Commit 806f80a6 authored by Bartlomiej Zolnierkiewicz's avatar Bartlomiej Zolnierkiewicz
Browse files

ide: add generic ATA/ATAPI disk driver 



* Add struct ide_disk_ops containing protocol specific methods.

* Add 'struct ide_disk_ops *' to ide_drive_t.

* Convert ide-{disk,floppy} drivers to use struct ide_disk_ops.

* Merge ide-{disk,floppy} drivers into generic ide-gd driver.

While at it:
- ide_disk_init_capacity() -> ide_disk_get_capacity()

Acked-by: default avatarBorislav Petkov <petkovbb@gmail.com>
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
parent 79cb3803

drivers/ide/Kconfig

+30 −34
Original line number Diff line number Diff line
@@ -84,21 +84,40 @@ config BLK_DEV_IDE_SATA 


	  If unsure, say N.



config BLK_DEV_IDEDISK

	tristate "Include IDE/ATA-2 DISK support"

	---help---

	  This will include enhanced support for MFM/RLL/IDE hard disks.  If

	  you have a MFM/RLL/IDE disk, and there is no special reason to use

	  the old hard disk driver instead, say Y.  If you have an SCSI-only

	  system, you can say N here.

config IDE_GD

	tristate "generic ATA/ATAPI disk support"

	default y

	help

	  Support for ATA/ATAPI disks (including ATAPI floppy drives).



	  To compile this driver as a module, choose M here: the

	  module will be called ide-disk.

	  Do not compile this driver as a module if your root file system

	  (the one containing the directory /) is located on the IDE disk.

	  To compile this driver as a module, choose M here.

	  The module will be called ide-gd_mod.



	  If unsure, say Y.



config IDE_GD_ATA

	bool "ATA disk support"

	depends on IDE_GD

	default y

	help

	  This will include support for ATA hard disks.



	  If unsure, say Y.



config IDE_GD_ATAPI

	bool "ATAPI floppy support"

	depends on IDE_GD

	select IDE_ATAPI

	help

	  This will include support for ATAPI floppy drives

	  (i.e. Iomega ZIP or MKE LS-120).



	  For information about jumper settings and the question

	  of when a ZIP drive uses a partition table, see

	  <http://www.win.tue.nl/~aeb/linux/zip/zip-1.html>.



	  If unsure, say N.



config BLK_DEV_IDECS

	tristate "PCMCIA IDE support"

	depends on PCMCIA
@@ -163,29 +182,6 @@ config BLK_DEV_IDETAPE 
	  To compile this driver as a module, choose M here: the

	  module will be called ide-tape.



config BLK_DEV_IDEFLOPPY

	tristate "Include IDE/ATAPI FLOPPY support"

	select IDE_ATAPI

	---help---

	  If you have an IDE floppy drive which uses the ATAPI protocol,

	  answer Y.  ATAPI is a newer protocol used by IDE CD-ROM/tape/floppy

	  drives, similar to the SCSI protocol.



	  The LS-120 and the IDE/ATAPI Iomega ZIP drive are also supported by

	  this driver. For information about jumper settings and the question

	  of when a ZIP drive uses a partition table, see

	  <http://www.win.tue.nl/~aeb/linux/zip/zip-1.html>.

	  (ATAPI PD-CD/CDR drives are not supported by this driver; support

	  for PD-CD/CDR drives is available if you answer Y to

	  "SCSI emulation support", below).



	  If you say Y here, the FLOPPY drive will be identified along with

	  other IDE devices, as "hdb" or "hdc", or something similar (check

	  the boot messages with dmesg).



