Input: synaptics-rmi4 - add SMBus support (82264d0c) · Commits · 戴 / test

drivers/input/rmi4/Kconfig

+12 −0

Original line number	Diff line number	Diff line
		@@ -27,6 +27,18 @@ config RMI4_SPI

		If unsure, say N.

		config RMI4_SMB
		tristate "RMI4 SMB Support"
		depends on RMI4_CORE && I2C
		help
		Say Y here if you want to support RMI4 devices connected to an SMB
		bus.

		If unsure, say N.

		To compile this driver as a module, choose M here: the module will be
		called rmi_smbus.

		config RMI4_2D_SENSOR
		bool
		depends on RMI4_CORE

drivers/input/rmi4/Makefile

+1 −0

Original line number	Diff line number	Diff line
		@@ -12,3 +12,4 @@ rmi_core-$(CONFIG_RMI4_F54) += rmi_f54.o
		# Transports
		obj-$(CONFIG_RMI4_I2C) += rmi_i2c.o
		obj-$(CONFIG_RMI4_SPI) += rmi_spi.o
		obj-$(CONFIG_RMI4_SMB) += rmi_smbus.o

drivers/input/rmi4/rmi_bus.h

+12 −0

Original line number	Diff line number	Diff line
		@@ -104,6 +104,18 @@ rmi_get_platform_data(struct rmi_device *d)

		bool rmi_is_physical_device(struct device *dev);

		/**
		* rmi_reset - reset a RMI4 device
		* @d: Pointer to an RMI device
		*
		* Calls for a reset of each function implemented by a specific device.
		* Returns 0 on success or a negative error code.
		*/
		static inline int rmi_reset(struct rmi_device *d)
		{
		return d->driver->reset_handler(d);
		}

		/**
		* rmi_read - read a single byte
		* @d: Pointer to an RMI device

drivers/input/rmi4/rmi_smbus.c

0 → 100644

+447 −0

Original line number	Diff line number	Diff line
		/*
		* Copyright (c) 2015 - 2016 Red Hat, Inc
		* Copyright (c) 2011, 2012 Synaptics Incorporated
		* Copyright (c) 2011 Unixphere
		*
		* This program is free software; you can redistribute it and/or modify it
		* under the terms of the GNU General Public License version 2 as published by
		* the Free Software Foundation.
		*/

		#include <linux/kernel.h>
		#include <linux/delay.h>
		#include <linux/i2c.h>
		#include <linux/interrupt.h>
		#include <linux/kconfig.h>
		#include <linux/lockdep.h>
		#include <linux/module.h>
		#include <linux/pm.h>
		#include <linux/rmi.h>
		#include <linux/slab.h>
		#include "rmi_driver.h"

		#define SMB_PROTOCOL_VERSION_ADDRESS 0xfd
		#define SMB_MAX_COUNT 32
		#define RMI_SMB2_MAP_SIZE 8 /* 8 entry of 4 bytes each */
		#define RMI_SMB2_MAP_FLAGS_WE 0x01

		struct mapping_table_entry {
		__le16 rmiaddr;
		u8 readcount;
		u8 flags;
		};

		struct rmi_smb_xport {
		struct rmi_transport_dev xport;
		struct i2c_client *client;

		struct mutex page_mutex;
		int page;
		u8 table_index;
		struct mutex mappingtable_mutex;
		struct mapping_table_entry mapping_table[RMI_SMB2_MAP_SIZE];
		};

		static int rmi_smb_get_version(struct rmi_smb_xport *rmi_smb)
		{
		struct i2c_client *client = rmi_smb->client;
		int retval;

		/* Check if for SMBus new version device by reading version byte. */
		retval = i2c_smbus_read_byte_data(client, SMB_PROTOCOL_VERSION_ADDRESS);
		if (retval < 0) {
		dev_err(&client->dev, "failed to get SMBus version number!\n");
		return retval;
		}
		return retval + 1;
		}

