Commit 754d5c78 authored by Olof Johansson's avatar Olof Johansson
Browse files

Merge tag 'qcom-arm64-for-4.3' of git://codeaurora.org/quic/kernel/agross-msm into next/arm64 

Qualcomm ARM64 Updates for v4.3

* Add BLSP and required pinctrl info for MSM8916
* Add SDHC aliases and nodes for MSM8916
* Add USB nodes for MSM8916
* Add APQ8016 SBC specific USB configuration
* Add APQ8016 LED configuration

* tag 'qcom-arm64-for-4.3' of git://codeaurora.org/quic/kernel/agross-msm

:
  arm64: dts: qcom: Add apq8016-sbc board LED's related device nodes
  arm64: dts: qcom: Fix apq8016-sbc board USB related pin definitions
  arm64: dts: qcom: apq8016-sbc: Don't hog client driver pins
  arm64: dts: qcom: Add msm8916 USB configuration nodes
  arm64: dts: qcom: Add msm8916 sdhci configuration nodes
  arm64: dts: qcom: Add msm8916 BLSP device nodes
  arm64: dts: qcom: Extend msm8916 pinctrl device coverage

Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parents 70d334ca 9943230c

arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi

+22 −12
Original line number Diff line number Diff line
@@ -2,27 +2,37 @@ 


&pm8916_gpios {



	pinctrl-names = "default";

	pinctrl-0 = <&pm8916_gpios_default>;



	pm8916_gpios_default: default {

		usb_hub_reset_pm {

			pins = "gpio1";

	usb_hub_reset_pm: usb_hub_reset_pm {

		pinconf {

			pins = "gpio3";

			function = PMIC_GPIO_FUNC_NORMAL;

			output-low;

		};

		usb_sw_sel_pm {

			pins = "gpio2";

	};



	usb_sw_sel_pm: usb_sw_sel_pm {

		pinconf {

			pins = "gpio4";

			function = PMIC_GPIO_FUNC_NORMAL;

			power-source = <PM8916_GPIO_VPH>;

			input-disable;

		};

		usr_led_3_ctrl {

			pins = "gpio3";

	};



	pm8916_gpios_leds: pm8916_gpios_leds {

		pinconf {

			pins = "gpio1", "gpio2";

			function = PMIC_GPIO_FUNC_NORMAL;

			output-low;

		};

		usr_led_4_ctrl {

			pins = "gpio4";

	};

};



&pm8916_mpps {



	pm8916_mpps_leds: pm8916_mpps_leds {

		pinconf {

			pins = "mpp2", "mpp3";

			function = PMIC_GPIO_FUNC_NORMAL;

			output-low;

		};

arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi

+3 −11
Original line number Diff line number Diff line
@@ -3,17 +3,9 @@ 


&msmgpio {



	pinctrl-names = "default";

	pinctrl-0 = <&soc_gpios_default>;



	soc_gpios_default: default {

		usr_led_1_ctrl_default: usr_led_1_ctrl_default {

			pins = "gpio21";

			function = "gpio";

			output-low;

		};

		usr_led_2_ctrl_default: usr_led_2_ctrl_default {

			pins = "gpio120";

	msmgpio_leds: msmgpio_leds {

		pinconf {

			pins = "gpio21", "gpio120";

			function = "gpio";

			output-low;

		};

arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi

+51 −0
Original line number Diff line number Diff line
@@ -32,5 +32,56 @@ 
			pinctrl-0 = <&blsp1_uart2_default>;

			pinctrl-1 = <&blsp1_uart2_sleep>;

		};



		leds {

			pinctrl-names = "default";

			pinctrl-0 = <&msmgpio_leds>,

				    <&pm8916_gpios_leds>,

				    <&pm8916_mpps_leds>;



			compatible = "gpio-leds";



			led@1 {

				label = "apq8016-sbc:green:user1";

				gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>;

				linux,default-trigger = "heartbeat";

				default-state = "off";

