Commit 71e84db1 authored by Arnd Bergmann's avatar Arnd Bergmann
Browse files

Merge tag 'omap-for-v4.9/dt-pt2-signed' of... 

Merge tag 'omap-for-v4.9/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Pull "omap dts updates for v4.9 merge window, part 2" from Tony Lindgren:

Part two of device tree changes for omaps for v4.9 merge window. This
is mostly usability and non-critical fixes except for the addition of
beagleboard-x15 rev B1 support:

- Fix omap4 pandaboard SDIO WLAN latencies in idle mode by enabling wakeirq

- Usability fixes for WLAN, USB, LEDs and power button on omap5 boards

- Remove am57xx beagleboard-x15 pinmux configuration as the processor requires
  that it's done in IO isolation in bootloader except for MMC and DCAN

- Add support for beagleboard-x15 rev B1 by moving most of the
  configuration to am57xx-beagle-x15-common.dtsi

- Enable support for more than 2GB of memory for omap5 with LPAE with
  #address-cells

- Fix omap3-gta04 backlight PWM frequency until the PWM driver

- Revert am335x dts changes related to cpufreq as the driver changes
  still have not merged and the dts changes broke cpufreq

* tag 'omap-for-v4.9/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  Revert "ARM: dts: dra7: Move to operating-points-v2 table"
  Revert "ARM: dts: am33xx: Move to operating-points-v2 table and ti-cpufreq driver"
  Revert "ARM: dts: am335x-boneblack: Enable 1GHz OPP for cpu"
  ARM: dts: omap3-gta04: reduce panel backlight PWM frequency to 83Hz
  ARM: dts: Add support for more than 2GB of memory for omap5
  ARM: dts: am57xx-beagle-x15: Add support for rev B1
  ARM: dts: am57xx-beagle-x15: Remove pinmux configurations for erratum i869
  ARM: dts: Fix LEDs for igepv5
  ARM: dts: Add power button support for igepv5
  ARM: dts: Configure omap5 OTG ID pin
  ARM: dts: ARM: dts: Fix omap5 SDIO dat1 interrupt
  ARM: dts: Configure panda SDIO WLAN wakeirq
parents 590b9066 a2a2b821

arch/arm/boot/dts/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -584,6 +584,7 @@ dtb-$(CONFIG_SOC_OMAP5) += \ 
	omap5-uevm.dtb

dtb-$(CONFIG_SOC_DRA7XX) += \

	am57xx-beagle-x15.dtb \

	am57xx-beagle-x15-revb1.dtb \

	am57xx-cl-som-am57x.dtb \

	am57xx-sbc-am57x.dtb \

	am572x-idk.dtb \

arch/arm/boot/dts/am335x-boneblack.dts

+0 −11
Original line number Diff line number Diff line
@@ -33,17 +33,6 @@ 
	status = "okay";

};



&cpu0_opp_table {

	/*

	 * All PG 2.0 silicon may not support 1GHz but some of the early

	 * BeagleBone Blacks have PG 2.0 silicon which is guaranteed

	 * to support 1GHz OPP so enable it for PG 2.0 on this board.

	 */

	oppnitro@1000000000 {

		opp-supported-hw = <0x06 0x0100>;

	};

};



&am33xx_pinmux {

	nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {

		pinctrl-single,pins = <

arch/arm/boot/dts/am33xx.dtsi

+13 −75
Original line number Diff line number Diff line
@@ -45,9 +45,19 @@ 
			device_type = "cpu";

			reg = <0>;



			operating-points-v2 = <&cpu0_opp_table>;

			ti,syscon-efuse = <&scm_conf 0x7fc 0x1fff 0>;

			ti,syscon-rev = <&scm_conf 0x600>;

			/*

			 * To consider voltage drop between PMIC and SoC,

			 * tolerance value is reduced to 2% from 4% and

			 * voltage value is increased as a precaution.

			 */

			operating-points = <

				/* kHz    uV */

				720000  1285000

				600000  1225000

				500000  1125000

				275000  1125000

			>;

			voltage-tolerance = <2>; /* 2 percentage */



			clocks = <&dpll_mpu_ck>;

			clock-names = "cpu";
@@ -56,78 +66,6 @@ 
		};

	};



	cpu0_opp_table: opp_table0 {

		compatible = "operating-points-v2";



		/*

		 * The three following nodes are marked with opp-suspend

		 * because the can not be enabled simultaneously on a

		 * single SoC.