	  To compile this driver as a module, choose M here: the

	  module will be called ide-floppy.



config BLK_DEV_IDESCSI

	tristate "SCSI emulation support (DEPRECATED)"

	depends on SCSI

drivers/ide/Makefile

+13 −6
Original line number Diff line number Diff line
@@ -37,18 +37,25 @@ obj-$(CONFIG_IDE_H8300) += h8300/ 
obj-$(CONFIG_IDE_GENERIC)		+= ide-generic.o

obj-$(CONFIG_BLK_DEV_IDEPNP)		+= ide-pnp.o



ide-disk_mod-y += ide-gd.o ide-disk.o ide-disk_ioctl.o

ide-gd_mod-y += ide-gd.o

ide-cd_mod-y += ide-cd.o ide-cd_ioctl.o ide-cd_verbose.o

ide-floppy_mod-y += ide-gd-floppy.o ide-floppy.o ide-floppy_ioctl.o



ifeq ($(CONFIG_IDE_GD_ATA), y)

	ide-gd_mod-y += ide-disk.o ide-disk_ioctl.o

ifeq ($(CONFIG_IDE_PROC_FS), y)

	ide-disk_mod-y += ide-disk_proc.o

	ide-floppy_mod-y += ide-floppy_proc.o

	ide-gd_mod-y += ide-disk_proc.o

endif

endif



ifeq ($(CONFIG_IDE_GD_ATAPI), y)

	ide-gd_mod-y += ide-floppy.o ide-floppy_ioctl.o

ifeq ($(CONFIG_IDE_PROC_FS), y)

	ide-gd_mod-y += ide-floppy_proc.o

endif

endif



obj-$(CONFIG_BLK_DEV_IDEDISK)		+= ide-disk_mod.o

obj-$(CONFIG_IDE_GD)			+= ide-gd_mod.o

obj-$(CONFIG_BLK_DEV_IDECD)		+= ide-cd_mod.o

obj-$(CONFIG_BLK_DEV_IDEFLOPPY)		+= ide-floppy_mod.o

obj-$(CONFIG_BLK_DEV_IDETAPE)		+= ide-tape.o



ifeq ($(CONFIG_BLK_DEV_IDECS), y)

drivers/ide/ide-disk.c

+32 −7
Original line number Diff line number Diff line
@@ -184,7 +184,7 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, 
 * 1073741822 == 549756 MB or 48bit addressing fake drive

 */



ide_startstop_t ide_do_rw_disk(ide_drive_t *drive, struct request *rq,

static ide_startstop_t ide_do_rw_disk(ide_drive_t *drive, struct request *rq,

				      sector_t block)

{

	ide_hwif_t *hwif = HWIF(drive);
@@ -333,7 +333,7 @@ static void idedisk_check_hpa(ide_drive_t *drive) 
	}

}



void ide_disk_init_capacity(ide_drive_t *drive)

static int ide_disk_get_capacity(ide_drive_t *drive)

{

	u16 *id = drive->id;

	int lba;
@@ -382,6 +382,8 @@ void ide_disk_init_capacity(ide_drive_t *drive) 
		} else

			drive->dev_flags &= ~IDE_DFLAG_LBA48;

	}



	return 0;

}



static void idedisk_prepare_flush(struct request_queue *q, struct request *rq)
@@ -590,7 +592,12 @@ ide_ext_devset_rw(wcache, wcache); 


ide_ext_devset_rw_sync(nowerr, nowerr);



void ide_disk_setup(ide_drive_t *drive)

static int ide_disk_check(ide_drive_t *drive, const char *s)

{

	return 1;

}



static void ide_disk_setup(ide_drive_t *drive)

{

	struct ide_disk_obj *idkp = drive->driver_data;

	ide_hwif_t *hwif = drive->hwif;
@@ -626,7 +633,7 @@ void ide_disk_setup(ide_drive_t *drive) 
			 drive->queue->max_sectors / 2);



	/* calculate drive capacity, and select LBA if possible */

	ide_disk_init_capacity(drive);

	ide_disk_get_capacity(drive);



	/*

	 * if possible, give fdisk access to more of the drive,
@@ -682,7 +689,7 @@ void ide_disk_setup(ide_drive_t *drive) 
		drive->dev_flags |= IDE_DFLAG_ATTACH;

}



void ide_disk_flush(ide_drive_t *drive)

static void ide_disk_flush(ide_drive_t *drive)

