Commit 762fd1ae authored by Kalle Valo's avatar Kalle Valo
Browse files

ath10k: remove repeated words in comments

parent 3650b228
Loading
Loading
Loading
Loading
+1 −1
Original line number Diff line number Diff line
@@ -2636,7 +2636,7 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode,
		if (status)
			goto err;

		/* Some of of qca988x solutions are having global reset issue
		/* Some of qca988x solutions are having global reset issue
		 * during target initialization. Bypassing PLL setting before
		 * downloading firmware and letting the SoC run on REF_CLK is
		 * fixing the problem. Corresponding firmware change is also
+1 −1
Original line number Diff line number Diff line
@@ -1764,7 +1764,7 @@ static ssize_t ath10k_write_simulate_radar(struct file *file,
	struct ath10k *ar = file->private_data;
	struct ath10k_vif *arvif;

	/* Just check for for the first vif alone, as all the vifs will be
	/* Just check for the first vif alone, as all the vifs will be
	 * sharing the same channel and if the channel is disabled, all the
	 * vifs will share the same 'is_started' state.
	 */
+1 −1
Original line number Diff line number Diff line
@@ -5457,7 +5457,7 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
	/* Some firmware revisions don't wait for beacon tx completion before
	 * sending another SWBA event. This could lead to hardware using old
	 * (freed) beacon data in some cases, e.g. tx credit starvation
	 * combined with missed TBTT. This is very very rare.
	 * combined with missed TBTT. This is very rare.
	 *
	 * On non-IOMMU-enabled hosts this could be a possible security issue
	 * because hw could beacon some random data on the air.  On
+1 −1
Original line number Diff line number Diff line
@@ -68,7 +68,7 @@ struct rx_attention {
 *		first_msdu is set.
 *
 * peer_idx_invalid
 *		Indicates no matching entries within the the max search
 *		Indicates no matching entries within the max search
 *		count.  Only set when first_msdu is set.
 *
 * peer_idx_timeout
+1 −1
Original line number Diff line number Diff line
@@ -1248,7 +1248,7 @@ static int ath10k_sdio_bmi_exchange_msg(struct ath10k *ar,
	 *        Wait for first 4 bytes to be in FIFO
	 *        If CONSERVATIVE_BMI_READ is enabled, also wait for
	 *        a BMI command credit, which indicates that the ENTIRE
	 *        response is available in the the FIFO
	 *        response is available in the FIFO
	 *
	 *  CASE 3: length > 128
	 *        Wait for the first 4 bytes to be in FIFO
+2 −2

File changed.

Contains only whitespace changes.

Loading