			};



			led@2 {

				label = "apq8016-sbc:green:user2";

				gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>;

				linux,default-trigger = "mmc0";

				default-state = "off";

			};



			led@3 {

				label = "apq8016-sbc:green:user3";

				gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>;

				linux,default-trigger = "mmc1";

				default-state = "off";

			};



			led@4 {

				label = "apq8016-sbc:green:user4";

				gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;

				linux,default-trigger = "none";

				default-state = "off";

			};



			led@5 {

				label = "apq8016-sbc:yellow:wlan";

				gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;

				linux,default-trigger = "wlan";

				default-state = "off";

			};



			led@6 {

				label = "apq8016-sbc:blue:bt";

				gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;

				linux,default-trigger = "bt";

				default-state = "off";

			};

		};

	};

};

arch/arm64/boot/dts/qcom/msm8916-pins.dtsi

0 → 100644
+430 −0
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&msmgpio {



	blsp1_uart2_default: blsp1_uart2_default {

		pinmux {

			function = "blsp_uart2";

			pins = "gpio4", "gpio5";

		};

		pinconf {

			pins = "gpio4", "gpio5";

			drive-strength = <16>;

			bias-disable;

		};

	};



	blsp1_uart2_sleep: blsp1_uart2_sleep {

		pinmux {

			function = "blsp_uart2";

			pins = "gpio4", "gpio5";

		};

		pinconf {

			pins = "gpio4", "gpio5";

			drive-strength = <2>;

			bias-pull-down;

		};

	};



	spi1_default: spi1_default {

		pinmux {

			function = "blsp_spi1";

			pins = "gpio0", "gpio1", "gpio3";

		};

		pinmux_cs {

			function = "gpio";

			pins = "gpio2";

		};

		pinconf {

			pins = "gpio0", "gpio1", "gpio3";

			drive-strength = <12>;

			bias-disable;

		};

		pinconf_cs {

			pins = "gpio2";

			drive-strength = <2>;

			bias-disable;

			output-high;

		};

	};



	spi1_sleep: spi1_sleep {

		pinmux {

			function = "gpio";

			pins = "gpio0", "gpio1", "gpio2", "gpio3";

		};

		pinconf {

			pins = "gpio0", "gpio1", "gpio2", "gpio3";

			drive-strength = <2>;

			bias-pull-down;

		};

	};



	spi2_default: spi2_default {

		pinmux {

			function = "blsp_spi2";

			pins = "gpio4", "gpio5", "gpio7";

		};

		pinmux_cs {

			function = "gpio";

			pins = "gpio6";

		};

		pinconf {

			pins = "gpio4", "gpio5", "gpio6", "gpio7";

			drive-strength = <12>;

			bias-disable;

		};

		pinconf_cs {

			pins = "gpio6";

			drive-strength = <2>;

			bias-disable;

			output-high;

		};

	};



	spi2_sleep: spi2_sleep {

		pinmux {

			function = "gpio";

			pins = "gpio4", "gpio5", "gpio6", "gpio7";

		};

		pinconf {

			pins = "gpio4", "gpio5", "gpio6", "gpio7";

			drive-strength = <2>;

			bias-pull-down;

		};

	};



	spi3_default: spi3_default {

		pinmux {

			function = "blsp_spi3";

			pins = "gpio8", "gpio9", "gpio11";

		};

		pinmux_cs {

			function = "gpio";

			pins = "gpio10";

		};

		pinconf {

			pins = "gpio8", "gpio9", "gpio10", "gpio11";

			drive-strength = <12>;

			bias-disable;

		};

		pinconf_cs {

			pins = "gpio10";

			drive-strength = <2>;

			bias-disable;

			output-high;

		};

	};



	spi3_sleep: spi3_sleep {

		pinmux {

			function = "gpio";

			pins = "gpio8", "gpio9", "gpio10", "gpio11";

