Commit 820970a5 authored by Vineet Gupta's avatar Vineet Gupta
Browse files

ARCv2: [intc] HS38 core interrupt controller 



Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: default avatarVineet Gupta <vgupta@synopsys.com>
parent 10d11e58

Documentation/devicetree/bindings/arc/archs-intc.txt

0 → 100644
+22 −0
Original line number Diff line number Diff line 
* ARC-HS incore Interrupt Controller (Provided by cores implementing ARCv2 ISA)



Properties:



- compatible: "snps,archs-intc"

- interrupt-controller: This is an interrupt controller.

- #interrupt-cells: Must be <1>.



  Single Cell "interrupts" property of a device specifies the IRQ number

  between 16 to 256



  intc accessed via the special ARC AUX register interface, hence "reg" property

  is not specified.



Example:



	intc: interrupt-controller {

		compatible = "snps,archs-intc";

		interrupt-controller;

		#interrupt-cells = <1>;

		interrupts = <16 17 18 19 20 21 22 23 24 25>;

	};

arch/arc/include/asm/arcregs.h

+1 −0
Original line number Diff line number Diff line
@@ -31,6 +31,7 @@ 
#define ARC_REG_BPU_BCR		0xc0

#define ARC_REG_ISA_CFG_BCR	0xc1

#define ARC_REG_RTT_BCR		0xF2

#define ARC_REG_IRQ_BCR		0xF3

#define ARC_REG_SMART_BCR	0xFF



/* status32 Bits Positions */

arch/arc/include/asm/irqflags-arcv2.h

0 → 100644
+116 −0
Original line number Diff line number Diff line 
/*

 * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

 */



#ifndef __ASM_IRQFLAGS_ARCV2_H

#define __ASM_IRQFLAGS_ARCV2_H



#include <asm/arcregs.h>



/* status32 Bits */

#define STATUS_AD_BIT	19   /* Disable Align chk: core supports non-aligned */

#define STATUS_IE_BIT	31



#define STATUS_AD_MASK		(1<<STATUS_AD_BIT)

#define STATUS_IE_MASK		(1<<STATUS_IE_BIT)



#define AUX_USER_SP		0x00D

#define AUX_IRQ_CTRL		0x00E

#define AUX_IRQ_ACT		0x043	/* Active Intr across all levels */

#define AUX_IRQ_LVL_PEND	0x200	/* Pending Intr across all levels */

#define AUX_IRQ_PRIORITY	0x206

#define ICAUSE			0x40a

#define AUX_IRQ_SELECT		0x40b

#define AUX_IRQ_ENABLE		0x40c



/* 0 is highest level, but taken by FIRQs, if present in design */

#define ARCV2_IRQ_DEF_PRIO		0



/* seed value for status register */

#define ISA_INIT_STATUS_BITS	(STATUS_IE_MASK | STATUS_AD_MASK | \

					(ARCV2_IRQ_DEF_PRIO << 1))



#ifndef __ASSEMBLY__



/*

 * Save IRQ state and disable IRQs

 */

static inline long arch_local_irq_save(void)

{

	unsigned long flags;



	__asm__ __volatile__("	clri %0	\n" : "=r" (flags) : : "memory");



	return flags;

}



/*

 * restore saved IRQ state

 */

static inline void arch_local_irq_restore(unsigned long flags)

{

	__asm__ __volatile__("	seti %0	\n" : : "r" (flags) : "memory");

}



/*

 * Unconditionally Enable IRQs

 */

static inline void arch_local_irq_enable(void)

{

	__asm__ __volatile__("	seti	\n" : : : "memory");

}



/*

 * Unconditionally Disable IRQs

 */

static inline void arch_local_irq_disable(void)

{

	__asm__ __volatile__("	clri	\n" : : : "memory");

}



/*

 * save IRQ state

 */

static inline long arch_local_save_flags(void)

{

	unsigned long temp;



	__asm__ __volatile__(

	"	lr  %0, [status32]	\n"

	: "=&r"(temp)

	:

	: "memory");



	return temp;

}



/*

 * Query IRQ state

 */

static inline int arch_irqs_disabled_flags(unsigned long flags)

{

	return !(flags & (STATUS_IE_MASK));

}



static inline int arch_irqs_disabled(void)

{

	return arch_irqs_disabled_flags(arch_local_save_flags());

}



#else



.macro IRQ_DISABLE  scratch

	clri

.endm



.macro IRQ_ENABLE  scratch

	seti

.endm



#endif	/* __ASSEMBLY__ */



#endif

arch/arc/kernel/intc-arcv2.c

0 → 100644
+143 −0
Original line number Diff line number Diff line 
/*

 * Copyright (C) 2014 Synopsys, Inc. (www.synopsys.com)

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

 *

 */



#include <linux/interrupt.h>

#include <linux/module.h>

#include <linux/of.h>

#include <linux/irqdomain.h>

#include <linux/irqchip.h>

#include "../../drivers/irqchip/irqchip.h"

