Merge tag 'stm32-dt-for-v5.10-fixes-2' of... (7e47a750) · Commits · 戴 / test

Merge tag 'stm32-dt-for-v5.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/fixes STM32 DT fixes for v5.10, round 2 Highlights: ----------- -Fixes are for DHCOM/DHCOR boards: - Fix TA3-GPIO-C button - Fix LED5 mapping - Define VIO regulator supply on DHCOM - Enable thermal sensor support on stm32mp15xx-dhcor - Keep VDDA LDO1 always on to avoid leakage * tag 'stm32-dt-for-v5.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: Keep VDDA LDO1 always on on DHCOM ARM: dts: stm32: Enable thermal sensor support on stm32mp15xx-dhcor ARM: dts: stm32: Define VIO regulator supply on DHCOM ARM: dts: stm32: Fix LED5 on STM32MP1 DHCOM PDK2 ARM: dts: stm32: Fix TA3-GPIO-C key on STM32MP1 DHCOM PDK2 Link: https://lore.kernel.org/r/65bfc73d-aae1-5309-2e11-1e3da647ad46@st.com Signed-off-by:

Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi

+11 −8

Original line number	Diff line number	Diff line
		@@ -46,6 +46,16 @@
		linux,code = <KEY_A>;
		gpios = <&gpiof 3 GPIO_ACTIVE_LOW>;
		};

		/*
		* The EXTi IRQ line 0 is shared with PMIC,
		* so mark this as polled GPIO key.
		*/
		button-2 {
		label = "TA3-GPIO-C";
		linux,code = <KEY_C>;
		gpios = <&gpiog 0 GPIO_ACTIVE_LOW>;
		};
		};

		gpio-keys {
		@@ -59,13 +69,6 @@
		wakeup-source;
		};

		button-2 {
		label = "TA3-GPIO-C";
		linux,code = <KEY_C>;
		gpios = <&gpioi 11 GPIO_ACTIVE_LOW>;
		wakeup-source;
		};

		button-3 {
		label = "TA4-GPIO-D";
		linux,code = <KEY_D>;
		@@ -79,7 +82,7 @@

		led-0 {
		label = "green:led5";
		gpios = <&gpiog 2 GPIO_ACTIVE_HIGH>;
		gpios = <&gpioc 6 GPIO_ACTIVE_HIGH>;
		default-state = "off";
		};

arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi

+2 −0

Original line number	Diff line number	Diff line
		@@ -68,6 +68,7 @@
		gpio = <&gpiog 3 GPIO_ACTIVE_LOW>;
		regulator-always-on;
		regulator-boot-on;
		vin-supply = <&vdd>;
		};
		};

		@@ -202,6 +203,7 @@

		vdda: ldo1 {
		regulator-name = "vdda";
		regulator-always-on;
		regulator-min-microvolt = <2900000>;
		regulator-max-microvolt = <2900000>;
		interrupts = <IT_CURLIM_LDO1 0>;

arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi

+4 −0

Original line number	Diff line number	Diff line
		@@ -21,6 +21,10 @@
		};
		};

		&dts {
		status = "okay";
		};

		&i2c4 {
		pinctrl-names = "default";
		pinctrl-0 = <&i2c4_pins_a>;

Admin message