		};

		pinconf {

			pins = "gpio8", "gpio9", "gpio10", "gpio11";

			drive-strength = <2>;

			bias-pull-down;

		};

	};



	spi4_default: spi4_default {

		pinmux {

			function = "blsp_spi4";

			pins = "gpio12", "gpio13", "gpio15";

		};

		pinmux_cs {

			function = "gpio";

			pins = "gpio14";

		};

		pinconf {

			pins = "gpio12", "gpio13", "gpio14", "gpio15";

			drive-strength = <12>;

			bias-disable;

		};

		pinconf_cs {

			pins = "gpio14";

			drive-strength = <2>;

			bias-disable;

			output-high;

		};

	};



	spi4_sleep: spi4_sleep {

		pinmux {

			function = "gpio";

			pins = "gpio12", "gpio13", "gpio14", "gpio15";

		};

		pinconf {

			pins = "gpio12", "gpio13", "gpio14", "gpio15";

			drive-strength = <2>;

			bias-pull-down;

		};

	};



	spi5_default: spi5_default {

		pinmux {

			function = "blsp_spi5";

			pins = "gpio16", "gpio17", "gpio19";

		};

		pinmux_cs {

			function = "gpio";

			pins = "gpio18";

		};

		pinconf {

			pins = "gpio16", "gpio17", "gpio18", "gpio19";

			drive-strength = <12>;

			bias-disable;

		};

		pinconf_cs {

			pins = "gpio18";

			drive-strength = <2>;

			bias-disable;

			output-high;

		};

	};



	spi5_sleep: spi5_sleep {

		pinmux {

			function = "gpio";

			pins = "gpio16", "gpio17", "gpio18", "gpio19";

		};

		pinconf {

			pins = "gpio16", "gpio17", "gpio18", "gpio19";

			drive-strength = <2>;

			bias-pull-down;

		};

	};



	spi6_default: spi6_default {

		pinmux {

			function = "blsp_spi6";

			pins = "gpio20", "gpio21", "gpio23";

		};

		pinmux_cs {

			function = "gpio";

			pins = "gpio22";

		};

		pinconf {

			pins = "gpio20", "gpio21", "gpio22", "gpio23";

			drive-strength = <12>;

			bias-disable;

		};

		pinconf_cs {

			pins = "gpio22";

			drive-strength = <2>;

			bias-disable;

			output-high;

		};

	};



	spi6_sleep: spi6_sleep {

		pinmux {

			function = "gpio";

			pins = "gpio20", "gpio21", "gpio22", "gpio23";

		};

		pinconf {

			pins = "gpio20", "gpio21", "gpio22", "gpio23";

			drive-strength = <2>;

			bias-pull-down;

		};

	};



	i2c4_default: i2c4_default {

		pinmux {

			function = "blsp_i2c4";

			pins = "gpio14", "gpio15";

		};

		pinconf {

			pins = "gpio14", "gpio15";

			drive-strength = <2>;

			bias-disable = <0>;

		};

	};



	i2c4_sleep: i2c4_sleep {

		pinmux {

			function = "blsp_i2c4";

			pins = "gpio14", "gpio15";

		};

		pinconf {

			pins = "gpio14", "gpio15";

			drive-strength = <2>;

			bias-disable = <0>;

		};

	};



	sdhc2_cd_pin {

		sdc2_cd_on: cd_on {

			pinmux {

				function = "gpio";

				pins = "gpio38";

			};

			pinconf {

				pins = "gpio38";

				drive-strength = <2>;

				bias-pull-up;

			};

		};

		sdc2_cd_off: cd_off {

			pinmux {

				function = "gpio";

				pins = "gpio38";

			};

			pinconf {

				pins = "gpio38";

				drive-strength = <2>;

				bias-disable;

			};

		};

	};



	pmx_sdc1_clk {

		sdc1_clk_on: clk_on {

			pinmux {

				pins = "sdc1_clk";

