Gitlab 现已全面支持 git over ssh 与 git over https。通过 HTTPS 访问请配置带有 read_repository / write_repository 权限的 Personal access token。通过 SSH 端口访问请使用 22 端口或 13389 端口。如果使用CAS注册了账户但不知道密码，可以自行至设置中更改；如有其他问题，请发邮件至 service@cra.moe 寻求协助。

Commit 71a0151c authored Oct 21, 2015 by Sudeep Holla Committed by Rob Herring Oct 30, 2015

Documentation: devicetree: fix reference to legacy wakeup properties

This patch marks all the reference to the legacy wakeup bindings
and replaces them with the standard "wakeup-source" property.

All these legacy property are also listed under a separate section in
the generic wakeup-source binding document.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>

parent a68eee4c

Documentation/devicetree/bindings/crypto/fsl-sec4.txt

+2 −2

Original line number	Original line	Diff line number	Diff line
	@@ -441,7 +441,7 @@ EXAMPLE:
	regmap = <&snvs>;		regmap = <&snvs>;
	interrupts = <0 4 0x4>		interrupts = <0 4 0x4>
	linux,keycode = <116>; /* KEY_POWER */		linux,keycode = <116>; /* KEY_POWER */
	wakeup;		wakeup-source;
	};		};

	=====================================================================		=====================================================================
	@@ -530,7 +530,7 @@ FULL EXAMPLE
	regmap = <&sec_mon>;		regmap = <&sec_mon>;
	interrupts = <0 4 0x4>;		interrupts = <0 4 0x4>;
	linux,keycode = <116>; /* KEY_POWER */		linux,keycode = <116>; /* KEY_POWER */
	wakeup;		wakeup-source;
	};		};
	};		};

Documentation/devicetree/bindings/input/ads7846.txt

+2 −1

Original line number	Original line	Diff line number	Diff line
	@@ -65,6 +65,7 @@ Optional properties:
	pendown-gpio GPIO handle describing the pin the !PENIRQ		pendown-gpio GPIO handle describing the pin the !PENIRQ
	line is connected to.		line is connected to.
	wakeup-source use any event on touchscreen as wakeup event.		wakeup-source use any event on touchscreen as wakeup event.
			(Legacy property support: "linux,wakeup")


	Example for a TSC2046 chip connected to an McSPI controller of an OMAP SoC::		Example for a TSC2046 chip connected to an McSPI controller of an OMAP SoC::
	@@ -86,6 +87,6 @@ Example for a TSC2046 chip connected to an McSPI controller of an OMAP SoC::
	ti,x-plate-ohms = /bits/ 16 <40>;		ti,x-plate-ohms = /bits/ 16 <40>;
	ti,pressure-max = /bits/ 16 <255>;		ti,pressure-max = /bits/ 16 <255>;

	linux,wakeup;		wakeup-source;
	};		};
	};		};

Documentation/devicetree/bindings/input/gpio-keys-polled.txt

+1 −0

Original line number	Original line	Diff line number	Diff line
	@@ -21,6 +21,7 @@ Optional subnode-properties:
	- debounce-interval: Debouncing interval time in milliseconds.		- debounce-interval: Debouncing interval time in milliseconds.
	If not specified defaults to 5.		If not specified defaults to 5.
	- wakeup-source: Boolean, button can wake-up the system.		- wakeup-source: Boolean, button can wake-up the system.
			(Legacy property supported: "gpio-key,wakeup")

	Example nodes:		Example nodes:

Documentation/devicetree/bindings/input/gpio-keys.txt

+1 −0

Original line number	Original line	Diff line number	Diff line
	@@ -24,6 +24,7 @@ Optional subnode-properties:
	- debounce-interval: Debouncing interval time in milliseconds.		- debounce-interval: Debouncing interval time in milliseconds.
	If not specified defaults to 5.		If not specified defaults to 5.
	- wakeup-source: Boolean, button can wake-up the system.		- wakeup-source: Boolean, button can wake-up the system.
			(Legacy property supported: "gpio-key,wakeup")
	- linux,can-disable: Boolean, indicates that button is connected		- linux,can-disable: Boolean, indicates that button is connected
	to dedicated (not shared) interrupt which can be disabled to		to dedicated (not shared) interrupt which can be disabled to
	suppress events from the button.		suppress events from the button.

Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt

+1 −0

Original line number	Original line	Diff line number	Diff line
	@@ -20,6 +20,7 @@ Required Properties:
	Optional Properties:		Optional Properties:
	- linux,no-autorepeat: do no enable autorepeat feature.		- linux,no-autorepeat: do no enable autorepeat feature.
	- wakeup-source: use any event on keypad as wakeup event.		- wakeup-source: use any event on keypad as wakeup event.
			(Legacy property supported: "linux,wakeup")
	- debounce-delay-ms: debounce interval in milliseconds		- debounce-delay-ms: debounce interval in milliseconds
	- col-scan-delay-us: delay, measured in microseconds, that is needed		- col-scan-delay-us: delay, measured in microseconds, that is needed
	before we can scan keypad after activating column gpio		before we can scan keypad after activating column gpio

CRA Git | Maintained and supported by SUSTech CRA and CCSE