ARM: dts: aspeed-romulus: Update Romulus system (70c6351f) · Commits · 戴 / test

arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts

+126 −7

Original line number	Diff line number	Diff line
		// SPDX-License-Identifier: GPL-2.0+
		/dts-v1/;

		#include "aspeed-g5.dtsi"
		#include <dt-bindings/gpio/aspeed-gpio.h>

		/ {
		model = "Romulus BMC";
		compatible = "ibm,romulus-bmc", "aspeed,ast2500";

		aliases {
		serial4 = &uart5;
		};

		chosen {
		stdout-path = &uart5;
		bootargs = "console=ttyS4,115200 earlyprintk";
		};

		memory {
		reg = <0x80000000 0x40000000>;
		memory@80000000 {
		reg = <0x80000000 0x20000000>;
		};

		reserved-memory {
		@@ -29,6 +25,49 @@
		no-map;
		reg = <0xbf000000 0x01000000>; /* 16M */
		};

		flash_memory: region@98000000 {
		no-map;
		reg = <0x98000000 0x04000000>; /* 64M */
		};
		};

		leds {
		compatible = "gpio-leds";

		fault {
		gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
		};

		identify {
		gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
		};

		power {
		gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
		};
		};

		fsi: gpio-fsi {
		compatible = "fsi-master-gpio", "fsi-master";
		#address-cells = <2>;
		#size-cells = <0>;

		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
		data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
		mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
		trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
		};

		gpio-keys {
		compatible = "gpio-keys";

		checkstop {
		label = "checkstop";
		gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
		linux,code = <ASPEED_GPIO(J, 2)>;
		};
		};
		};

		@@ -38,6 +77,7 @@
		status = "okay";
		m25p,fast-read;
		label = "bmc";
		#include "openbmc-flash-layout.dtsi"
		};
		};

		@@ -53,6 +93,12 @@
		};
		};

		&lpc_ctrl {
		status = "okay";
		memory-region = <&flash_memory>;
		flash = <&spi1>;
		};

		&uart1 {
		/* Rear RS-232 connector */
		status = "okay";
		@@ -81,6 +127,10 @@
		pinctrl-0 = <&pinctrl_rmii1_default>;
		};

		&i2c1 {
		status = "okay";
		};

		&i2c2 {
		status = "okay";
		};
		@@ -133,8 +183,77 @@

		&i2c12 {
		status = "okay";

		max31785@52 {
		compatible = "maxim,max31785";
		reg = <0x52>;
		};
		};

		&gpio {
		nic_func_mode0 {
		gpio-hog;
		gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
		output-low;
		line-name = "nic_func_mode0";
		};
		nic_func_mode1 {
		gpio-hog;
		gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
		output-low;
		line-name = "nic_func_mode1";
		};
		};

		&vuart {
		status = "okay";
		};

		&gfx {
		status = "okay";
		};

		&pinctrl {
		aspeed,external-nodes = <&gfx &lhc>;
		};

		&pwm_tacho {
		status = "okay";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;

		fan@0 {
		reg = <0x00>;
		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
		};

		fan@1 {
		reg = <0x00>;
		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
		};

		fan@2 {
		reg = <0x01>;
		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
		};

		fan@3 {
		reg = <0x01>;
		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
		};

		fan@4 {
		reg = <0x00>;
		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
		};

		fan@5 {
		reg = <0x00>;
		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
		};

		fan@6 {
		reg = <0x01>;
		aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
		};
		};

Admin message