+7
−1
+32
−1
Loading
Gitlab 现已全面支持 git over ssh 与 git over https。通过 HTTPS 访问请配置带有 read_repository / write_repository 权限的 Personal access token。通过 SSH 端口访问请使用 22 端口或 13389 端口。如果使用CAS注册了账户但不知道密码,可以自行至设置中更改;如有其他问题,请发邮件至 service@cra.moe 寻求协助。
Hangbin Liu says:
====================
IPv6: reply ICMP error if fragment doesn't contain all headers
When our Engineer run latest IPv6 Core Conformance test, test v6LC.1.3.6:
First Fragment Doesn’t Contain All Headers[1] failed. The test purpose is to
verify that the node (Linux for example) should properly process IPv6 packets
that don’t include all the headers through the Upper-Layer header.
Based on RFC 8200, Section 4.5 Fragment Header
- If the first fragment does not include all headers through an
Upper-Layer header, then that fragment should be discarded and
an ICMP Parameter Problem, Code 3, message should be sent to
the source of the fragment, with the Pointer field set to zero.
The first patch add a definition for ICMPv6 Parameter Problem, code 3.
The second patch add a check for the 1st fragment packet to make sure
Upper-Layer header exist.
[1] Page 68, v6LC.1.3.6: First Fragment Doesn’t Contain All Headers part A, B,
C and D at https://ipv6ready.org/docs/Core_Conformance_5_0_0.pdf
[2] My reproducer:
import sys, os
from scapy.all import *
def send_frag_dst_opt(src_ip6, dst_ip6):
ip6 = IPv6(src = src_ip6, dst = dst_ip6, nh = 44)
frag_1 = IPv6ExtHdrFragment(nh = 60, m = 1)
dst_opt = IPv6ExtHdrDestOpt(nh = 58)
frag_2 = IPv6ExtHdrFragment(nh = 58, offset = 4, m = 1)
icmp_echo = ICMPv6EchoRequest(seq = 1)
pkt_1 = ip6/frag_1/dst_opt
pkt_2 = ip6/frag_2/icmp_echo
send(pkt_1)
send(pkt_2)
def send_frag_route_opt(src_ip6, dst_ip6):
ip6 = IPv6(src = src_ip6, dst = dst_ip6, nh = 44)
frag_1 = IPv6ExtHdrFragment(nh = 43, m = 1)
route_opt = IPv6ExtHdrRouting(nh = 58)
frag_2 = IPv6ExtHdrFragment(nh = 58, offset = 4, m = 1)
icmp_echo = ICMPv6EchoRequest(seq = 2)
pkt_1 = ip6/frag_1/route_opt
pkt_2 = ip6/frag_2/icmp_echo
send(pkt_1)
send(pkt_2)
if __name__ == '__main__':
src = sys.argv[1]
dst = sys.argv[2]
conf.iface = sys.argv[3]
send_frag_dst_opt(src, dst)
send_frag_route_opt(src, dst)
====================
Link: https://lore.kernel.org/r/20201027123313.3717941-1-liuhangbin@gmail.com
Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
CRA Git | Maintained and supported by SUSTech CRA and CCSE