		 */

		opp50@300000000 {

			opp-hz = /bits/ 64 <300000000>;

			opp-microvolt = <950000 931000 969000>;

			opp-supported-hw = <0x06 0x0010>;

			opp-suspend;

		};



		opp100@275000000 {

			opp-hz = /bits/ 64 <275000000>;

			opp-microvolt = <1100000 1078000 1122000>;

			opp-supported-hw = <0x01 0x00FF>;

			opp-suspend;

		};



		opp100@300000000 {

			opp-hz = /bits/ 64 <300000000>;

			opp-microvolt = <1100000 1078000 1122000>;

			opp-supported-hw = <0x06 0x0020>;

			opp-suspend;

		};



		opp100@500000000 {

			opp-hz = /bits/ 64 <500000000>;

			opp-microvolt = <1100000 1078000 1122000>;

			opp-supported-hw = <0x01 0xFFFF>;

		};



		opp100@600000000 {

			opp-hz = /bits/ 64 <600000000>;

			opp-microvolt = <1100000 1078000 1122000>;

			opp-supported-hw = <0x06 0x0040>;

		};



		opp120@600000000 {

			opp-hz = /bits/ 64 <600000000>;

			opp-microvolt = <1200000 1176000 1224000>;

			opp-supported-hw = <0x01 0xFFFF>;

		};



		opp120@720000000 {

			opp-hz = /bits/ 64 <720000000>;

			opp-microvolt = <1200000 1176000 1224000>;

			opp-supported-hw = <0x06 0x0080>;

		};



		oppturbo@720000000 {

			opp-hz = /bits/ 64 <720000000>;

			opp-microvolt = <1260000 1234800 1285200>;

			opp-supported-hw = <0x01 0xFFFF>;

		};



		oppturbo@800000000 {

			opp-hz = /bits/ 64 <800000000>;

			opp-microvolt = <1260000 1234800 1285200>;

			opp-supported-hw = <0x06 0x0100>;

		};



		oppnitro@1000000000 {

			opp-hz = /bits/ 64 <1000000000>;

			opp-microvolt = <1325000 1298500 1351500>;

			opp-supported-hw = <0x04 0x0200>;

		};

	};



	pmu {

		compatible = "arm,cortex-a8-pmu";

		interrupts = <3>;

arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi

0 → 100644
+596 −0
Original line number Diff line number Diff line 
/*

 * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

 */

/dts-v1/;



#include "dra74x.dtsi"

#include "am57xx-commercial-grade.dtsi"

#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/interrupt-controller/irq.h>



/ {

	compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";



	aliases {

		rtc0 = &mcp_rtc;

		rtc1 = &tps659038_rtc;

		rtc2 = &rtc;

		display0 = &hdmi0;

	};



	memory@0 {

		device_type = "memory";

		reg = <0x0 0x80000000 0x0 0x80000000>;

	};



	vdd_3v3: fixedregulator-vdd_3v3 {

		compatible = "regulator-fixed";

		regulator-name = "vdd_3v3";

		vin-supply = <&regen1>;

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

	};



	aic_dvdd: fixedregulator-aic_dvdd {

		compatible = "regulator-fixed";

		regulator-name = "aic_dvdd_fixed";

		vin-supply = <&vdd_3v3>;

		regulator-min-microvolt = <1800000>;

		regulator-max-microvolt = <1800000>;

	};



	vtt_fixed: fixedregulator-vtt {

		/* TPS51200 */

		compatible = "regulator-fixed";

		regulator-name = "vtt_fixed";

		vin-supply = <&smps3_reg>;

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		regulator-always-on;

		regulator-boot-on;

		enable-active-high;

		gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;

	};



	leds {

		compatible = "gpio-leds";



		led0 {

			label = "beagle-x15:usr0";

			gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;

			linux,default-trigger = "heartbeat";

			default-state = "off";

		};



		led1 {

			label = "beagle-x15:usr1";

			gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;

			linux,default-trigger = "cpu0";

			default-state = "off";

		};



		led2 {

			label = "beagle-x15:usr2";

			gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>;

			linux,default-trigger = "mmc0";

			default-state = "off";