#include <asm/irq.h>



/*

 * Early Hardware specific Interrupt setup

 * -Called very early (start_kernel -> setup_arch -> setup_processor)

 * -Platform Independent (must for any ARC Core)

 * -Needed for each CPU (hence not foldable into init_IRQ)

 */

void arc_init_IRQ(void)

{

	unsigned int tmp;



	struct aux_irq_ctrl {

#ifdef CONFIG_CPU_BIG_ENDIAN

		unsigned int res3:18, save_idx_regs:1, res2:1,

			     save_u_to_u:1, save_lp_regs:1, save_blink:1,

			     res:4, save_nr_gpr_pairs:5;

#else

		unsigned int save_nr_gpr_pairs:5, res:4,

			     save_blink:1, save_lp_regs:1, save_u_to_u:1,

			     res2:1, save_idx_regs:1, res3:18;

#endif

	} ictrl;



	*(unsigned int *)&ictrl = 0;



	ictrl.save_nr_gpr_pairs = 6;	/* r0 to r11 (r12 saved manually) */

	ictrl.save_blink = 1;

	ictrl.save_lp_regs = 1;		/* LP_COUNT, LP_START, LP_END */

	ictrl.save_u_to_u = 0;		/* user ctxt saved on kernel stack */

	ictrl.save_idx_regs = 1;	/* JLI, LDI, EI */



	WRITE_AUX(AUX_IRQ_CTRL, ictrl);



	/* setup status32, don't enable intr yet as kernel doesn't want */

	tmp = read_aux_reg(0xa);

	tmp |= ISA_INIT_STATUS_BITS;

	tmp &= ~STATUS_IE_MASK;

	asm volatile("flag %0	\n"::"r"(tmp));



	/*

	 * ARCv2 core intc provides multiple interrupt priorities (upto 16).

	 * Typical builds though have only two levels (0-high, 1-low)

	 * Linux by default uses lower prio 1 for most irqs, reserving 0 for

	 * NMI style interrupts in future (say perf)

	 *

	 * Read the intc BCR to confirm that Linux default priority is avail

	 * in h/w

	 *

	 * Note:

	 *  IRQ_BCR[27..24] contains N-1 (for N priority levels) and prio level

	 *  is 0 based.

	 */

	tmp = (read_aux_reg(ARC_REG_IRQ_BCR) >> 24 ) & 0xF;

	if (ARCV2_IRQ_DEF_PRIO > tmp)

		panic("Linux default irq prio incorrect\n");

}



static void arcv2_irq_mask(struct irq_data *data)

{

	write_aux_reg(AUX_IRQ_SELECT, data->irq);

	write_aux_reg(AUX_IRQ_ENABLE, 0);

}



static void arcv2_irq_unmask(struct irq_data *data)

{

	write_aux_reg(AUX_IRQ_SELECT, data->irq);

	write_aux_reg(AUX_IRQ_ENABLE, 1);

}



void arcv2_irq_enable(struct irq_data *data)

{

	/* set default priority */

	write_aux_reg(AUX_IRQ_SELECT, data->irq);

	write_aux_reg(AUX_IRQ_PRIORITY, ARCV2_IRQ_DEF_PRIO);



	/*

	 * hw auto enables (linux unmask) all by default

	 * So no need to do IRQ_ENABLE here

	 * XXX: However OSCI LAN need it

	 */

	write_aux_reg(AUX_IRQ_ENABLE, 1);

}



static struct irq_chip arcv2_irq_chip = {

	.name           = "ARCv2 core Intc",

	.irq_mask	= arcv2_irq_mask,

	.irq_unmask	= arcv2_irq_unmask,

	.irq_enable	= arcv2_irq_enable

};



static int arcv2_irq_map(struct irq_domain *d, unsigned int irq,

			 irq_hw_number_t hw)

{

	if (irq == TIMER0_IRQ)

		irq_set_chip_and_handler(irq, &arcv2_irq_chip, handle_percpu_irq);

	else

		irq_set_chip_and_handler(irq, &arcv2_irq_chip, handle_level_irq);



	return 0;

}



static const struct irq_domain_ops arcv2_irq_ops = {

	.xlate = irq_domain_xlate_onecell,

	.map = arcv2_irq_map,

};



static struct irq_domain *root_domain;



static int __init

init_onchip_IRQ(struct device_node *intc, struct device_node *parent)

{

	if (parent)

		panic("DeviceTree incore intc not a root irq controller\n");



	root_domain = irq_domain_add_legacy(intc, NR_CPU_IRQS, 0, 0,

					    &arcv2_irq_ops, NULL);



	if (!root_domain)

		panic("root irq domain not avail\n");



	/* with this we don't need to export root_domain */

	irq_set_default_host(root_domain);



	return 0;

}



IRQCHIP_DECLARE(arc_intc, "snps,archs-intc", init_onchip_IRQ);

CRA Git | Maintained and supported by SUSTech CRA and CCSE