Commit 75a442ef authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge branch 'for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata 

Pull libata updates from Tejun Heo:
 "libata saw quite a bit of activities in this cycle:

   - SMR drive support still being worked on

   - bug fixes and improvements to misc SCSI command emulation

   - some low level driver updates"

* 'for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (39 commits)
  libata-scsi: better style in ata_msense_*()
  AHCI: Clear GHC.IS to prevent unexpectly asserting INTx
  ata: sata_dwc_460ex: remove redundant dev_err call
  ata: define ATA_PROT_* in terms of ATA_PROT_FLAG_*
  libata: remove ATA_PROT_FLAG_DATA
  libata: remove ata_is_nodata
  ata: make lba_{28,48}_ok() use ATA_MAX_SECTORS{,_LBA48}
  libata-scsi: minor cleanup for ata_scsi_zbc_out_xlat
  libata-scsi: Fix ZBC management out command translation
  libata-scsi: Fix translation of REPORT ZONES command
  ata: Handle ATA NCQ NO-DATA commands correctly
  libata-eh: decode all taskfile protocols
  ata: fixup ATA_PROT_NODATA
  libsas: use ata_is_ncq() and ata_has_dma() accessors
  libata: use ata_is_ncq() accessors
  libata: return boolean values from ata_is_*
  libata-scsi: avoid repeated calculation of number of TRIM ranges
  libata-scsi: reject WRITE SAME (16) with n_block that exceeds limit
  libata-scsi: rename ata_msense_ctl_mode() to ata_msense_control()
  libata-scsi: fix D_SENSE bit relection in control mode page
  ...
parents b55b0487 737bee93

Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt→Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt

+5 −4
Original line number Diff line number Diff line 
* Broadcom SATA3 AHCI Controller for STB

* Broadcom SATA3 AHCI Controller



SATA nodes are defined to describe on-chip Serial ATA controllers.

Each SATA controller should have its own node.
@@ -7,6 +7,7 @@ Required properties: 
- compatible         : should be one or more of

			"brcm,bcm7425-ahci"

			"brcm,bcm7445-ahci"

			"brcm,bcm-nsp-ahci"

			"brcm,sata3-ahci"

- reg                : register mappings for AHCI and SATA_TOP_CTRL

- reg-names          : "ahci" and "top-ctrl"

Documentation/devicetree/bindings/phy/brcm-sata-phy.txt

+3 −1
Original line number Diff line number Diff line
@@ -5,6 +5,7 @@ Required properties: 
     "brcm,bcm7425-sata-phy"

     "brcm,bcm7445-sata-phy"

     "brcm,iproc-ns2-sata-phy"

     "brcm,iproc-nsp-sata-phy"

     "brcm,phy-sata3"

- address-cells: should be 1

- size-cells: should be 0
@@ -22,7 +23,8 @@ Sub-nodes required properties: 


Sub-nodes optional properties:

- brcm,enable-ssc: use spread spectrum clocking (SSC) on this port

     This property is not applicable for "brcm,iproc-ns2-sata-phy".

     This property is not applicable for "brcm,iproc-ns2-sata-phy" and

     "brcm,iproc-nsp-sata-phy".



Example:

	sata-phy@f0458100 {

MAINTAINERS

+1 −0
Original line number Diff line number Diff line
@@ -6768,6 +6768,7 @@ S: Maintained 
F:	drivers/ata/

F:	include/linux/ata.h

F:	include/linux/libata.h

F:	Documentation/devicetree/bindings/ata/



LIBATA PATA ARASAN COMPACT FLASH CONTROLLER

M:	Viresh Kumar <vireshk@kernel.org>

arch/arm/boot/dts/bcm-nsp.dtsi

+42 −0
Original line number Diff line number Diff line
@@ -271,6 +271,48 @@ 
			      <0x30028 0x04>,

			      <0x3f408 0x04>;

		};



		sata_phy: sata_phy@40100 {

			compatible = "brcm,iproc-nsp-sata-phy";

			reg = <0x40100 0x340>;

			reg-names = "phy";

			#address-cells = <1>;

			#size-cells = <0>;



			sata_phy0: sata-phy@0 {

				reg = <0>;

				#phy-cells = <0>;

				status = "disabled";

			};



			sata_phy1: sata-phy@1 {

				reg = <1>;

				#phy-cells = <0>;

				status = "disabled";

			};

		};



		sata: ahci@41000 {

			compatible = "brcm,bcm-nsp-ahci";

			reg-names = "ahci", "top-ctrl";

			reg = <0x41000 0x1000>, <0x40020 0x1c>;

			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;

			#address-cells = <1>;

			#size-cells = <0>;

			status = "disabled";



			sata0: sata-port@0 {

				reg = <0>;

				phys = <&sata_phy0>;

				phy-names = "sata-phy";

			};



			sata1: sata-port@1 {

				reg = <1>;

				phys = <&sata_phy1>;

				phy-names = "sata-phy";

			};

		};

	};



	pcie0: pcie@18012000 {

arch/arm/boot/dts/bcm958625k.dts

+12 −0
Original line number Diff line number Diff line
@@ -68,6 +68,18 @@ 
	status = "okay";

};



&sata_phy0 {

	status = "okay";

};



&sata_phy1 {

	status = "okay";

};



&sata {

	status = "okay";

};



&nand {

	nandcs@0 {

		compatible = "brcm,nandcs";

CRA Git | Maintained and supported by SUSTech CRA and CCSE