		};



		led3 {

			label = "beagle-x15:usr3";

			gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;

			linux,default-trigger = "disk-activity";

			default-state = "off";

		};

	};



	gpio_fan: gpio_fan {

		/* Based on 5v 500mA AFB02505HHB */

		compatible = "gpio-fan";

		gpios =  <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;

		gpio-fan,speed-map = <0     0>,

				     <13000 1>;

		#cooling-cells = <2>;

	};



	hdmi0: connector {

		compatible = "hdmi-connector";

		label = "hdmi";



		type = "a";



		port {

			hdmi_connector_in: endpoint {

				remote-endpoint = <&tpd12s015_out>;

			};

		};

	};



	tpd12s015: encoder {

		compatible = "ti,tpd12s015";



		ports {

			#address-cells = <1>;

			#size-cells = <0>;



			port@0 {

				reg = <0>;



				tpd12s015_in: endpoint {

					remote-endpoint = <&hdmi_out>;

				};

			};



			port@1 {

				reg = <1>;



				tpd12s015_out: endpoint {

					remote-endpoint = <&hdmi_connector_in>;

				};

			};

		};

	};



	sound0: sound0 {

		compatible = "simple-audio-card";

		simple-audio-card,name = "BeagleBoard-X15";

		simple-audio-card,widgets =

			"Line", "Line Out",

			"Line", "Line In";

		simple-audio-card,routing =

			"Line Out",	"LLOUT",

			"Line Out",	"RLOUT",

			"MIC2L",	"Line In",

			"MIC2R",	"Line In";

		simple-audio-card,format = "dsp_b";

		simple-audio-card,bitclock-master = <&sound0_master>;

		simple-audio-card,frame-master = <&sound0_master>;

		simple-audio-card,bitclock-inversion;



		simple-audio-card,cpu {

			sound-dai = <&mcasp3>;

		};



		sound0_master: simple-audio-card,codec {

			sound-dai = <&tlv320aic3104>;

			clocks = <&clkout2_clk>;

		};

	};

};



&dra7_pmx_core {

	mmc1_pins_default: mmc1_pins_default {

		pinctrl-single,pins = <

			DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14)	/* mmc1sdcd.gpio219 */

			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */

			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */

			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */

			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */

			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */

			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */

		>;

	};



	mmc2_pins_default: mmc2_pins_default {

		pinctrl-single,pins = <

			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */

			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */

			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */

			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */

			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */

			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */

			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */

			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */

			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */

			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */

		>;

	};

};

&i2c1 {

	status = "okay";

	clock-frequency = <400000>;



	tps659038: tps659038@58 {

		compatible = "ti,tps659038";

		reg = <0x58>;

		interrupt-parent = <&gpio1>;

		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;



		#interrupt-cells = <2>;

		interrupt-controller;



		ti,system-power-controller;



		tps659038_pmic {

			compatible = "ti,tps659038-pmic";



			regulators {

				smps12_reg: smps12 {

					/* VDD_MPU */

					regulator-name = "smps12";

					regulator-min-microvolt = < 850000>;

					regulator-max-microvolt = <1250000>;

					regulator-always-on;

					regulator-boot-on;

				};



				smps3_reg: smps3 {

					/* VDD_DDR */

					regulator-name = "smps3";

					regulator-min-microvolt = <1350000>;

					regulator-max-microvolt = <1350000>;

					regulator-always-on;

					regulator-boot-on;

				};



				smps45_reg: smps45 {

					/* VDD_DSPEVE, VDD_IVA, VDD_GPU */

					regulator-name = "smps45";

					regulator-min-microvolt = < 850000>;

					regulator-max-microvolt = <1250000>;

					regulator-always-on;

					regulator-boot-on;

				};



				smps6_reg: smps6 {

					/* VDD_CORE */

					regulator-name = "smps6";

					regulator-min-microvolt = <850000>;

					regulator-max-microvolt = <1150000>;

					regulator-always-on;

					regulator-boot-on;

				};



				/* SMPS7 unused */



				smps8_reg: smps8 {

					/* VDD_1V8 */

					regulator-name = "smps8";

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

					regulator-always-on;

					regulator-boot-on;

				};



