Commit 7ce75bb2 authored by Lina Iyer's avatar Lina Iyer Committed by Kumar Gala
Browse files

ARM: qcom: Add Subsystem Power Manager (SPM) driver 

SPM is a hardware block that controls the peripheral logic surrounding
the application cores (cpu/l$). When the core executes WFI instruction,
the SPM takes over the putting the core in low power state as
configured. The wake up for the SPM is an interrupt at the GIC, which
then completes the rest of low power mode sequence and brings the core
out of low power mode.

The SPM has a set of control registers that configure the SPMs
individually based on the type of the core and the runtime conditions.
SPM is a finite state machine block to which a sequence is provided and
it interprets the bytes and executes them in sequence. Each low power
mode that the core can enter into is provided to the SPM as a sequence.

Configure the SPM to set the core (cpu or L2) into its low power mode,
the index of the first command in the sequence is set in the SPM_CTL
register. When the core executes ARM wfi instruction, it triggers the
SPM state machine to start executing from that index. The SPM state
machine waits until the interrupt occurs and starts executing the rest
of the sequence until it hits the end of the sequence. The end of the
sequence jumps the core out of its low power mode.

Add support for an idle driver to set up the SPM to place the core in
Standby or Standalone power collapse mode when the core is idle.

Based on work by: Mahesh Sivasubramanian <msivasub@codeaurora.org>,
Ai Li <ali@codeaurora.org>, Praveen Chidambaram <pchidamb@codeaurora.org>
Original tree available at -
git://codeaurora.org/quic/la/kernel/msm-3.10.git



Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: default avatarLina Iyer <lina.iyer@linaro.org>
Reviewed-by: default avatarStephen Boyd <sboyd@codeaurora.org>
Tested-by: default avatarKevin Hilman <khilman@linaro.org>
Acked-by: default avatarKumar Gala <galak@codeaurora.org>
Acked-by: default avatarKevin Hilman <khilman@linaro.org>
Signed-off-by: default avatarKumar Gala <galak@codeaurora.org>
parent b787f68c

drivers/soc/qcom/Kconfig

+7 −0
Original line number Diff line number Diff line
@@ -10,3 +10,10 @@ config QCOM_GSBI 
          functions for connecting the underlying serial UART, SPI, and I2C

          devices to the output pins.



config QCOM_PM

	bool "Qualcomm Power Management"

	depends on ARCH_QCOM && !ARM64

	help

	  QCOM Platform specific power driver to manage cores and L2 low power

	  modes. It interface with various system drivers to put the cores in

	  low power modes.

drivers/soc/qcom/Makefile

+1 −0
Original line number Diff line number Diff line 
obj-$(CONFIG_QCOM_GSBI)	+=	qcom_gsbi.o

obj-$(CONFIG_QCOM_PM)	+=	spm.o

drivers/soc/qcom/spm.c

0 → 100644
+385 −0
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2011-2014, The Linux Foundation. All rights reserved.

 * Copyright (c) 2014,2015, Linaro Ltd.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



#include <linux/module.h>

#include <linux/kernel.h>

#include <linux/init.h>

#include <linux/io.h>

#include <linux/slab.h>

#include <linux/of.h>

#include <linux/of_address.h>

#include <linux/of_device.h>

#include <linux/err.h>

#include <linux/platform_device.h>

#include <linux/cpuidle.h>

#include <linux/cpu_pm.h>

#include <linux/qcom_scm.h>



#include <asm/cpuidle.h>

#include <asm/proc-fns.h>

#include <asm/suspend.h>



#define MAX_PMIC_DATA		2

#define MAX_SEQ_DATA		64

#define SPM_CTL_INDEX		0x7f

#define SPM_CTL_INDEX_SHIFT	4

#define SPM_CTL_EN		BIT(0)



enum pm_sleep_mode {

	PM_SLEEP_MODE_STBY,

	PM_SLEEP_MODE_RET,

	PM_SLEEP_MODE_SPC,

	PM_SLEEP_MODE_PC,

	PM_SLEEP_MODE_NR,

};



