Commit 7da493e9 authored by Padmavathi Venna's avatar Padmavathi Venna Committed by Mark Brown
Browse files

ASoC: Samsung: I2S: Add quirks as driver data in I2S 



Samsung has different versions of I2S introduced in different
platforms. Each version has some new support added for multichannel,
secondary fifo, s/w reset control and internal mux for rclk src clk.
Each newly added change has a quirk. So this patch adds all the
required quirks as driver data and based on compatible string from
dtsi fetches the quirks.

Signed-off-by: default avatarPadmavathi Venna <padma.v@samsung.com>
Reviewed-by: default avatarTomasz Figa <t.figa@samsung.com>
Signed-off-by: default avatarMark Brown <broonie@linaro.org>
parent 2f6f0ffb

Documentation/devicetree/bindings/sound/samsung-i2s.txt

+6 −12
Original line number Diff line number Diff line
@@ -2,7 +2,11 @@ 


Required SoC Specific Properties:



- compatible : "samsung,i2s-v5"

- compatible : should be one of the following.

   - samsung,s3c6410-i2s: for 8/16/24bit stereo I2S.

   - samsung,s5pv210-i2s: for 8/16/24bit multichannel(5.1) I2S with

     secondary fifo, s/w reset control and internal mux for root clk src.



- reg: physical base address of the controller and length of memory mapped

  region.

- dmas: list of DMA controller phandle and DMA request line ordered pairs.
@@ -21,13 +25,6 @@ Required SoC Specific Properties: 


Optional SoC Specific Properties:



- samsung,supports-6ch: If the I2S Primary sound source has 5.1 Channel

  support, this flag is enabled.

- samsung,supports-rstclr: This flag should be set if I2S software reset bit

  control is required. When this flag is set I2S software reset bit will be

  enabled or disabled based on need.

- samsung,supports-secdai:If I2S block has a secondary FIFO and internal DMA,

  then this flag is enabled.

- samsung,idma-addr: Internal DMA register base address of the audio

  sub system(used in secondary sound source).

- pinctrl-0: Should specify pin control groups used for this controller.
@@ -36,7 +33,7 @@ Optional SoC Specific Properties: 
Example:



i2s0: i2s@03830000 {

	compatible = "samsung,i2s-v5";

	compatible = "samsung,s5pv210-i2s";

	reg = <0x03830000 0x100>;

	dmas = <&pdma0 10

		&pdma0 9
@@ -46,9 +43,6 @@ i2s0: i2s@03830000 { 
		<&clock_audss EXYNOS_I2S_BUS>,

		<&clock_audss EXYNOS_SCLK_I2S>;

	clock-names = "iis", "i2s_opclk0", "i2s_opclk1";

	samsung,supports-6ch;

	samsung,supports-rstclr;

	samsung,supports-secdai;

	samsung,idma-addr = <0x03000000>;

	pinctrl-names = "default";

	pinctrl-0 = <&i2s0_bus>;

sound/soc/samsung/i2s.c

+36 −26
Original line number Diff line number Diff line
@@ -40,6 +40,7 @@ enum samsung_dai_type { 


struct samsung_i2s_dai_data {

	int dai_type;

	u32 quirks;

};



struct i2s_dai {
@@ -1032,18 +1033,18 @@ static struct i2s_dai *i2s_alloc_dai(struct platform_device *pdev, bool sec) 


static const struct of_device_id exynos_i2s_match[];



static inline int samsung_i2s_get_driver_data(struct platform_device *pdev)

static inline const struct samsung_i2s_dai_data *samsung_i2s_get_driver_data(

						struct platform_device *pdev)

{

#ifdef CONFIG_OF

	struct samsung_i2s_dai_data *data;

	if (pdev->dev.of_node) {

		const struct of_device_id *match;

		match = of_match_node(exynos_i2s_match, pdev->dev.of_node);

		data = (struct samsung_i2s_dai_data *) match->data;

		return data->dai_type;

		return match->data;