				/* SMPS9 unused */



				ldo1_reg: ldo1 {

					/* VDD_SD / VDDSHV8  */

					regulator-name = "ldo1";

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <3300000>;

					regulator-boot-on;

					regulator-always-on;

				};



				ldo2_reg: ldo2 {

					/* VDD_SHV5 */

					regulator-name = "ldo2";

					regulator-min-microvolt = <3300000>;

					regulator-max-microvolt = <3300000>;

					regulator-always-on;

					regulator-boot-on;

				};



				ldo3_reg: ldo3 {

					/* VDDA_1V8_PHYA */

					regulator-name = "ldo3";

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

					regulator-always-on;

					regulator-boot-on;

				};



				ldo4_reg: ldo4 {

					/* VDDA_1V8_PHYB */

					regulator-name = "ldo4";

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

					regulator-always-on;

					regulator-boot-on;

				};



				ldo9_reg: ldo9 {

					/* VDD_RTC */

					regulator-name = "ldo9";

					regulator-min-microvolt = <1050000>;

					regulator-max-microvolt = <1050000>;

					regulator-always-on;

					regulator-boot-on;

				};



				ldoln_reg: ldoln {

					/* VDDA_1V8_PLL */

					regulator-name = "ldoln";

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

					regulator-always-on;

					regulator-boot-on;

				};



				ldousb_reg: ldousb {

					/* VDDA_3V_USB: VDDA_USBHS33 */

					regulator-name = "ldousb";

					regulator-min-microvolt = <3300000>;

					regulator-max-microvolt = <3300000>;

					regulator-boot-on;

				};



				regen1: regen1 {

					/* VDD_3V3_ON */

					regulator-name = "regen1";

					regulator-boot-on;

					regulator-always-on;

				};

			};

		};



		tps659038_rtc: tps659038_rtc {

			compatible = "ti,palmas-rtc";

			interrupt-parent = <&tps659038>;

			interrupts = <8 IRQ_TYPE_EDGE_FALLING>;

			wakeup-source;

		};



		tps659038_pwr_button: tps659038_pwr_button {

			compatible = "ti,palmas-pwrbutton";

			interrupt-parent = <&tps659038>;

			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;

			wakeup-source;

			ti,palmas-long-press-seconds = <12>;

		};



		tps659038_gpio: tps659038_gpio {

			compatible = "ti,palmas-gpio";

			gpio-controller;

			#gpio-cells = <2>;

		};



		extcon_usb2: tps659038_usb {

			compatible = "ti,palmas-usb-vid";

			ti,enable-vbus-detection;

			vbus-gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;

		};



	};



	tmp102: tmp102@48 {

		compatible = "ti,tmp102";

		reg = <0x48>;

		interrupt-parent = <&gpio7>;

		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;

		#thermal-sensor-cells = <1>;

	};



	tlv320aic3104: tlv320aic3104@18 {

		#sound-dai-cells = <0>;

		compatible = "ti,tlv320aic3104";

		reg = <0x18>;

		assigned-clocks = <&clkoutmux2_clk_mux>;

		assigned-clock-parents = <&sys_clk2_dclk_div>;



		status = "okay";

		adc-settle-ms = <40>;



		AVDD-supply = <&vdd_3v3>;

		IOVDD-supply = <&vdd_3v3>;

		DRVDD-supply = <&vdd_3v3>;

		DVDD-supply = <&aic_dvdd>;

	};



	eeprom: eeprom@50 {

		compatible = "at,24c32";

		reg = <0x50>;

	};

};



&i2c3 {

	status = "okay";

	clock-frequency = <400000>;



	mcp_rtc: rtc@6f {

		compatible = "microchip,mcp7941x";

		reg = <0x6f>;

		interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>,

				      <&dra7_pmx_core 0x424>;

		interrupt-names = "irq", "wakeup";



		vcc-supply = <&vdd_3v3>;

		wakeup-source;

	};

};



&gpio7 {

	ti,no-reset-on-init;

	ti,no-idle-on-init;

};



&cpu0 {

	cpu0-supply = <&smps12_reg>;

	voltage-tolerance = <1>;

};



&uart3 {

	status = "okay";

	interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,

			      <&dra7_pmx_core 0x3f8>;

};



&mac {

	status = "okay";

	dual_emac;