		/* SMB block write - wrapper over ic2_smb_write_block */
		static int smb_block_write(struct rmi_transport_dev *xport,
		u8 commandcode, const void *buf, size_t len)
		{
		struct rmi_smb_xport *rmi_smb =
		container_of(xport, struct rmi_smb_xport, xport);
		struct i2c_client *client = rmi_smb->client;
		int retval;

		retval = i2c_smbus_write_block_data(client, commandcode, len, buf);

		rmi_dbg(RMI_DEBUG_XPORT, &client->dev,
		"wrote %zd bytes at %#04x: %d (%*ph)\n",
		len, commandcode, retval, (int)len, buf);

		return retval;
		}

		/*
		* The function to get command code for smbus operations and keeps
		* records to the driver mapping table
		*/
		static int rmi_smb_get_command_code(struct rmi_transport_dev *xport,
		u16 rmiaddr, int bytecount, bool isread, u8 *commandcode)
		{
		struct rmi_smb_xport *rmi_smb =
		container_of(xport, struct rmi_smb_xport, xport);
		int i;
		int retval;
		struct mapping_table_entry mapping_data[1];

		mutex_lock(&rmi_smb->mappingtable_mutex);
		for (i = 0; i < RMI_SMB2_MAP_SIZE; i++) {
		if (rmi_smb->mapping_table[i].rmiaddr == rmiaddr) {
		if (isread) {
		if (rmi_smb->mapping_table[i].readcount
		== bytecount) {
		*commandcode = i;
		retval = 0;
		goto exit;
		}
		} else {
		if (rmi_smb->mapping_table[i].flags &
		RMI_SMB2_MAP_FLAGS_WE) {
		*commandcode = i;
		retval = 0;
		goto exit;
		}
		}
		}
		}
		i = rmi_smb->table_index;
		rmi_smb->table_index = (i + 1) % RMI_SMB2_MAP_SIZE;

		/* constructs mapping table data entry. 4 bytes each entry */
		memset(mapping_data, 0, sizeof(mapping_data));

		mapping_data[0].rmiaddr = cpu_to_le16(rmiaddr);
		mapping_data[0].readcount = bytecount;
		mapping_data[0].flags = !isread ? RMI_SMB2_MAP_FLAGS_WE : 0;

		retval = smb_block_write(xport, i + 0x80, mapping_data,
		sizeof(mapping_data));

		if (retval < 0) {
		/*
		* if not written to device mapping table
		* clear the driver mapping table records
		*/
		rmi_smb->mapping_table[i].rmiaddr = 0x0000;
		rmi_smb->mapping_table[i].readcount = 0;
		rmi_smb->mapping_table[i].flags = 0;
		goto exit;
		}
		/* save to the driver level mapping table */
		rmi_smb->mapping_table[i].rmiaddr = rmiaddr;
		rmi_smb->mapping_table[i].readcount = bytecount;
		rmi_smb->mapping_table[i].flags = !isread ? RMI_SMB2_MAP_FLAGS_WE : 0;
		*commandcode = i;

		exit:
		mutex_unlock(&rmi_smb->mappingtable_mutex);

		return retval;
		}

		static int rmi_smb_write_block(struct rmi_transport_dev *xport, u16 rmiaddr,
		const void *databuff, size_t len)
		{
		int retval = 0;
		u8 commandcode;
		struct rmi_smb_xport *rmi_smb =
		container_of(xport, struct rmi_smb_xport, xport);
		int cur_len = (int)len;

		mutex_lock(&rmi_smb->page_mutex);

		while (cur_len > 0) {
		/*
		* break into 32 bytes chunks to write get command code
		*/
		int block_len = min_t(int, len, SMB_MAX_COUNT);

		retval = rmi_smb_get_command_code(xport, rmiaddr, block_len,
		false, &commandcode);
		if (retval < 0)
		goto exit;

		retval = smb_block_write(xport, commandcode,
		databuff, block_len);
		if (retval < 0)
		goto exit;

		/* prepare to write next block of bytes */
		cur_len -= SMB_MAX_COUNT;
		databuff += SMB_MAX_COUNT;
		rmiaddr += SMB_MAX_COUNT;
		}
		exit:
		mutex_unlock(&rmi_smb->page_mutex);
		return retval;
		}

