Commit 7529b257 authored by Kai-Heng Feng's avatar Kai-Heng Feng Committed by Greg Kroah-Hartman
Browse files

USB: Add new USB LPM helpers 



Use new helpers to make LPM enabling/disabling more clear.

This is a preparation to subsequent patch.

Signed-off-by: default avatarKai-Heng Feng <kai.heng.feng@canonical.com>
Cc: stable <stable@vger.kernel.org> # after much soaking
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 5f620bb6

drivers/usb/core/driver.c

+11 −1
Original line number Diff line number Diff line
@@ -1896,7 +1896,7 @@ int usb_runtime_idle(struct device *dev) 
	return -EBUSY;

}



int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable)

static int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable)

{

	struct usb_hcd *hcd = bus_to_hcd(udev->bus);

	int ret = -EPERM;
@@ -1913,6 +1913,16 @@ int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable) 
	return ret;

}



int usb_enable_usb2_hardware_lpm(struct usb_device *udev)

{

	return usb_set_usb2_hardware_lpm(udev, 1);

}



int usb_disable_usb2_hardware_lpm(struct usb_device *udev)

{

	return usb_set_usb2_hardware_lpm(udev, 0);

}



#endif /* CONFIG_PM */



struct bus_type usb_bus_type = {

drivers/usb/core/hub.c

+6 −6
Original line number Diff line number Diff line
@@ -3252,7 +3252,7 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) 


	/* disable USB2 hardware LPM */

	if (udev->usb2_hw_lpm_enabled == 1)

		usb_set_usb2_hardware_lpm(udev, 0);

		usb_disable_usb2_hardware_lpm(udev);



	if (usb_disable_ltm(udev)) {

		dev_err(&udev->dev, "Failed to disable LTM before suspend\n");
@@ -3291,7 +3291,7 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) 
 err_ltm:

		/* Try to enable USB2 hardware LPM again */

		if (udev->usb2_hw_lpm_capable == 1)

			usb_set_usb2_hardware_lpm(udev, 1);

			usb_enable_usb2_hardware_lpm(udev);



		if (udev->do_remote_wakeup)

			(void) usb_disable_remote_wakeup(udev);
@@ -3575,7 +3575,7 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg) 
	} else  {

		/* Try to enable USB2 hardware LPM */

		if (udev->usb2_hw_lpm_capable == 1)

			usb_set_usb2_hardware_lpm(udev, 1);

			usb_enable_usb2_hardware_lpm(udev);



		/* Try to enable USB3 LTM */

		usb_enable_ltm(udev);
@@ -4466,7 +4466,7 @@ static void hub_set_initial_usb2_lpm_policy(struct usb_device *udev) 
	if ((udev->bos->ext_cap->bmAttributes & cpu_to_le32(USB_BESL_SUPPORT)) ||

			connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) {

		udev->usb2_hw_lpm_allowed = 1;

		usb_set_usb2_hardware_lpm(udev, 1);

		usb_enable_usb2_hardware_lpm(udev);

	}

}
@@ -5681,7 +5681,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev) 
	 * It will be re-enabled by the enumeration process.

	 */

	if (udev->usb2_hw_lpm_enabled == 1)

		usb_set_usb2_hardware_lpm(udev, 0);

		usb_disable_usb2_hardware_lpm(udev);



	/* Disable LPM while we reset the device and reinstall the alt settings.

	 * Device-initiated LPM, and system exit latency settings are cleared
@@ -5784,7 +5784,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev) 


done:

	/* Now that the alt settings are re-installed, enable LTM and LPM. */

	usb_set_usb2_hardware_lpm(udev, 1);

	usb_enable_usb2_hardware_lpm(udev);

	usb_unlocked_enable_lpm(udev);

	usb_enable_ltm(udev);

	usb_release_bos_descriptor(udev);

drivers/usb/core/message.c

+1 −1
Original line number Diff line number Diff line
@@ -1244,7 +1244,7 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0) 
		}



		if (dev->usb2_hw_lpm_enabled == 1)

			usb_set_usb2_hardware_lpm(dev, 0);

			usb_disable_usb2_hardware_lpm(dev);

		usb_unlocked_disable_lpm(dev);

		usb_disable_ltm(dev);

drivers/usb/core/sysfs.c

+4 −1
Original line number Diff line number Diff line
@@ -528,7 +528,10 @@ static ssize_t usb2_hardware_lpm_store(struct device *dev, 


	if (!ret) {

		udev->usb2_hw_lpm_allowed = value;

		ret = usb_set_usb2_hardware_lpm(udev, value);

		if (value)

			ret = usb_enable_usb2_hardware_lpm(udev);

		else

			ret = usb_disable_usb2_hardware_lpm(udev);

	}



	usb_unlock_device(udev);

drivers/usb/core/usb.h

+8 −2
Original line number Diff line number Diff line
@@ -92,7 +92,8 @@ extern int usb_remote_wakeup(struct usb_device *dev); 
extern int usb_runtime_suspend(struct device *dev);

extern int usb_runtime_resume(struct device *dev);

extern int usb_runtime_idle(struct device *dev);

extern int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable);

extern int usb_enable_usb2_hardware_lpm(struct usb_device *udev);

extern int usb_disable_usb2_hardware_lpm(struct usb_device *udev);



#else
@@ -112,7 +113,12 @@ static inline int usb_autoresume_device(struct usb_device *udev) 
	return 0;

}



static inline int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable)

static inline int usb_enable_usb2_hardware_lpm(struct usb_device *udev)

{

	return 0;

}



static inline int usb_disable_usb2_hardware_lpm(struct usb_device *udev)

{

	return 0;

}

CRA Git | Maintained and supported by SUSTech CRA and CCSE