Merge NX gzip support into next

    syscall64-abi

    transactional_memory

    ultravisor

    vas-api

.. only::  subproject and html

.. SPDX-License-Identifier: GPL-2.0

.. _VAS-API:

===================================================

Virtual Accelerator Switchboard (VAS) userspace API

===================================================

Introduction

============

Power9 processor introduced Virtual Accelerator Switchboard (VAS) which

allows both userspace and kernel communicate to co-processor

(hardware accelerator) referred to as the Nest Accelerator (NX). The NX

unit comprises of one or more hardware engines or co-processor types

such as 842 compression, GZIP compression and encryption. On power9,

userspace applications will have access to only GZIP Compression engine

which supports ZLIB and GZIP compression algorithms in the hardware.

To communicate with NX, kernel has to establish a channel or window and

then requests can be submitted directly without kernel involvement.

Requests to the GZIP engine must be formatted as a co-processor Request

Block (CRB) and these CRBs must be submitted to the NX using COPY/PASTE

instructions to paste the CRB to hardware address that is associated with

the engine's request queue.

The GZIP engine provides two priority levels of requests: Normal and

High. Only Normal requests are supported from userspace right now.

This document explains userspace API that is used to interact with

kernel to setup channel / window which can be used to send compression

requests directly to NX accelerator.

Overview

========

Application access to the GZIP engine is provided through

/dev/crypto/nx-gzip device node implemented by the VAS/NX device driver.

An application must open the /dev/crypto/nx-gzip device to obtain a file

descriptor (fd). Then should issue VAS_TX_WIN_OPEN ioctl with this fd to

establish connection to the engine. It means send window is opened on GZIP

engine for this process. Once a connection is established, the application

should use the mmap() system call to map the hardware address of engine's

request queue into the application's virtual address space.

The application can then submit one or more requests to the the engine by

using copy/paste instructions and pasting the CRBs to the virtual address

(aka paste_address) returned by mmap(). User space can close the

established connection or send window by closing the file descriptior

(close(fd)) or upon the process exit.

Note that applications can send several requests with the same window or

can establish multiple windows, but one window for each file descriptor.

Following sections provide additional details and references about the

individual steps.

NX-GZIP Device Node

===================

There is one /dev/crypto/nx-gzip node in the system and it provides

access to all GZIP engines in the system. The only valid operations on

/dev/crypto/nx-gzip are:

	* open() the device for read and write.

	* issue VAS_TX_WIN_OPEN ioctl

	* mmap() the engine's request queue into application's virtual

	  address space (i.e. get a paste_address for the co-processor

	  engine).

	* close the device node.

Other file operations on this device node are undefined.

Note that the copy and paste operations go directly to the hardware and

do not go through this device. Refer COPY/PASTE document for more

details.

Although a system may have several instances of the NX co-processor

engines (typically, one per P9 chip) there is just one

/dev/crypto/nx-gzip device node in the system. When the nx-gzip device

node is opened, Kernel opens send window on a suitable instance of NX

accelerator. It finds CPU on which the user process is executing and

determine the NX instance for the corresponding chip on which this CPU

belongs.

Applications may chose a specific instance of the NX co-processor using

the vas_id field in the VAS_TX_WIN_OPEN ioctl as detailed below.

A userspace library libnxz is available here but still in development:

	 https://github.com/abalib/power-gzip

Applications that use inflate / deflate calls can link with libnxz

instead of libz and use NX GZIP compression without any modification.

Open /dev/crypto/nx-gzip

========================

The nx-gzip device should be opened for read and write. No special

privileges are needed to open the device. Each window corresponds to one

file descriptor. So if the userspace process needs multiple windows,

several open calls have to be issued.

See open(2) system call man pages for other details such as return values,

error codes and restrictions.