		/* SMB block read - wrapper over ic2_smb_read_block */
		static int smb_block_read(struct rmi_transport_dev *xport,
		u8 commandcode, void *buf, size_t len)
		{
		struct rmi_smb_xport *rmi_smb =
		container_of(xport, struct rmi_smb_xport, xport);
		struct i2c_client *client = rmi_smb->client;
		int retval;

		retval = i2c_smbus_read_block_data(client, commandcode, buf);
		if (retval < 0)
		return retval;

		return retval;
		}

		static int rmi_smb_read_block(struct rmi_transport_dev *xport, u16 rmiaddr,
		void *databuff, size_t len)
		{
		struct rmi_smb_xport *rmi_smb =
		container_of(xport, struct rmi_smb_xport, xport);
		int retval;
		u8 commandcode;
		int cur_len = (int)len;

		mutex_lock(&rmi_smb->page_mutex);
		memset(databuff, 0, len);

		while (cur_len > 0) {
		/* break into 32 bytes chunks to write get command code */
		int block_len = min_t(int, cur_len, SMB_MAX_COUNT);

		retval = rmi_smb_get_command_code(xport, rmiaddr, block_len,
		true, &commandcode);
		if (retval < 0)
		goto exit;

		retval = smb_block_read(xport, commandcode,
		databuff, block_len);
		if (retval < 0)
		goto exit;

		/* prepare to read next block of bytes */
		cur_len -= SMB_MAX_COUNT;
		databuff += SMB_MAX_COUNT;
		rmiaddr += SMB_MAX_COUNT;
		}

		retval = 0;

		exit:
		mutex_unlock(&rmi_smb->page_mutex);
		return retval;
		}

		static void rmi_smb_clear_state(struct rmi_smb_xport *rmi_smb)
		{
		/* the mapping table has been flushed, discard the current one */
		mutex_lock(&rmi_smb->mappingtable_mutex);
		memset(rmi_smb->mapping_table, 0, sizeof(rmi_smb->mapping_table));
		mutex_unlock(&rmi_smb->mappingtable_mutex);
		}

		static int rmi_smb_enable_smbus_mode(struct rmi_smb_xport *rmi_smb)
		{
		int retval;

		/* we need to get the smbus version to activate the touchpad */
		retval = rmi_smb_get_version(rmi_smb);
		if (retval < 0)
		return retval;

		return 0;
		}

		static int rmi_smb_reset(struct rmi_transport_dev *xport, u16 reset_addr)
		{
		struct rmi_smb_xport *rmi_smb =
		container_of(xport, struct rmi_smb_xport, xport);

		rmi_smb_clear_state(rmi_smb);

		/*
		* we do not call the actual reset command, it has to be handled in
		* PS/2 or there will be races between PS/2 and SMBus.
		* PS/2 should ensure that a psmouse_reset is called before
		* intializing the device and after it has been removed to be in a known
		* state.
		*/
		return rmi_smb_enable_smbus_mode(rmi_smb);
		}

		static const struct rmi_transport_ops rmi_smb_ops = {
		.write_block = rmi_smb_write_block,
		.read_block = rmi_smb_read_block,
		.reset = rmi_smb_reset,
		};

		static int rmi_smb_probe(struct i2c_client *client,
		const struct i2c_device_id *id)
		{
		struct rmi_device_platform_data *pdata = dev_get_platdata(&client->dev);
		struct rmi_smb_xport *rmi_smb;
		int retval;
		int smbus_version;

		if (!i2c_check_functionality(client->adapter,
		I2C_FUNC_SMBUS_READ_BLOCK_DATA \|
		I2C_FUNC_SMBUS_HOST_NOTIFY)) {
		dev_err(&client->dev,
		"adapter does not support required functionality.\n");
		return -ENODEV;
		}

		if (client->irq <= 0) {
		dev_err(&client->dev, "no IRQ provided, giving up.\n");
		return client->irq ? client->irq : -ENODEV;
		}

		rmi_smb = devm_kzalloc(&client->dev, sizeof(struct rmi_smb_xport),
		GFP_KERNEL);
		if (!rmi_smb)
		return -ENOMEM;

		if (!pdata) {
		dev_err(&client->dev, "no platform data, aborting\n");
		return -ENOMEM;
		}

		rmi_dbg(RMI_DEBUG_XPORT, &client->dev, "Probing %s.\n",
		dev_name(&client->dev));

		rmi_smb->client = client;
		mutex_init(&rmi_smb->page_mutex);
		mutex_init(&rmi_smb->mappingtable_mutex);

		rmi_smb->xport.dev = &client->dev;
		rmi_smb->xport.pdata = *pdata;
		rmi_smb->xport.pdata.irq = client->irq;
		rmi_smb->xport.proto_name = "smb2";
		rmi_smb->xport.ops = &rmi_smb_ops;

