Commit 796211b7 authored by Ludovic Desroches's avatar Ludovic Desroches Committed by Chris Ball
Browse files

mmc: atmel-mci: add pdc support and runtime capabilities detection 



Add pdc support for atmel-mci. It makes at91-mci driver useless because it
was only used for the old atmel MCI core which has pdc but no dma support.
To allow removing at91-mci, the capabilities of the MCI core are detected
at runtime -- then the driver will use pio, pdc or dma transfers.
Warning: at91rm9200 is not supported, to support it we need to use swab32
on data but I have no board to test it.

Signed-off-by: default avatarLudovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: default avatarChris Ball <cjb@laptop.org>
parent b9867f37

drivers/mmc/host/atmel-mci-regs.h

+14 −0
Original line number Diff line number Diff line
@@ -88,8 +88,14 @@ 
# define ATMCI_BLKE			(  1 <<   3)	/* Data Block Ended */

# define ATMCI_DTIP			(  1 <<   4)	/* Data Transfer In Progress */

# define ATMCI_NOTBUSY			(  1 <<   5)	/* Data Not Busy */

# define ATMCI_ENDRX			(  1 <<   6)    /* End of RX Buffer */

# define ATMCI_ENDTX			(  1 <<   7)    /* End of TX Buffer */

# define ATMCI_SDIOIRQA			(  1 <<   8)	/* SDIO IRQ in slot A */

# define ATMCI_SDIOIRQB			(  1 <<   9)	/* SDIO IRQ in slot B */

# define ATMCI_SDIOWAIT			(  1 <<  12)    /* SDIO Read Wait Operation Status */

# define ATMCI_CSRCV			(  1 <<  13)    /* CE-ATA Completion Signal Received */

# define ATMCI_RXBUFF			(  1 <<  14)    /* RX Buffer Full */

# define ATMCI_TXBUFE			(  1 <<  15)    /* TX Buffer Empty */

# define ATMCI_RINDE			(  1 <<  16)	/* Response Index Error */

# define ATMCI_RDIRE			(  1 <<  17)	/* Response Direction Error */

# define ATMCI_RCRCE			(  1 <<  18)	/* Response CRC Error */
@@ -97,6 +103,13 @@ 
# define ATMCI_RTOE			(  1 <<  20)	/* Response Time-Out Error */

# define ATMCI_DCRCE			(  1 <<  21)	/* Data CRC Error */

# define ATMCI_DTOE			(  1 <<  22)	/* Data Time-Out Error */

# define ATMCI_CSTOE			(  1 <<  23)    /* Completion Signal Time-out Error */

# define ATMCI_BLKOVRE			(  1 <<  24)    /* DMA Block Overrun Error */

# define ATMCI_DMADONE			(  1 <<  25)    /* DMA Transfer Done */

# define ATMCI_FIFOEMPTY		(  1 <<  26)    /* FIFO Empty Flag */

# define ATMCI_XFRDONE			(  1 <<  27)    /* Transfer Done Flag */

# define ATMCI_ACKRCV			(  1 <<  28)    /* Boot Operation Acknowledge Received */

# define ATMCI_ACKRCVE			(  1 <<  29)    /* Boot Operation Acknowledge Error */

# define ATMCI_OVRE			(  1 <<  30)	/* RX Overrun Error */

# define ATMCI_UNRE			(  1 <<  31)	/* TX Underrun Error */

#define ATMCI_DMA			0x0050	/* DMA Configuration[2] */
@@ -114,6 +127,7 @@ 
#define ATMCI_WPSR			0x00e8	/* Write Protection Status[2] */

# define ATMCI_GET_WP_VS(x)		((x) & 0x0f)

# define ATMCI_GET_WP_VSRC(x)		(((x) >> 8) & 0xffff)

#define ATMCI_VERSION			0x00FC  /* Version */

#define ATMCI_FIFO_APERTURE		0x0200	/* FIFO Aperture[2] */



/* This is not including the FIFO Aperture on MCI2 */

drivers/mmc/host/atmel-mci.c

+409 −118

File changed.

Preview size limit exceeded, changes collapsed.

CRA Git | Maintained and supported by SUSTech CRA and CCSE