Commit 7852dada authored by David S. Miller's avatar David S. Miller
Browse files

Merge branch 'phy_turn_around' 



Florian Fainelli says:

====================
net: phy: broken turn-around support

This is an attempt at solving the broken turn-around problem in a way that
is not specific to the mdio-gpio driver, since it affects different kinds of
platforms.

We cannot make that localized to PHY device drivers because probing the PHY
device which has a broken turn-around can fail as early as in get_phy_id(),
therefore we need a bit of help from Device Tree/platform_data.
====================

Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents fa787ae0 ea48b2b8

Documentation/devicetree/bindings/net/phy.txt

+3 −0
Original line number Diff line number Diff line
@@ -30,6 +30,9 @@ Optional Properties: 


- max-speed: Maximum PHY supported speed (10, 100, 1000...)



- broken-turn-around: If set, indicates the PHY device does not correctly

  release the turn around line low at the end of a MDIO transaction.



Example:



ethernet-phy@0 {

drivers/net/phy/mdio-bitbang.c

+5 −2
Original line number Diff line number Diff line
@@ -165,8 +165,11 @@ static int mdiobb_read(struct mii_bus *bus, int phy, int reg) 


	ctrl->ops->set_mdio_dir(ctrl, 0);



	/* check the turnaround bit: the PHY should be driving it to zero */

	if (mdiobb_get_bit(ctrl) != 0) {

	/* check the turnaround bit: the PHY should be driving it to zero, if this

	 * PHY is listed in phy_ignore_ta_mask as having broken TA, skip that

	 */

	if (mdiobb_get_bit(ctrl) != 0 &&

	    !(bus->phy_ignore_ta_mask & (1 << phy))) {

		/* PHY didn't drive TA low -- flush any bits it

		 * may be trying to send.

		 */

drivers/of/of_mdio.c

+3 −0
Original line number Diff line number Diff line
@@ -68,6 +68,9 @@ static int of_mdiobus_register_phy(struct mii_bus *mdio, struct device_node *chi 
			phy->irq = mdio->irq[addr];

	}



	if (of_property_read_bool(child, "broken-turn-around"))

		mdio->phy_ignore_ta_mask |= 1 << addr;



	/* Associate the OF node with the device structure so it

	 * can be looked up later */

	of_node_get(child);

include/linux/phy.h

+3 −0
Original line number Diff line number Diff line
@@ -181,6 +181,9 @@ struct mii_bus { 
	/* PHY addresses to be ignored when probing */

	u32 phy_mask;



	/* PHY addresses to ignore the TA/read failure */

	u32 phy_ignore_ta_mask;



	/*

	 * Pointer to an array of interrupts, each PHY's

	 * interrupt at the index matching its address

CRA Git | Maintained and supported by SUSTech CRA and CCSE