enum spm_reg {

	SPM_REG_CFG,

	SPM_REG_SPM_CTL,

	SPM_REG_DLY,

	SPM_REG_PMIC_DLY,

	SPM_REG_PMIC_DATA_0,

	SPM_REG_PMIC_DATA_1,

	SPM_REG_VCTL,

	SPM_REG_SEQ_ENTRY,

	SPM_REG_SPM_STS,

	SPM_REG_PMIC_STS,

	SPM_REG_NR,

};



struct spm_reg_data {

	const u8 *reg_offset;

	u32 spm_cfg;

	u32 spm_dly;

	u32 pmic_dly;

	u32 pmic_data[MAX_PMIC_DATA];

	u8 seq[MAX_SEQ_DATA];

	u8 start_index[PM_SLEEP_MODE_NR];

};



struct spm_driver_data {

	void __iomem *reg_base;

	const struct spm_reg_data *reg_data;

};



static const u8 spm_reg_offset_v2_1[SPM_REG_NR] = {

	[SPM_REG_CFG]		= 0x08,

	[SPM_REG_SPM_CTL]	= 0x30,

	[SPM_REG_DLY]		= 0x34,

	[SPM_REG_SEQ_ENTRY]	= 0x80,

};



/* SPM register data for 8974, 8084 */

static const struct spm_reg_data spm_reg_8974_8084_cpu  = {

	.reg_offset = spm_reg_offset_v2_1,

	.spm_cfg = 0x1,

	.spm_dly = 0x3C102800,

	.seq = { 0x03, 0x0B, 0x0F, 0x00, 0x20, 0x80, 0x10, 0xE8, 0x5B, 0x03,

		0x3B, 0xE8, 0x5B, 0x82, 0x10, 0x0B, 0x30, 0x06, 0x26, 0x30,

		0x0F },

	.start_index[PM_SLEEP_MODE_STBY] = 0,

	.start_index[PM_SLEEP_MODE_SPC] = 3,

};



static const u8 spm_reg_offset_v1_1[SPM_REG_NR] = {

	[SPM_REG_CFG]		= 0x08,

	[SPM_REG_SPM_CTL]	= 0x20,

	[SPM_REG_PMIC_DLY]	= 0x24,

	[SPM_REG_PMIC_DATA_0]	= 0x28,

	[SPM_REG_PMIC_DATA_1]	= 0x2C,

	[SPM_REG_SEQ_ENTRY]	= 0x80,

};



/* SPM register data for 8064 */

static const struct spm_reg_data spm_reg_8064_cpu = {

	.reg_offset = spm_reg_offset_v1_1,

	.spm_cfg = 0x1F,

	.pmic_dly = 0x02020004,

	.pmic_data[0] = 0x0084009C,

	.pmic_data[1] = 0x00A4001C,

	.seq = { 0x03, 0x0F, 0x00, 0x24, 0x54, 0x10, 0x09, 0x03, 0x01,

		0x10, 0x54, 0x30, 0x0C, 0x24, 0x30, 0x0F },

	.start_index[PM_SLEEP_MODE_STBY] = 0,

	.start_index[PM_SLEEP_MODE_SPC] = 2,

};



static DEFINE_PER_CPU(struct spm_driver_data *, cpu_spm_drv);



typedef int (*idle_fn)(int);

static DEFINE_PER_CPU(idle_fn*, qcom_idle_ops);



static inline void spm_register_write(struct spm_driver_data *drv,

					enum spm_reg reg, u32 val)

{

	if (drv->reg_data->reg_offset[reg])

		writel_relaxed(val, drv->reg_base +

				drv->reg_data->reg_offset[reg]);

}



/* Ensure a guaranteed write, before return */

static inline void spm_register_write_sync(struct spm_driver_data *drv,

					enum spm_reg reg, u32 val)

{

	u32 ret;



	if (!drv->reg_data->reg_offset[reg])

		return;



	do {

		writel_relaxed(val, drv->reg_base +

				drv->reg_data->reg_offset[reg]);

		ret = readl_relaxed(drv->reg_base +

				drv->reg_data->reg_offset[reg]);

		if (ret == val)

			break;

		cpu_relax();