		retval = rmi_smb_get_version(rmi_smb);
		if (retval < 0)
		return retval;

		smbus_version = retval;
		rmi_dbg(RMI_DEBUG_XPORT, &client->dev, "Smbus version is %d",
		smbus_version);

		if (smbus_version != 2) {
		dev_err(&client->dev, "Unrecognized SMB version %d.\n",
		smbus_version);
		return -ENODEV;
		}

		i2c_set_clientdata(client, rmi_smb);

		retval = rmi_register_transport_device(&rmi_smb->xport);
		if (retval) {
		dev_err(&client->dev, "Failed to register transport driver at 0x%.2X.\n",
		client->addr);
		i2c_set_clientdata(client, NULL);
		return retval;
		}

		dev_info(&client->dev, "registered rmi smb driver at %#04x.\n",
		client->addr);
		return 0;

		}

		static int rmi_smb_remove(struct i2c_client *client)
		{
		struct rmi_smb_xport *rmi_smb = i2c_get_clientdata(client);

		rmi_unregister_transport_device(&rmi_smb->xport);

		return 0;
		}

		static int __maybe_unused rmi_smb_suspend(struct device *dev)
		{
		struct i2c_client *client = to_i2c_client(dev);
		struct rmi_smb_xport *rmi_smb = i2c_get_clientdata(client);
		int ret;

		ret = rmi_driver_suspend(rmi_smb->xport.rmi_dev, true);
		if (ret)
		dev_warn(dev, "Failed to suspend device: %d\n", ret);

		return ret;
		}

		static int __maybe_unused rmi_smb_runtime_suspend(struct device *dev)
		{
		struct i2c_client *client = to_i2c_client(dev);
		struct rmi_smb_xport *rmi_smb = i2c_get_clientdata(client);
		int ret;

		ret = rmi_driver_suspend(rmi_smb->xport.rmi_dev, false);
		if (ret)
		dev_warn(dev, "Failed to suspend device: %d\n", ret);

		return ret;
		}

		static int __maybe_unused rmi_smb_resume(struct device *dev)
		{
		struct i2c_client *client = container_of(dev, struct i2c_client, dev);
		struct rmi_smb_xport *rmi_smb = i2c_get_clientdata(client);
		struct rmi_device *rmi_dev = rmi_smb->xport.rmi_dev;
		int ret;

		rmi_smb_reset(&rmi_smb->xport, 0);

		rmi_reset(rmi_dev);

		ret = rmi_driver_resume(rmi_smb->xport.rmi_dev, true);
		if (ret)
		dev_warn(dev, "Failed to resume device: %d\n", ret);

		return 0;
		}

		static int __maybe_unused rmi_smb_runtime_resume(struct device *dev)
		{
		struct i2c_client *client = to_i2c_client(dev);
		struct rmi_smb_xport *rmi_smb = i2c_get_clientdata(client);
		int ret;

		ret = rmi_driver_resume(rmi_smb->xport.rmi_dev, false);
		if (ret)
		dev_warn(dev, "Failed to resume device: %d\n", ret);

		return 0;
		}

		static const struct dev_pm_ops rmi_smb_pm = {
		SET_SYSTEM_SLEEP_PM_OPS(rmi_smb_suspend, rmi_smb_resume)
		SET_RUNTIME_PM_OPS(rmi_smb_runtime_suspend, rmi_smb_runtime_resume,
		NULL)
		};

		static const struct i2c_device_id rmi_id[] = {
		{ "rmi4_smbus", 0 },
		{ }
		};
		MODULE_DEVICE_TABLE(i2c, rmi_id);

		static struct i2c_driver rmi_smb_driver = {
		.driver = {
		.name = "rmi4_smbus",
		.pm = &rmi_smb_pm,
		},
		.id_table = rmi_id,
		.probe = rmi_smb_probe,
		.remove = rmi_smb_remove,
		};

		module_i2c_driver(rmi_smb_driver);

		MODULE_AUTHOR("Andrew Duggan <aduggan@synaptics.com>");
		MODULE_AUTHOR("Benjamin Tissoires <benjamin.tissoires@redhat.com>");
		MODULE_DESCRIPTION("RMI4 SMBus driver");
		MODULE_LICENSE("GPL");

Admin message