	} else

#endif

		return platform_get_device_id(pdev)->driver_data;

		return (struct samsung_i2s_dai_data *)

				platform_get_device_id(pdev)->driver_data;

}



#ifdef CONFIG_PM_RUNTIME
@@ -1074,13 +1075,13 @@ static int samsung_i2s_probe(struct platform_device *pdev) 
	struct resource *res;

	u32 regs_base, quirks = 0, idma_addr = 0;

	struct device_node *np = pdev->dev.of_node;

	enum samsung_dai_type samsung_dai_type;

	const struct samsung_i2s_dai_data *i2s_dai_data;

	int ret = 0;



	/* Call during Seconday interface registration */

	samsung_dai_type = samsung_i2s_get_driver_data(pdev);

	i2s_dai_data = samsung_i2s_get_driver_data(pdev);



	if (samsung_dai_type == TYPE_SEC) {

	if (i2s_dai_data->dai_type == TYPE_SEC) {

		sec_dai = dev_get_drvdata(&pdev->dev);

		if (!sec_dai) {

			dev_err(&pdev->dev, "Unable to get drvdata\n");
@@ -1129,15 +1130,7 @@ static int samsung_i2s_probe(struct platform_device *pdev) 
			idma_addr = i2s_cfg->idma_addr;

		}

	} else {

		if (of_find_property(np, "samsung,supports-6ch", NULL))

			quirks |= QUIRK_PRI_6CHAN;



		if (of_find_property(np, "samsung,supports-secdai", NULL))

			quirks |= QUIRK_SEC_DAI;



		if (of_find_property(np, "samsung,supports-rstclr", NULL))

			quirks |= QUIRK_NEED_RSTCLR;



		quirks = i2s_dai_data->quirks;

		if (of_property_read_u32(np, "samsung,idma-addr",

					 &idma_addr)) {

			if (quirks & QUIRK_SEC_DAI) {
@@ -1250,27 +1243,44 @@ static int samsung_i2s_remove(struct platform_device *pdev) 
	return 0;

}



static const struct samsung_i2s_dai_data i2sv3_dai_type = {

	.dai_type = TYPE_PRI,

	.quirks = QUIRK_NO_MUXPSR,

};



static const struct samsung_i2s_dai_data i2sv5_dai_type = {

	.dai_type = TYPE_PRI,

	.quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI | QUIRK_NEED_RSTCLR,

};



static const struct samsung_i2s_dai_data samsung_dai_type_pri = {

	.dai_type = TYPE_PRI,

};



static const struct samsung_i2s_dai_data samsung_dai_type_sec = {

	.dai_type = TYPE_SEC,

};



static struct platform_device_id samsung_i2s_driver_ids[] = {

	{

		.name           = "samsung-i2s",

		.driver_data	= TYPE_PRI,

		.driver_data    = (kernel_ulong_t)&samsung_dai_type_pri,

	}, {

		.name           = "samsung-i2s-sec",

		.driver_data	= TYPE_SEC,

		.driver_data    = (kernel_ulong_t)&samsung_dai_type_sec,

	},

	{},

};

MODULE_DEVICE_TABLE(platform, samsung_i2s_driver_ids);



#ifdef CONFIG_OF

static struct samsung_i2s_dai_data samsung_i2s_dai_data_array[] = {

	[TYPE_PRI] = { TYPE_PRI },

	[TYPE_SEC] = { TYPE_SEC },

};



static const struct of_device_id exynos_i2s_match[] = {

	{ .compatible = "samsung,i2s-v5",

	  .data = &samsung_i2s_dai_data_array[TYPE_PRI],

	{

		.compatible = "samsung,s3c6410-i2s",

		.data = &i2sv3_dai_type,

	}, {

		.compatible = "samsung,s5pv210-i2s",

		.data = &i2sv5_dai_type,

	},

	{},

};

CRA Git | Maintained and supported by SUSTech CRA and CCSE