	} while (1);

}



static inline u32 spm_register_read(struct spm_driver_data *drv,

					enum spm_reg reg)

{

	return readl_relaxed(drv->reg_base + drv->reg_data->reg_offset[reg]);

}



static void spm_set_low_power_mode(struct spm_driver_data *drv,

					enum pm_sleep_mode mode)

{

	u32 start_index;

	u32 ctl_val;



	start_index = drv->reg_data->start_index[mode];



	ctl_val = spm_register_read(drv, SPM_REG_SPM_CTL);

	ctl_val &= ~(SPM_CTL_INDEX << SPM_CTL_INDEX_SHIFT);

	ctl_val |= start_index << SPM_CTL_INDEX_SHIFT;

	ctl_val |= SPM_CTL_EN;

	spm_register_write_sync(drv, SPM_REG_SPM_CTL, ctl_val);

}



static int qcom_pm_collapse(unsigned long int unused)

{

	qcom_scm_cpu_power_down(QCOM_SCM_CPU_PWR_DOWN_L2_ON);



	/*

	 * Returns here only if there was a pending interrupt and we did not

	 * power down as a result.

	 */

	return -1;

}



static int qcom_cpu_spc(int cpu)

{

	int ret;

	struct spm_driver_data *drv = per_cpu(cpu_spm_drv, cpu);



	spm_set_low_power_mode(drv, PM_SLEEP_MODE_SPC);

	ret = cpu_suspend(0, qcom_pm_collapse);

	/*

	 * ARM common code executes WFI without calling into our driver and

	 * if the SPM mode is not reset, then we may accidently power down the

	 * cpu when we intended only to gate the cpu clock.

	 * Ensure the state is set to standby before returning.

	 */

	spm_set_low_power_mode(drv, PM_SLEEP_MODE_STBY);



	return ret;

}



static int qcom_idle_enter(int cpu, unsigned long index)

{

	return per_cpu(qcom_idle_ops, cpu)[index](cpu);

}



static const struct of_device_id qcom_idle_state_match[] __initconst = {

	{ .compatible = "qcom,idle-state-spc", .data = qcom_cpu_spc },

	{ },

};



static int __init qcom_cpuidle_init(struct device_node *cpu_node, int cpu)

{

	const struct of_device_id *match_id;

	struct device_node *state_node;

	int i;

	int state_count = 1;

	idle_fn idle_fns[CPUIDLE_STATE_MAX];

	idle_fn *fns;

	cpumask_t mask;

	bool use_scm_power_down = false;



	for (i = 0; ; i++) {

		state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i);

		if (!state_node)

			break;



		if (!of_device_is_available(state_node))

			continue;



		if (i == CPUIDLE_STATE_MAX) {

			pr_warn("%s: cpuidle states reached max possible\n",

					__func__);

			break;

		}



		match_id = of_match_node(qcom_idle_state_match, state_node);

		if (!match_id)

			return -ENODEV;



		idle_fns[state_count] = match_id->data;



		/* Check if any of the states allow power down */

		if (match_id->data == qcom_cpu_spc)

			use_scm_power_down = true;



		state_count++;

	}



	if (state_count == 1)

		goto check_spm;



	fns = devm_kcalloc(get_cpu_device(cpu), state_count, sizeof(*fns),

			GFP_KERNEL);

	if (!fns)

		return -ENOMEM;



	for (i = 1; i < state_count; i++)

		fns[i] = idle_fns[i];



	if (use_scm_power_down) {

		/* We have atleast one power down mode */

		cpumask_clear(&mask);

		cpumask_set_cpu(cpu, &mask);

		qcom_scm_set_warm_boot_addr(cpu_resume, &mask);

	}



	per_cpu(qcom_idle_ops, cpu) = fns;



	/*

	 * SPM probe for the cpu should have happened by now, if the

	 * SPM device does not exist, return -ENXIO to indicate that the

	 * cpu does not support idle states.

