These file can be used to adjust the badness heuristic used to select which

process gets killed in out of memory conditions.



The badness heuristic assigns a value to each candidate task ranging from 0
@@ -1361,6 +1361,12 @@ same system, cpuset, mempolicy, or memory controller resources to use at least 
equivalent to discounting 50% of the task's allowed memory from being considered

as scoring against the task.



For backwards compatibility with previous kernels, /proc/<pid>/oom_adj may also

be used to tune the badness score.  Its acceptable values range from -16

(OOM_ADJUST_MIN) to +15 (OOM_ADJUST_MAX) and a special value of -17

(OOM_DISABLE) to disable oom killing entirely for that task.  Its value is

scaled linearly with /proc/<pid>/oom_score_adj.



The value of /proc/<pid>/oom_score_adj may be reduced no lower than the last

value set by a CAP_SYS_RESOURCE process. To reduce the value any lower

requires CAP_SYS_RESOURCE.
@@ -1375,7 +1381,9 @@ minimal amount of work. 
-------------------------------------------------------------



This file can be used to check the current score used by the oom-killer is for

any given <pid>.

any given <pid>. Use it together with /proc/<pid>/oom_score_adj to tune which

process should be killed in an out-of-memory situation.





3.3  /proc/<pid>/io - Display the IO accounting fields

-------------------------------------------------------

Documentation/networking/netdev-features.txt

+1 −1
Original line number Diff line number Diff line
@@ -164,4 +164,4 @@ read the CRC recorded by the NIC on receipt of the packet. 
This requests that the NIC receive all possible frames, including errored

frames (such as bad FCS, etc).  This can be helpful when sniffing a link with

bad packets on it.  Some NICs may receive more packets if also put into normal

PROMISC mdoe.
 
PROMISC mode.

MAINTAINERS

+59 −9
Original line number Diff line number Diff line
@@ -3609,6 +3609,49 @@ F: drivers/hid/hid-hyperv.c 
F:	drivers/net/hyperv/

F:	drivers/staging/hv/



I2C OVER PARALLEL PORT

M:	Jean Delvare <khali@linux-fr.org>

L:	linux-i2c@vger.kernel.org

S:	Maintained

F:	Documentation/i2c/busses/i2c-parport

F:	Documentation/i2c/busses/i2c-parport-light

F:	drivers/i2c/busses/i2c-parport.c

F:	drivers/i2c/busses/i2c-parport-light.c



I2C/SMBUS CONTROLLER DRIVERS FOR PC

M:	Jean Delvare <khali@linux-fr.org>

L:	linux-i2c@vger.kernel.org

S:	Maintained

F:	Documentation/i2c/busses/i2c-ali1535

F:	Documentation/i2c/busses/i2c-ali1563

F:	Documentation/i2c/busses/i2c-ali15x3

F:	Documentation/i2c/busses/i2c-amd756

F:	Documentation/i2c/busses/i2c-amd8111

F:	Documentation/i2c/busses/i2c-i801

F:	Documentation/i2c/busses/i2c-nforce2

F:	Documentation/i2c/busses/i2c-piix4

F:	Documentation/i2c/busses/i2c-sis5595

F:	Documentation/i2c/busses/i2c-sis630

F:	Documentation/i2c/busses/i2c-sis96x

F:	Documentation/i2c/busses/i2c-via

F:	Documentation/i2c/busses/i2c-viapro

F:	drivers/i2c/busses/i2c-ali1535.c

F:	drivers/i2c/busses/i2c-ali1563.c

F:	drivers/i2c/busses/i2c-ali15x3.c

F:	drivers/i2c/busses/i2c-amd756.c

F:	drivers/i2c/busses/i2c-amd756-s4882.c

F:	drivers/i2c/busses/i2c-amd8111.c

F:	drivers/i2c/busses/i2c-i801.c

F:	drivers/i2c/busses/i2c-isch.c

F:	drivers/i2c/busses/i2c-nforce2.c

F:	drivers/i2c/busses/i2c-nforce2-s4985.c

F:	drivers/i2c/busses/i2c-piix4.c

F:	drivers/i2c/busses/i2c-sis5595.c

F:	drivers/i2c/busses/i2c-sis630.c

F:	drivers/i2c/busses/i2c-sis96x.c

F:	drivers/i2c/busses/i2c-via.c

F:	drivers/i2c/busses/i2c-viapro.c



I2C/SMBUS STUB DRIVER

M:	"Mark M. Hoffman" <mhoffman@lightlink.com>

L:	linux-i2c@vger.kernel.org
@@ -3616,9 +3659,8 @@ S: Maintained 
F:	drivers/i2c/busses/i2c-stub.c



I2C SUBSYSTEM

M:	"Jean Delvare (PC drivers, core)" <khali@linux-fr.org>

M:	Wolfram Sang <w.sang@pengutronix.de>

M:	"Ben Dooks (embedded platforms)" <ben-linux@fluff.org>

M:	"Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de>

L:	linux-i2c@vger.kernel.org

W:	http://i2c.wiki.kernel.org/

T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
@@ -3629,6 +3671,13 @@ F: drivers/i2c/ 
F:	include/linux/i2c.h

F:	include/linux/i2c-*.h



I2C-TAOS-EVM DRIVER

M:	Jean Delvare <khali@linux-fr.org>

L:	linux-i2c@vger.kernel.org

S:	Maintained

F:	Documentation/i2c/busses/i2c-taos-evm

F:	drivers/i2c/busses/i2c-taos-evm.c



I2C-TINY-USB DRIVER

M:	Till Harbaum <till@harbaum.org>

L:	linux-i2c@vger.kernel.org
@@ -7221,6 +7270,14 @@ L: linux-xtensa@linux-xtensa.org 
S:	Maintained

F:	arch/xtensa/



THERMAL

M:      Zhang Rui <rui.zhang@intel.com>

L:      linux-pm@vger.kernel.org

T:      git git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git

S:      Supported

F:      drivers/thermal/

F:      include/linux/thermal.h



THINKPAD ACPI EXTRAS DRIVER

M:	Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>

L:	ibm-acpi-devel@lists.sourceforge.net
@@ -7898,13 +7955,6 @@ M: Roger Luethi <rl@hellgate.ch> 
S:	Maintained

F:	drivers/net/ethernet/via/via-rhine.c



VIAPRO SMBUS DRIVER

M:	Jean Delvare <khali@linux-fr.org>

L:	linux-i2c@vger.kernel.org

S:	Maintained

F:	Documentation/i2c/busses/i2c-viapro

F:	drivers/i2c/busses/i2c-viapro.c



VIA SD/MMC CARD CONTROLLER DRIVER

M:	Bruce Chang <brucechang@via.com.tw>

M:	Harald Welte <HaraldWelte@viatech.com>

Makefile

+1 −1
Original line number Diff line number Diff line 
VERSION = 3

PATCHLEVEL = 7

SUBLEVEL = 0

EXTRAVERSION = -rc5

EXTRAVERSION = -rc6

NAME = Terrified Chipmunk



# *DOCUMENTATION*

CRA Git | Maintained and supported by SUSTech CRA and CCSE