[ARM] Kirkwood: Marvell OpenRD-Base board support (7eeae54c) · Commits · 戴 / test

arch/arm/mach-kirkwood/Kconfig

+6 −0

Original line number	Diff line number	Diff line
		@@ -38,6 +38,12 @@ config MACH_TS219
		Say 'Y' here if you want your kernel to support the
		QNAP TS-119 and TS-219 Turbo NAS devices.

		config MACH_OPENRD_BASE
		bool "Marvell OpenRD Base Board"
		help
		Say 'Y' here if you want your kernel to support the
		Marvell OpenRD Base Board.

		endmenu

		endif

arch/arm/mach-kirkwood/Makefile

+1 −0

Original line number	Diff line number	Diff line
		@@ -6,5 +6,6 @@ obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
		obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o
		obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o
		obj-$(CONFIG_MACH_TS219) += ts219-setup.o
		obj-$(CONFIG_MACH_OPENRD_BASE) += openrd_base-setup.o

		obj-$(CONFIG_CPU_IDLE) += cpuidle.o

arch/arm/mach-kirkwood/openrd_base-setup.c

0 → 100644

+78 −0

Original line number	Diff line number	Diff line
		/*
		* arch/arm/mach-kirkwood/openrd_base-setup.c
		*
		* Marvell OpenRD Base Board Setup
		*
		* This file is licensed under the terms of the GNU General Public
		* License version 2. This program is licensed "as is" without any
		* warranty of any kind, whether express or implied.
		*/

		#include <linux/kernel.h>
		#include <linux/init.h>
		#include <linux/platform_device.h>
		#include <linux/mtd/partitions.h>
		#include <linux/mv643xx_eth.h>
		#include <asm/mach-types.h>
		#include <asm/mach/arch.h>
		#include <mach/kirkwood.h>
		#include <plat/mvsdio.h>
		#include "common.h"
		#include "mpp.h"

		static struct mtd_partition openrd_base_nand_parts[] = {
		{
		.name = "u-boot",
		.offset = 0,
		.size = SZ_1M
		}, {
		.name = "uImage",
		.offset = MTDPART_OFS_NXTBLK,
		.size = SZ_4M
		}, {
		.name = "root",
		.offset = MTDPART_OFS_NXTBLK,
		.size = MTDPART_SIZ_FULL
		},
		};

		static struct mv643xx_eth_platform_data openrd_base_ge00_data = {
		.phy_addr = MV643XX_ETH_PHY_ADDR(8),
		};

		static struct mvsdio_platform_data openrd_base_mvsdio_data = {
		.gpio_card_detect = 29, /* MPP29 used as SD card detect */
		};

		static unsigned int openrd_base_mpp_config[] __initdata = {
		MPP29_GPIO,
		0
		};

		static void __init openrd_base_init(void)
		{
		/*
		* Basic setup. Needs to be called early.
		*/
		kirkwood_init();
		kirkwood_mpp_conf(openrd_base_mpp_config);

		kirkwood_uart0_init();
		kirkwood_nand_init(ARRAY_AND_SIZE(openrd_base_nand_parts), 25);

		kirkwood_ehci_init();

		kirkwood_ge00_init(&openrd_base_ge00_data);
		kirkwood_sdio_init(&openrd_base_mvsdio_data);
		}

		MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
		/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
		.phys_io = KIRKWOOD_REGS_PHYS_BASE,
		.io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
		.boot_params = 0x00000100,
		.init_machine = openrd_base_init,
		.map_io = kirkwood_map_io,
		.init_irq = kirkwood_init_irq,
		.timer = &kirkwood_timer,
		MACHINE_END

Admin message