VAS_TX_WIN_OPEN ioctl

=====================

Applications should use the VAS_TX_WIN_OPEN ioctl as follows to establish

a connection with NX co-processor engine:

	::

		struct vas_tx_win_open_attr {

			__u32   version;

			__s16   vas_id; /* specific instance of vas or -1

						for default */

			__u16   reserved1;

			__u64   flags;	/* For future use */

			__u64   reserved2[6];

		};

	version: The version field must be currently set to 1.

	vas_id: If '-1' is passed, kernel will make a best-effort attempt

		to assign an optimal instance of NX for the process. To

		select the specific VAS instance, refer

		"Discovery of available VAS engines" section below.

	flags, reserved1 and reserved2[6] fields are for future extension

	and must be set to 0.

	The attributes attr for the VAS_TX_WIN_OPEN ioctl are defined as

	follows:

		#define VAS_MAGIC 'v'

		#define VAS_TX_WIN_OPEN _IOW(VAS_MAGIC, 1,

						struct vas_tx_win_open_attr)

		struct vas_tx_win_open_attr attr;

		rc = ioctl(fd, VAS_TX_WIN_OPEN, &attr);

	The VAS_TX_WIN_OPEN ioctl returns 0 on success. On errors, it

	returns -1 and sets the errno variable to indicate the error.

	Error conditions:

		EINVAL	fd does not refer to a valid VAS device.

		EINVAL	Invalid vas ID

		EINVAL	version is not set with proper value

		EEXIST	Window is already opened for the given fd

		ENOMEM	Memory is not available to allocate window

		ENOSPC	System has too many active windows (connections)

			opened

		EINVAL	reserved fields are not set to 0.

	See the ioctl(2) man page for more details, error codes and

	restrictions.

mmap() NX-GZIP device

=====================

The mmap() system call for a NX-GZIP device fd returns a paste_address

that the application can use to copy/paste its CRB to the hardware engines.

	::

		paste_addr = mmap(addr, size, prot, flags, fd, offset);

	Only restrictions on mmap for a NX-GZIP device fd are:

		* size should be PAGE_SIZE

		* offset parameter should be 0ULL

	Refer to mmap(2) man page for additional details/restrictions.

	In addition to the error conditions listed on the mmap(2) man

	page, can also fail with one of the following error codes:

		EINVAL	fd is not associated with an open window

			(i.e mmap() does not follow a successful call

			to the VAS_TX_WIN_OPEN ioctl).

		EINVAL	offset field is not 0ULL.

Discovery of available VAS engines

==================================

Each available VAS instance in the system will have a device tree node

like /proc/device-tree/vas@* or /proc/device-tree/xscom@*/vas@*.

Determine the chip or VAS instance and use the corresponding ibm,vas-id

property value in this node to select specific VAS instance.

Copy/Paste operations

=====================

Applications should use the copy and paste instructions to send CRB to NX.

Refer section 4.4 in PowerISA for Copy/Paste instructions:

https://openpowerfoundation.org/?resource_lib=power-isa-version-3-0

CRB Specification and use NX

============================

Applications should format requests to the co-processor using the

co-processor Request Block (CRBs). Refer NX-GZIP user's manual for the format

of CRB and use NX from userspace such as sending requests and checking

request status.

NX Fault handling

=================

Applications send requests to NX and wait for the status by polling on

co-processor Status Block (CSB) flags. NX updates status in CSB after each

request is processed. Refer NX-GZIP user's manual for the format of CSB and

status flags.

In case if NX encounters translation error (called NX page fault) on CSB

address or any request buffer, raises an interrupt on the CPU to handle the

fault. Page fault can happen if an application passes invalid addresses or

request buffers are not in memory. The operating system handles the fault by

updating CSB with the following data:

	csb.flags = CSB_V;

	csb.cc = CSB_CC_TRANSLATION;

	csb.ce = CSB_CE_TERMINATION;

	csb.address = fault_address;

When an application receives translation error, it can touch or access

the page that has a fault address so that this page will be in memory. Then

the application can resend this request to NX.

