drivers/net/can/cc770/cc770_isa.c
0 → 100644
+337
−0
Loading
Gitlab 现已全面支持 git over ssh 与 git over https。通过 HTTPS 访问请配置带有 read_repository / write_repository 权限的 Personal access token。通过 SSH 端口访问请使用 22 端口或 13389 端口。如果使用CAS注册了账户但不知道密码,可以自行至设置中更改;如有其他问题,请发邮件至 service@cra.moe 寻求协助。
This patch adds support for legacy Bosch CC770 and Intel AN82527 CAN controllers on the ISA or PC-104 bus. The I/O port or memory address and the IRQ number must be specified via module parameters: insmod cc770_isa.ko port=0x310,0x380 irq=7,11 for ISA devices using I/O ports or: insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 for memory mapped ISA devices. Indirect access via address and data port is supported as well: insmod cc770_isa.ko port=0x310,0x380 indirect=1 irq=7,11 Furthermore, the following mode parameter can be defined: clk: External oscillator clock frequency (default=16000000 [16 MHz]) cir: CPU interface register (default=0x40 [CPU_DSC]) ocr, Bus configuration register (default=0x00) cor, Clockout register (default=0x00) Note: for clk, cir, bcr and cor, the first argument re-defines the default for all other devices, e.g.: insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000 is equivalent to insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000,24000000 Signed-off-by:Wolfgang Grandegger <wg@grandegger.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
CRA Git | Maintained and supported by SUSTech CRA and CCSE