Commit 726b6324 authored by Marek Szyprowski's avatar Marek Szyprowski Committed by Ulf Hansson
Browse files

mmc: pwrseq: add driver for emmc hardware reset 



This patch provides a simple mmc-pwrseq-emmc driver, which controls
single gpio line. It perform standard eMMC hw reset procedure, as
descibed by Jedec 4.4 specification. This procedure is performed just
after MMC core enabled power to the given mmc host (to fix possible
issues if bootloader has left eMMC card in initialized or unknown
state), and before performing complete system reboot (also in case of
emergency reboot call). The latter is needed on boards, which doesn't
have hardware reset logic connected to emmc card and (limited or broken)
ROM bootloaders are unable to read second stage from the emmc card if
the card is left in unknown or already initialized state.

Signed-off-by: default avatarMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
parent 3981c516

Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt

0 → 100644
+25 −0
Original line number Diff line number Diff line 
* The simple eMMC hardware reset provider



The purpose of this driver is to perform standard eMMC hw reset

procedure, as descibed by Jedec 4.4 specification. This procedure is

performed just after MMC core enabled power to the given mmc host (to

fix possible issues if bootloader has left eMMC card in initialized or

unknown state), and before performing complete system reboot (also in

case of emergency reboot call). The latter is needed on boards, which

doesn't have hardware reset logic connected to emmc card and (limited or

broken) ROM bootloaders are unable to read second stage from the emmc

card if the card is left in unknown or already initialized state.



Required properties:

- compatible : contains "mmc-pwrseq-emmc".

- reset-gpios : contains a GPIO specifier. The reset GPIO is asserted

	and then deasserted to perform eMMC card reset. To perform

	reset procedure as described in Jedec 4.4 specification, the

	gpio line should be defined as GPIO_ACTIVE_LOW.



Example:



	sdhci0_pwrseq {

		compatible = "mmc-pwrseq-emmc";

		reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;

	}

drivers/mmc/core/Makefile

+1 −1
Original line number Diff line number Diff line
@@ -8,5 +8,5 @@ mmc_core-y := core.o bus.o host.o \ 
				   sdio.o sdio_ops.o sdio_bus.o \

				   sdio_cis.o sdio_io.o sdio_irq.o \

				   quirks.o slot-gpio.o

mmc_core-$(CONFIG_OF)		+= pwrseq.o pwrseq_simple.o

mmc_core-$(CONFIG_OF)		+= pwrseq.o pwrseq_simple.o pwrseq_emmc.o

mmc_core-$(CONFIG_DEBUG_FS)	+= debugfs.o

drivers/mmc/core/pwrseq.c

+3 −0
Original line number Diff line number Diff line
@@ -26,6 +26,9 @@ static struct mmc_pwrseq_match pwrseq_match[] = { 
	{

		.compatible = "mmc-pwrseq-simple",

		.alloc = mmc_pwrseq_simple_alloc,

	}, {

		.compatible = "mmc-pwrseq-emmc",

		.alloc = mmc_pwrseq_emmc_alloc,

	},

};

drivers/mmc/core/pwrseq.h

+1 −0
Original line number Diff line number Diff line
@@ -28,6 +28,7 @@ void mmc_pwrseq_power_off(struct mmc_host *host); 
void mmc_pwrseq_free(struct mmc_host *host);



int mmc_pwrseq_simple_alloc(struct mmc_host *host, struct device *dev);

int mmc_pwrseq_emmc_alloc(struct mmc_host *host, struct device *dev);



#else

drivers/mmc/core/pwrseq_emmc.c

0 → 100644
+101 −0
Original line number Diff line number Diff line 
/*

 * Copyright (C) 2015, Samsung Electronics Co., Ltd.

 *

 * Author: Marek Szyprowski <m.szyprowski@samsung.com>

 *

 * License terms: GNU General Public License (GPL) version 2

 *

 * Simple eMMC hardware reset provider

 */

#include <linux/delay.h>

#include <linux/kernel.h>

#include <linux/slab.h>

#include <linux/device.h>

#include <linux/err.h>

#include <linux/gpio/consumer.h>

#include <linux/reboot.h>



#include <linux/mmc/host.h>



#include "pwrseq.h"



struct mmc_pwrseq_emmc {

	struct mmc_pwrseq pwrseq;

	struct notifier_block reset_nb;

	struct gpio_desc *reset_gpio;

};



static void __mmc_pwrseq_emmc_reset(struct mmc_pwrseq_emmc *pwrseq)

{

	gpiod_set_value(pwrseq->reset_gpio, 1);

	udelay(1);

	gpiod_set_value(pwrseq->reset_gpio, 0);

	udelay(200);

}



static void mmc_pwrseq_emmc_reset(struct mmc_host *host)

{

	struct mmc_pwrseq_emmc *pwrseq = container_of(host->pwrseq,

					struct mmc_pwrseq_emmc, pwrseq);



	__mmc_pwrseq_emmc_reset(pwrseq);

}



static void mmc_pwrseq_emmc_free(struct mmc_host *host)

{

	struct mmc_pwrseq_emmc *pwrseq = container_of(host->pwrseq,

					struct mmc_pwrseq_emmc, pwrseq);



	unregister_restart_handler(&pwrseq->reset_nb);

	gpiod_put(pwrseq->reset_gpio);

	kfree(pwrseq);

	host->pwrseq = NULL;

}



static struct mmc_pwrseq_ops mmc_pwrseq_emmc_ops = {

	.post_power_on = mmc_pwrseq_emmc_reset,

	.free = mmc_pwrseq_emmc_free,

};



static int mmc_pwrseq_emmc_reset_nb(struct notifier_block *this,

				    unsigned long mode, void *cmd)

{

	struct mmc_pwrseq_emmc *pwrseq = container_of(this,

					struct mmc_pwrseq_emmc, reset_nb);



	__mmc_pwrseq_emmc_reset(pwrseq);

	return NOTIFY_DONE;

}



int mmc_pwrseq_emmc_alloc(struct mmc_host *host, struct device *dev)

{

	struct mmc_pwrseq_emmc *pwrseq;

	int ret = 0;



	pwrseq = kzalloc(sizeof(struct mmc_pwrseq_emmc), GFP_KERNEL);

	if (!pwrseq)

		return -ENOMEM;



	pwrseq->reset_gpio = gpiod_get_index(dev, "reset", 0, GPIOD_OUT_LOW);

	if (IS_ERR(pwrseq->reset_gpio)) {

		ret = PTR_ERR(pwrseq->reset_gpio);

		goto free;

	}



	/*

	 * register reset handler to ensure emmc reset also from

	 * emergency_reboot(), priority 129 schedules it just before

	 * system reboot

	 */

	pwrseq->reset_nb.notifier_call = mmc_pwrseq_emmc_reset_nb;

	pwrseq->reset_nb.priority = 129;

	register_restart_handler(&pwrseq->reset_nb);



	pwrseq->pwrseq.ops = &mmc_pwrseq_emmc_ops;

	host->pwrseq = &pwrseq->pwrseq;



	return 0;

free:

	kfree(pwrseq);

	return ret;

}

CRA Git | Maintained and supported by SUSTech CRA and CCSE