Commit 7ca33c7a authored by Takashi Iwai's avatar Takashi Iwai
Browse files

Merge tag 'asoc-v3.15-rc5-drivers' of... 

Merge tag 'asoc-v3.15-rc5-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Driver fixes for v3.15

A small set of driver fixes, nothing remarkable in itself or of any
relevance outside of the driver.
parents 927cdab3 f9a40596

sound/soc/codecs/tlv320aic31xx.c

+1 −1
Original line number Diff line number Diff line
@@ -376,7 +376,7 @@ static int aic31xx_dapm_power_event(struct snd_soc_dapm_widget *w, 
		reg = AIC31XX_ADCFLAG;

		break;

	default:

		dev_err(w->codec->dev, "Unknown widget '%s' calling %s/n",

		dev_err(w->codec->dev, "Unknown widget '%s' calling %s\n",

			w->name, __func__);

		return -EINVAL;

	}

sound/soc/codecs/wm8962.c

+12 −3
Original line number Diff line number Diff line
@@ -154,6 +154,7 @@ static struct reg_default wm8962_reg[] = { 
	{ 40, 0x0000 },   /* R40    - SPKOUTL volume */

	{ 41, 0x0000 },   /* R41    - SPKOUTR volume */



	{ 49, 0x0010 },   /* R49    - Class D Control 1 */

	{ 51, 0x0003 },   /* R51    - Class D Control 2 */



	{ 56, 0x0506 },   /* R56    - Clocking 4 */
@@ -795,7 +796,6 @@ static bool wm8962_volatile_register(struct device *dev, unsigned int reg) 
	case WM8962_ALC2:

	case WM8962_THERMAL_SHUTDOWN_STATUS:

	case WM8962_ADDITIONAL_CONTROL_4:

	case WM8962_CLASS_D_CONTROL_1:

	case WM8962_DC_SERVO_6:

	case WM8962_INTERRUPT_STATUS_1:

	case WM8962_INTERRUPT_STATUS_2:
@@ -2929,13 +2929,22 @@ static int wm8962_set_fll(struct snd_soc_codec *codec, int fll_id, int source, 
static int wm8962_mute(struct snd_soc_dai *dai, int mute)

{

	struct snd_soc_codec *codec = dai->codec;

	int val;

	int val, ret;



	if (mute)

		val = WM8962_DAC_MUTE;

		val = WM8962_DAC_MUTE | WM8962_DAC_MUTE_ALT;

	else

		val = 0;



	/**

	 * The DAC mute bit is mirrored in two registers, update both to keep

	 * the register cache consistent.

	 */

	ret = snd_soc_update_bits(codec, WM8962_CLASS_D_CONTROL_1,

				  WM8962_DAC_MUTE_ALT, val);

	if (ret < 0)

		return ret;



	return snd_soc_update_bits(codec, WM8962_ADC_DAC_CONTROL_1,

				   WM8962_DAC_MUTE, val);

}

sound/soc/codecs/wm8962.h

+4 −0
Original line number Diff line number Diff line
@@ -1954,6 +1954,10 @@ 
#define WM8962_SPKOUTL_ENA_MASK                 0x0040  /* SPKOUTL_ENA */

#define WM8962_SPKOUTL_ENA_SHIFT                     6  /* SPKOUTL_ENA */

#define WM8962_SPKOUTL_ENA_WIDTH                     1  /* SPKOUTL_ENA */

#define WM8962_DAC_MUTE_ALT                     0x0010  /* DAC_MUTE */

#define WM8962_DAC_MUTE_ALT_MASK                0x0010  /* DAC_MUTE */

#define WM8962_DAC_MUTE_ALT_SHIFT                    4  /* DAC_MUTE */

#define WM8962_DAC_MUTE_ALT_WIDTH                    1  /* DAC_MUTE */

#define WM8962_SPKOUTL_PGA_MUTE                 0x0002  /* SPKOUTL_PGA_MUTE */

#define WM8962_SPKOUTL_PGA_MUTE_MASK            0x0002  /* SPKOUTL_PGA_MUTE */

#define WM8962_SPKOUTL_PGA_MUTE_SHIFT                1  /* SPKOUTL_PGA_MUTE */

sound/soc/fsl/fsl_esai.c

+14 −8
Original line number Diff line number Diff line
@@ -258,10 +258,16 @@ static int fsl_esai_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id, 
		return -EINVAL;

	}



	if (ratio == 1) {

	/* Only EXTAL source can be output directly without using PSR and PM */

	if (ratio == 1 && clksrc == esai_priv->extalclk) {

		/* Bypass all the dividers if not being needed */

		ecr |= tx ? ESAI_ECR_ETO : ESAI_ECR_ERO;

		goto out;

	} else if (ratio < 2) {

		/* The ratio should be no less than 2 if using other sources */

		dev_err(dai->dev, "failed to derive required HCK%c rate\n",

				tx ? 'T' : 'R');

		return -EINVAL;

	}



	ret = fsl_esai_divisor_cal(dai, tx, ratio, false, 0);
@@ -307,7 +313,8 @@ static int fsl_esai_set_bclk(struct snd_soc_dai *dai, bool tx, u32 freq) 
		return -EINVAL;

	}



	if (esai_priv->sck_div[tx] && (ratio > 16 || ratio == 0)) {

	/* The ratio should be contented by FP alone if bypassing PM and PSR */

	if (!esai_priv->sck_div[tx] && (ratio > 16 || ratio == 0)) {

		dev_err(dai->dev, "the ratio is out of range (1 ~ 16)\n");

		return -EINVAL;

	}
@@ -454,12 +461,6 @@ static int fsl_esai_startup(struct snd_pcm_substream *substream, 
	}



	if (!dai->active) {

		/* Reset Port C */

		regmap_update_bits(esai_priv->regmap, REG_ESAI_PRRC,

				   ESAI_PRRC_PDC_MASK, ESAI_PRRC_PDC(ESAI_GPIO));

		regmap_update_bits(esai_priv->regmap, REG_ESAI_PCRC,

				   ESAI_PCRC_PC_MASK, ESAI_PCRC_PC(ESAI_GPIO));



		/* Set synchronous mode */

		regmap_update_bits(esai_priv->regmap, REG_ESAI_SAICR,

				   ESAI_SAICR_SYNC, esai_priv->synchronous ?
@@ -519,6 +520,11 @@ static int fsl_esai_hw_params(struct snd_pcm_substream *substream, 


	regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx), mask, val);



	/* Remove ESAI personal reset by configuring ESAI_PCRC and ESAI_PRRC */

	regmap_update_bits(esai_priv->regmap, REG_ESAI_PRRC,

			   ESAI_PRRC_PDC_MASK, ESAI_PRRC_PDC(ESAI_GPIO));

	regmap_update_bits(esai_priv->regmap, REG_ESAI_PCRC,

			   ESAI_PCRC_PC_MASK, ESAI_PCRC_PC(ESAI_GPIO));

	return 0;

}

sound/soc/fsl/imx-audmux.c

+1 −1
Original line number Diff line number Diff line
@@ -145,7 +145,7 @@ static const struct file_operations audmux_debugfs_fops = { 
	.llseek = default_llseek,

};



static void __init audmux_debugfs_init(void)

static void audmux_debugfs_init(void)

{

	int i;

	char buf[20];

CRA Git | Maintained and supported by SUSTech CRA and CCSE