			};

			pinconf {

				pins = "sdc1_clk";

				bias-disable;

				drive-strength = <16>;

			};

		};

		sdc1_clk_off: clk_off {

			pinmux {

				pins = "sdc1_clk";

			};

			pinconf {

				pins = "sdc1_clk";

				bias-disable;

				drive-strength = <2>;

			};

		};

	};



	pmx_sdc1_cmd {

		sdc1_cmd_on: cmd_on {

			pinmux {

				pins = "sdc1_cmd";

			};

			pinconf {

				pins = "sdc1_cmd";

				bias-pull-up;

				drive-strength = <10>;

			};

		};

		sdc1_cmd_off: cmd_off {

			pinmux {

				pins = "sdc1_cmd";

			};

			pinconf {

				pins = "sdc1_cmd";

				bias-pull-up;

				drive-strength = <2>;

			};

		};

	};



	pmx_sdc1_data {

		sdc1_data_on: data_on {

			pinmux {

				pins = "sdc1_data";

			};

			pinconf {

				pins = "sdc1_data";

				bias-pull-up;

				drive-strength = <10>;

			};

		};

		sdc1_data_off: data_off {

			pinmux {

				pins = "sdc1_data";

			};

			pinconf {

				pins = "sdc1_data";

				bias-pull-up;

				drive-strength = <2>;

			};

		};

	};



	pmx_sdc2_clk {

		sdc2_clk_on: clk_on {

			pinmux {

				pins = "sdc2_clk";

			};

			pinconf {

				pins = "sdc2_clk";

				bias-disable;

				drive-strength = <16>;

			};

		};

		sdc2_clk_off: clk_off {

			pinmux {

				pins = "sdc2_clk";

			};

			pinconf {

				pins = "sdc2_clk";

				bias-disable;

				drive-strength = <2>;

			};

		};

	};



	pmx_sdc2_cmd {

		sdc2_cmd_on: cmd_on {

			pinmux {

				pins = "sdc2_cmd";

			};

			pinconf {

				pins = "sdc2_cmd";

				bias-pull-up;

				drive-strength = <10>;

			};

		};

		sdc2_cmd_off: cmd_off {

			pinmux {

				pins = "sdc2_cmd";

			};

			pinconf {

				pins = "sdc2_cmd";

				bias-pull-up;

				drive-strength = <2>;

			};

		};

	};



	pmx_sdc2_data {

		sdc2_data_on: data_on {

			pinmux {

				pins = "sdc2_data";

			};

			pinconf {

				pins = "sdc2_data";

				bias-pull-up;

				drive-strength = <10>;

			};

		};

		sdc2_data_off: data_off {

			pinmux {

				pins = "sdc2_data";

			};

			pinconf {

				pins = "sdc2_data";

				bias-pull-up;

				drive-strength = <2>;

			};

		};

	};

};

arch/arm64/boot/dts/qcom/msm8916.dtsi

+202 −25
Original line number Diff line number Diff line
@@ -24,7 +24,10 @@ 
	#address-cells = <2>;

	#size-cells = <2>;



	aliases { };

	aliases {

		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */

		sdhc2 = &sdhc_2; /* SDC2 SD card slot */

	};



	chosen { };
@@ -90,30 +93,6 @@ 
			#gpio-cells = <2>;

			interrupt-controller;

			#interrupt-cells = <2>;



			blsp1_uart2_default: blsp1_uart2_default {

				pinmux {

					function = "blsp_uart2";

					pins = "gpio4", "gpio5";

				};

				pinconf {

					pins = "gpio4", "gpio5";

					drive-strength = <16>;

					bias-disable;

				};

			};



			blsp1_uart2_sleep: blsp1_uart2_sleep {

				pinmux {

					function = "blsp_uart2";

					pins = "gpio4", "gpio5";

				};

				pinconf {

					pins = "gpio4", "gpio5";

					drive-strength = <2>;

					bias-pull-down;