If the OS can not update CSB due to invalid CSB address, sends SEGV signal

to the process who opened the send window on which the original request was

issued. This signal returns with the following siginfo struct:

	siginfo.si_signo = SIGSEGV;

	siginfo.si_errno = EFAULT;

	siginfo.si_code = SEGV_MAPERR;

	siginfo.si_addr = CSB adress;

In the case of multi-thread applications, NX send windows can be shared

across all threads. For example, a child thread can open a send window,

but other threads can send requests to NX using this window. These

requests will be successful even in the case of OS handling faults as long

as CSB address is valid. If the NX request contains an invalid CSB address,

the signal will be sent to the child thread that opened the window. But if

the thread is exited without closing the window and the request is issued

using this window. the signal will be issued to the thread group leader

(tgid). It is up to the application whether to ignore or handle these

signals.

NX-GZIP User's Manual:

https://github.com/libnxz/power-gzip/blob/master/power_nx_gzip_um.pdf

Simple example

==============

	::

		int use_nx_gzip()

		{

			int rc, fd;

			void *addr;

			struct vas_setup_attr txattr;

			fd = open("/dev/crypto/nx-gzip", O_RDWR);

			if (fd < 0) {

				fprintf(stderr, "open nx-gzip failed\n");

				return -1;

			}

			memset(&txattr, 0, sizeof(txattr));

			txattr.version = 1;

			txattr.vas_id = -1

			rc = ioctl(fd, VAS_TX_WIN_OPEN,

					(unsigned long)&txattr);

			if (rc < 0) {

				fprintf(stderr, "ioctl() n %d, error %d\n",

						rc, errno);

				return rc;

			}

			addr = mmap(NULL, 4096, PROT_READ|PROT_WRITE,

					MAP_SHARED, fd, 0ULL);

			if (addr == MAP_FAILED) {

				fprintf(stderr, "mmap() failed, errno %d\n",

						errno);

				return -errno;

			}

			do {

				//Format CRB request with compression or

				//uncompression

				// Refer tests for vas_copy/vas_paste

				vas_copy((&crb, 0, 1);

				vas_paste(addr, 0, 1);

				// Poll on csb.flags with timeout

				// csb address is listed in CRB

			} while (true)

			close(fd) or window can be closed upon process exit

		}

	Refer https://github.com/abalib/power-gzip for tests or more

	use cases.

'v'   00-1F  linux/fs.h                                              conflict!

'v'   00-0F  linux/sonypi.h                                          conflict!

'v'   00-0F  media/v4l2-subdev.h                                     conflict!

'v'   20-27  arch/powerpc/include/uapi/asm/vas-api.h		     VAS API

'v'   C0-FF  linux/meye.h                                            conflict!

'w'   all                                                            CERN SCI driver

'y'   00-1F                                                          packet based user level communications

	int wcreds_max;

	int lpid;

	int pidr;		/* hardware PID (from SPRN_PID) */

	int pid;		/* linux process id */

	int pswid;

	int rsvd_txbuf_count;

	int tc_mode;

 */

int vas_paste_crb(struct vas_window *win, int offset, bool re);

/*

 * Register / unregister coprocessor type to VAS API which will be exported

 * to user space. Applications can use this API to open / close window

 * which can be used to send / receive requests directly to cooprcessor.

 *

 * Only NX GZIP coprocessor type is supported now, but this API can be

 * used for others in future.

 */

int vas_register_coproc_api(struct module *mod, enum vas_cop_type cop_type,

				const char *name);

void vas_unregister_coproc_api(void);

#endif /* __ASM_POWERPC_VAS_H */

/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */

/*

 * Copyright 2019 IBM Corp.

 */

#ifndef _UAPI_MISC_VAS_H

#define _UAPI_MISC_VAS_H

#include <asm/ioctl.h>

#define VAS_MAGIC	'v'

#define VAS_TX_WIN_OPEN	_IOW(VAS_MAGIC, 0x20, struct vas_tx_win_open_attr)

struct vas_tx_win_open_attr {

	__u32	version;

	__s16	vas_id;	/* specific instance of vas or -1 for default */

	__u16	reserved1;

	__u64	flags;	/* Future use */

	__u64	reserved2[6];

};

#endif /* _UAPI_MISC_VAS_H */