};



&cpsw_emac0 {

	phy_id = <&davinci_mdio>, <1>;

	phy-mode = "rgmii";

	dual_emac_res_vlan = <1>;

};



&cpsw_emac1 {

	phy_id = <&davinci_mdio>, <2>;

	phy-mode = "rgmii";

	dual_emac_res_vlan = <2>;

};



&mmc1 {

	status = "okay";



	pinctrl-names = "default";

	pinctrl-0 = <&mmc1_pins_default>;



	bus-width = <4>;

	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */

};



&mmc2 {

	status = "okay";



	pinctrl-names = "default";

	pinctrl-0 = <&mmc1_pins_default>;



	vmmc-supply = <&vdd_3v3>;

	bus-width = <8>;

	ti,non-removable;

	cap-mmc-dual-data-rate;

};



&sata {

	status = "okay";

};



&usb2_phy1 {

	phy-supply = <&ldousb_reg>;

};



&usb2_phy2 {

	phy-supply = <&ldousb_reg>;

};



&usb1 {

	dr_mode = "host";

};



&omap_dwc3_2 {

	extcon = <&extcon_usb2>;

};



&usb2 {

	/*

	 * Stand alone usage is peripheral only.

	 * However, with some resistor modifications

	 * this port can be used via expansion connectors

	 * as "host" or "dual-role". If so, provide

	 * the necessary dr_mode override in the expansion

	 * board's DT.

	 */

	dr_mode = "peripheral";

};



&cpu_trips {

	cpu_alert1: cpu_alert1 {

		temperature = <50000>; /* millicelsius */

		hysteresis = <2000>; /* millicelsius */

		type = "active";

	};

};



&cpu_cooling_maps {

	map1 {

		trip = <&cpu_alert1>;

		cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;

	};

};



&thermal_zones {

	board_thermal: board_thermal {

		polling-delay-passive = <1250>; /* milliseconds */

		polling-delay = <1500>; /* milliseconds */



				/* sensor       ID */

		thermal-sensors = <&tmp102     0>;



		board_trips: trips {

			board_alert0: board_alert {

				temperature = <40000>; /* millicelsius */

				hysteresis = <2000>; /* millicelsius */

				type = "active";

			};



			board_crit: board_crit {

				temperature = <105000>; /* millicelsius */

				hysteresis = <0>; /* millicelsius */

				type = "critical";

			};

		};



		board_cooling_maps: cooling-maps {

			map0 {

				trip = <&board_alert0>;

				cooling-device =

				  <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;

			};

		};

       };

};



&dss {

	status = "ok";



	vdda_video-supply = <&ldoln_reg>;

};



&hdmi {

	status = "ok";

	vdda-supply = <&ldo4_reg>;



	port {

		hdmi_out: endpoint {

			remote-endpoint = <&tpd12s015_in>;

		};

	};

};



&pcie1 {

	gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;

};



&mcasp3 {

	#sound-dai-cells = <0>;

	assigned-clocks = <&mcasp3_ahclkx_mux>;

	assigned-clock-parents = <&sys_clkin2>;

	status = "okay";



	op-mode = <0>;	/* MCASP_IIS_MODE */

	tdm-slots = <2>;

	/* 4 serializers */

	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */

		1 2 0 0

	>;

	tx-num-evt = <32>;

	rx-num-evt = <32>;

};



&mailbox5 {

	status = "okay";

	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {

		status = "okay";

	};

	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {

		status = "okay";

	};

};



&mailbox6 {

	status = "okay";

	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {

		status = "okay";

	};

	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {

		status = "okay";

	};

};

arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts

0 → 100644
+24 −0
Original line number Diff line number Diff line 
/*

 * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

 */



#include "am57xx-beagle-x15-common.dtsi"



/ {

	model = "TI AM5728 BeagleBoard-X15 rev B1";

};



&tpd12s015 {

	gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,	/* gpio7_10, CT CP HPD */

		<&gpio2 30 GPIO_ACTIVE_HIGH>,	/* gpio2_30, LS OE */

		<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */

};



&mmc1 {

	vmmc-supply = <&vdd_3v3>;

	vmmc-aux-supply = <&ldo1_reg>;

};

CRA Git | Maintained and supported by SUSTech CRA and CCSE