				};

			};

		};



		gcc: qcom,gcc@1800000 {
@@ -132,6 +111,202 @@ 
			status = "disabled";

		};



		blsp_dma: dma@7884000 {

			compatible = "qcom,bam-v1.7.0";

			reg = <0x07884000 0x23000>;

			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&gcc GCC_BLSP1_AHB_CLK>;

			clock-names = "bam_clk";

			#dma-cells = <1>;

			qcom,ee = <0>;

			status = "disabled";

		};



		blsp_spi1: spi@78b5000 {

			compatible = "qcom,spi-qup-v2.2.1";

			reg = <0x078b5000 0x600>;

			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,

				 <&gcc GCC_BLSP1_AHB_CLK>;

			clock-names = "core", "iface";

			dmas = <&blsp_dma 5>, <&blsp_dma 4>;

			dma-names = "rx", "tx";

			pinctrl-names = "default", "sleep";

			pinctrl-0 = <&spi1_default>;

			pinctrl-1 = <&spi1_sleep>;

			#address-cells = <1>;

			#size-cells = <0>;

			status = "disabled";

		};



		blsp_spi2: spi@78b6000 {

			compatible = "qcom,spi-qup-v2.2.1";

			reg = <0x078b6000 0x600>;

			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,

				 <&gcc GCC_BLSP1_AHB_CLK>;

			clock-names = "core", "iface";

			dmas = <&blsp_dma 7>, <&blsp_dma 6>;

			dma-names = "rx", "tx";

			pinctrl-names = "default", "sleep";

			pinctrl-0 = <&spi2_default>;

			pinctrl-1 = <&spi2_sleep>;

			#address-cells = <1>;

			#size-cells = <0>;

			status = "disabled";

		};



		blsp_spi3: spi@78b7000 {

			compatible = "qcom,spi-qup-v2.2.1";

			reg = <0x078b7000 0x600>;

			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,

				 <&gcc GCC_BLSP1_AHB_CLK>;

			clock-names = "core", "iface";

			dmas = <&blsp_dma 9>, <&blsp_dma 8>;

			dma-names = "rx", "tx";

			pinctrl-names = "default", "sleep";

			pinctrl-0 = <&spi3_default>;

			pinctrl-1 = <&spi3_sleep>;

			#address-cells = <1>;

			#size-cells = <0>;

			status = "disabled";

		};



		blsp_spi4: spi@78b8000 {

			compatible = "qcom,spi-qup-v2.2.1";

			reg = <0x078b8000 0x600>;

			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,

				 <&gcc GCC_BLSP1_AHB_CLK>;

			clock-names = "core", "iface";

			dmas = <&blsp_dma 11>, <&blsp_dma 10>;

			dma-names = "rx", "tx";

			pinctrl-names = "default", "sleep";

			pinctrl-0 = <&spi4_default>;

			pinctrl-1 = <&spi4_sleep>;

			#address-cells = <1>;

			#size-cells = <0>;

			status = "disabled";

		};



		blsp_spi5: spi@78b9000 {

			compatible = "qcom,spi-qup-v2.2.1";

			reg = <0x078b9000 0x600>;

			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,

				 <&gcc GCC_BLSP1_AHB_CLK>;

			clock-names = "core", "iface";

			dmas = <&blsp_dma 13>, <&blsp_dma 12>;

			dma-names = "rx", "tx";

			pinctrl-names = "default", "sleep";

			pinctrl-0 = <&spi5_default>;

			pinctrl-1 = <&spi5_sleep>;

			#address-cells = <1>;

			#size-cells = <0>;

			status = "disabled";

		};



		blsp_spi6: spi@78ba000 {

			compatible = "qcom,spi-qup-v2.2.1";

			reg = <0x078ba000 0x600>;