	 */

check_spm:

	return per_cpu(cpu_spm_drv, cpu) ? 0 : -ENXIO;

}



static struct cpuidle_ops qcom_cpuidle_ops __initdata = {

	.suspend = qcom_idle_enter,

	.init = qcom_cpuidle_init,

};



CPUIDLE_METHOD_OF_DECLARE(qcom_idle_v1, "qcom,kpss-acc-v1", &qcom_cpuidle_ops);

CPUIDLE_METHOD_OF_DECLARE(qcom_idle_v2, "qcom,kpss-acc-v2", &qcom_cpuidle_ops);



static struct spm_driver_data *spm_get_drv(struct platform_device *pdev,

		int *spm_cpu)

{

	struct spm_driver_data *drv = NULL;

	struct device_node *cpu_node, *saw_node;

	int cpu;

	bool found;



	for_each_possible_cpu(cpu) {

		cpu_node = of_cpu_device_node_get(cpu);

		if (!cpu_node)

			continue;

		saw_node = of_parse_phandle(cpu_node, "qcom,saw", 0);

		found = (saw_node == pdev->dev.of_node);

		of_node_put(saw_node);

		of_node_put(cpu_node);

		if (found)

			break;

	}



	if (found) {

		drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL);

		if (drv)

			*spm_cpu = cpu;

	}



	return drv;

}



static const struct of_device_id spm_match_table[] = {

	{ .compatible = "qcom,msm8974-saw2-v2.1-cpu",

	  .data = &spm_reg_8974_8084_cpu },

	{ .compatible = "qcom,apq8084-saw2-v2.1-cpu",

	  .data = &spm_reg_8974_8084_cpu },

	{ .compatible = "qcom,apq8064-saw2-v1.1-cpu",

	  .data = &spm_reg_8064_cpu },

	{ },

};



static int spm_dev_probe(struct platform_device *pdev)

{

	struct spm_driver_data *drv;

	struct resource *res;

	const struct of_device_id *match_id;

	void __iomem *addr;

	int cpu;



	drv = spm_get_drv(pdev, &cpu);

	if (!drv)

		return -EINVAL;



	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);

	drv->reg_base = devm_ioremap_resource(&pdev->dev, res);

	if (IS_ERR(drv->reg_base))

		return PTR_ERR(drv->reg_base);



	match_id = of_match_node(spm_match_table, pdev->dev.of_node);

	if (!match_id)

		return -ENODEV;



	drv->reg_data = match_id->data;



	/* Write the SPM sequences first.. */

	addr = drv->reg_base + drv->reg_data->reg_offset[SPM_REG_SEQ_ENTRY];

	__iowrite32_copy(addr, drv->reg_data->seq,

			ARRAY_SIZE(drv->reg_data->seq) / 4);



	/*

	 * ..and then the control registers.

	 * On some SoC if the control registers are written first and if the

	 * CPU was held in reset, the reset signal could trigger the SPM state

	 * machine, before the sequences are completely written.

	 */

	spm_register_write(drv, SPM_REG_CFG, drv->reg_data->spm_cfg);

	spm_register_write(drv, SPM_REG_DLY, drv->reg_data->spm_dly);

	spm_register_write(drv, SPM_REG_PMIC_DLY, drv->reg_data->pmic_dly);

	spm_register_write(drv, SPM_REG_PMIC_DATA_0,

				drv->reg_data->pmic_data[0]);

	spm_register_write(drv, SPM_REG_PMIC_DATA_1,

				drv->reg_data->pmic_data[1]);



	/* Set up Standby as the default low power mode */

	spm_set_low_power_mode(drv, PM_SLEEP_MODE_STBY);



	per_cpu(cpu_spm_drv, cpu) = drv;



	return 0;

}



static struct platform_driver spm_driver = {

	.probe = spm_dev_probe,

	.driver = {

		.name = "saw",

		.of_match_table = spm_match_table,

	},

};

module_platform_driver(spm_driver);



MODULE_LICENSE("GPL v2");

MODULE_DESCRIPTION("SAW power controller driver");

MODULE_ALIAS("platform:saw");

CRA Git | Maintained and supported by SUSTech CRA and CCSE