{

	if (ata_id_flush_enabled(drive->id) == 0 ||

	    (drive->dev_flags & IDE_DFLAG_WCACHE) == 0)
@@ -692,7 +699,13 @@ void ide_disk_flush(ide_drive_t *drive) 
		printk(KERN_INFO "%s: wcache flush failed!\n", drive->name);

}



int ide_disk_set_doorlock(ide_drive_t *drive, int on)

static int ide_disk_init_media(ide_drive_t *drive, struct gendisk *disk)

{

	return 0;

}



static int ide_disk_set_doorlock(ide_drive_t *drive, struct gendisk *disk,

				 int on)

{

	ide_task_t task;

	int ret;
@@ -711,3 +724,15 @@ int ide_disk_set_doorlock(ide_drive_t *drive, int on) 


	return ret;

}



const struct ide_disk_ops ide_ata_disk_ops = {

	.check		= ide_disk_check,

	.get_capacity	= ide_disk_get_capacity,

	.setup		= ide_disk_setup,

	.flush		= ide_disk_flush,

	.init_media	= ide_disk_init_media,

	.set_doorlock	= ide_disk_set_doorlock,

	.do_request	= ide_do_rw_disk,

	.end_request	= ide_end_request,

	.ioctl		= ide_disk_ioctl,

};

drivers/ide/ide-disk.h

+9 −15
Original line number Diff line number Diff line 
#ifndef __IDE_DISK_H

#define __IDE_DISK_H



struct ide_disk_obj {

	ide_drive_t	*drive;

	ide_driver_t	*driver;

	struct gendisk	*disk;

	struct kref	kref;

	unsigned int	openers;	/* protected by BKL for now */

};



sector_t ide_gd_capacity(ide_drive_t *);

#include "ide-gd.h"



#ifdef CONFIG_IDE_GD_ATA

/* ide-disk.c */

void ide_disk_init_capacity(ide_drive_t *);

void ide_disk_setup(ide_drive_t *);

void ide_disk_flush(ide_drive_t *);

int ide_disk_set_doorlock(ide_drive_t *, int);

ide_startstop_t ide_do_rw_disk(ide_drive_t *, struct request *, sector_t);

extern const struct ide_disk_ops ide_ata_disk_ops;

ide_decl_devset(address);

ide_decl_devset(multcount);

ide_decl_devset(nowerr);
@@ -24,12 +13,17 @@ ide_decl_devset(wcache); 
ide_decl_devset(acoustic);



/* ide-disk_ioctl.c */

int ide_disk_ioctl(struct inode *, struct file *, unsigned int, unsigned long);

int ide_disk_ioctl(ide_drive_t *, struct inode *, struct file *, unsigned int,

		   unsigned long);



#ifdef CONFIG_IDE_PROC_FS

/* ide-disk_proc.c */

extern ide_proc_entry_t ide_disk_proc[];

extern const struct ide_proc_devset ide_disk_settings[];

#endif

#else

#define ide_disk_proc		NULL

#define ide_disk_settings	NULL

#endif



#endif /* __IDE_DISK_H */

drivers/ide/ide-disk_ioctl.c

+1 −3
Original line number Diff line number Diff line
@@ -13,12 +13,10 @@ static const struct ide_ioctl_devset ide_disk_ioctl_settings[] = { 
{ 0 }

};



int ide_disk_ioctl(struct inode *inode, struct file *file,

int ide_disk_ioctl(ide_drive_t *drive, struct inode *inode, struct file *file,

		   unsigned int cmd, unsigned long arg)

{

	struct block_device *bdev = inode->i_bdev;

	struct ide_disk_obj *idkp = ide_drv_g(bdev->bd_disk, ide_disk_obj);

	ide_drive_t *drive = idkp->drive;

	int err;



	err = ide_setting_ioctl(drive, bdev, cmd, arg, ide_disk_ioctl_settings);

CRA Git | Maintained and supported by SUSTech CRA and CCSE