			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,

				 <&gcc GCC_BLSP1_AHB_CLK>;

			clock-names = "core", "iface";

			dmas = <&blsp_dma 15>, <&blsp_dma 14>;

			dma-names = "rx", "tx";

			pinctrl-names = "default", "sleep";

			pinctrl-0 = <&spi6_default>;

			pinctrl-1 = <&spi6_sleep>;

			#address-cells = <1>;

			#size-cells = <0>;

			status = "disabled";

		};



		blsp_i2c4: i2c@78b8000 {

			compatible = "qcom,i2c-qup-v2.2.1";

			reg = <0x78b8000 0x1000>;

			interrupts = <GIC_SPI 98 0>;

			clocks = <&gcc GCC_BLSP1_AHB_CLK>,

				<&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;

			clock-names = "iface", "core";

			pinctrl-names = "default", "sleep";

			pinctrl-0 = <&i2c4_default>;

			pinctrl-1 = <&i2c4_sleep>;

			#address-cells = <1>;

			#size-cells = <0>;

			status = "disabled";

		};



		sdhc_1: sdhci@07824000 {

			compatible = "qcom,sdhci-msm-v4";

			reg = <0x07824900 0x11c>, <0x07824000 0x800>;

			reg-names = "hc_mem", "core_mem";



			interrupts = <0 123 0>, <0 138 0>;

			interrupt-names = "hc_irq", "pwr_irq";

			clocks = <&gcc GCC_SDCC1_APPS_CLK>,

				 <&gcc GCC_SDCC1_AHB_CLK>;

			clock-names = "core", "iface";

			bus-width = <8>;

			non-removable;

			status = "disabled";

		};



		sdhc_2: sdhci@07864000 {

			compatible = "qcom,sdhci-msm-v4";

			reg = <0x07864900 0x11c>, <0x07864000 0x800>;

			reg-names = "hc_mem", "core_mem";



			interrupts = <0 125 0>, <0 221 0>;

			interrupt-names = "hc_irq", "pwr_irq";

			clocks = <&gcc GCC_SDCC2_APPS_CLK>,

				 <&gcc GCC_SDCC2_AHB_CLK>;

			clock-names = "core", "iface";

			bus-width = <4>;

			status = "disabled";

		};



		usb_dev: usb@78d9000 {

			compatible = "qcom,ci-hdrc";

			reg = <0x78d9000 0x400>;

			dr_mode = "peripheral";

			interrupts = <GIC_SPI 134 IRQ_TYPE_NONE>;

			usb-phy = <&usb_otg>;

			status = "disabled";

		};



		usb_host: ehci@78d9000 {

			compatible = "qcom,ehci-host";

			reg = <0x78d9000 0x400>;

			interrupts = <GIC_SPI 134 IRQ_TYPE_NONE>;

			usb-phy = <&usb_otg>;

			status = "disabled";

		};



		usb_otg: phy@78d9000 {

			compatible = "qcom,usb-otg-snps";

			reg = <0x78d9000 0x400>;

			interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_BOTH>,

				     <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>;



			qcom,vdd-levels = <1 5 7>;

			qcom,phy-init-sequence = <0x44 0x6B 0x24 0x13>;

			dr_mode = "peripheral";

			qcom,otg-control = <2>; // PMIC



			clocks = <&gcc GCC_USB_HS_AHB_CLK>,

				 <&gcc GCC_USB_HS_SYSTEM_CLK>,

				 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;

			clock-names = "iface", "core", "sleep";



			resets = <&gcc GCC_USB2A_PHY_BCR>,

				 <&gcc GCC_USB_HS_BCR>;

			reset-names = "phy", "link";

			status = "disabled";

		};



		intc: interrupt-controller@b000000 {

			compatible = "qcom,msm-qgic2";

			interrupt-controller;
@@ -217,3 +392,5 @@ 
		};

	};

};



#include "msm8916-pins.dtsi"

CRA Git | Maintained and supported by SUSTech CRA and CCSE