Commit 6f3b414a authored by Nick Kossifidis's avatar Nick Kossifidis Committed by John W. Linville
Browse files

ath5k: Update gain_F calibration code and add documentation 



 * Update and cleanup rf gain optimization code

 * Add comments and refferences to docs and use sane function names

 * Use only step index on ath5k_gain, no need to have a pointer to
   the current step since we can determine te step from it's index,
   this also allows us to put all other structs on rfgain.h and cleanup
   ath5k.h a little

 * No need for ah_rfgain variable, we use ah_gain.g_state for everything

 * Tested on RF2112B chip but gain_F calibration is not yet done
   (we will finish this on the next patch where we'll rewrite rf-buffer
   handling)

 * Use initial rf gain settings for 2316 and 2317 SoCs introduced on a previous patch

 It seems big but it's mostly cleanup, very few functional changes have been made on phy.c

  Signed-off-by: default avatarNick Kossifidis <mickflemm@gmail.com>

Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 33a31826

drivers/net/wireless/ath5k/ath5k.h

+11 −40
Original line number Diff line number Diff line
@@ -649,49 +649,21 @@ struct ath5k_beacon_state { 


enum ath5k_rfgain {

	AR5K_RFGAIN_INACTIVE = 0,

	AR5K_RFGAIN_ACTIVE,

	AR5K_RFGAIN_READ_REQUESTED,

	AR5K_RFGAIN_NEED_CHANGE,

};



#define AR5K_GAIN_CRN_FIX_BITS_5111		4

#define AR5K_GAIN_CRN_FIX_BITS_5112		7

#define AR5K_GAIN_CRN_MAX_FIX_BITS		AR5K_GAIN_CRN_FIX_BITS_5112

#define AR5K_GAIN_DYN_ADJUST_HI_MARGIN		15

#define AR5K_GAIN_DYN_ADJUST_LO_MARGIN		20

#define AR5K_GAIN_CCK_PROBE_CORR		5

#define AR5K_GAIN_CCK_OFDM_GAIN_DELTA		15

#define AR5K_GAIN_STEP_COUNT			10

#define AR5K_GAIN_PARAM_TX_CLIP			0

#define AR5K_GAIN_PARAM_PD_90			1

#define AR5K_GAIN_PARAM_PD_84			2

#define AR5K_GAIN_PARAM_GAIN_SEL		3

#define AR5K_GAIN_PARAM_MIX_ORN			0

#define AR5K_GAIN_PARAM_PD_138			1

#define AR5K_GAIN_PARAM_PD_137			2

#define AR5K_GAIN_PARAM_PD_136			3

#define AR5K_GAIN_PARAM_PD_132			4

#define AR5K_GAIN_PARAM_PD_131			5

#define AR5K_GAIN_PARAM_PD_130			6

#define AR5K_GAIN_CHECK_ADJUST(_g) 		\

	((_g)->g_current <= (_g)->g_low || (_g)->g_current >= (_g)->g_high)



struct ath5k_gain_opt_step {

	s16				gos_param[AR5K_GAIN_CRN_MAX_FIX_BITS];

	s32				gos_gain;

};



struct ath5k_gain {

	u32			g_step_idx;

	u32			g_current;

	u32			g_target;

	u32			g_low;

	u32			g_high;

	u32			g_f_corr;

	u32			g_active;

	const struct ath5k_gain_opt_step	*g_step;

	u8			g_step_idx;

	u8			g_current;

	u8			g_target;

	u8			g_low;

	u8			g_high;

	u8			g_f_corr;

	u8			g_state;

};





/********************\

  COMMON DEFINITIONS

\********************/
@@ -1053,7 +1025,6 @@ struct ath5k_hw { 
	bool			ah_running;

	bool			ah_single_chip;

	bool			ah_combined_mic;

	enum ath5k_rfgain	ah_rf_gain;



	u32			ah_mac_srev;

	u16			ah_mac_version;
@@ -1262,9 +1233,9 @@ extern int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_cha 


/* Initialize RF */

extern int ath5k_hw_rfregs(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int mode);

extern int ath5k_hw_rfgain(struct ath5k_hw *ah, unsigned int freq);

extern enum ath5k_rfgain ath5k_hw_get_rf_gain(struct ath5k_hw *ah);

extern int ath5k_hw_set_rfgain_opt(struct ath5k_hw *ah);

extern int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq);

extern enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah);

extern int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah);

/* PHY/RF channel functions */

extern bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags);

extern int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel);

drivers/net/wireless/ath5k/attach.c

+1 −1
Original line number Diff line number Diff line
@@ -331,7 +331,7 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version) 
	ath5k_hw_set_associd(ah, ah->ah_bssid, 0);

	ath5k_hw_set_opmode(ah);



	ath5k_hw_set_rfgain_opt(ah);

	ath5k_hw_rfgain_opt_init(ah);



	return ah;

err_free:

drivers/net/wireless/ath5k/base.c

+1 −1
Original line number Diff line number Diff line
@@ -2518,7 +2518,7 @@ ath5k_calibrate(unsigned long data) 
		ieee80211_frequency_to_channel(sc->curchan->center_freq),

		sc->curchan->hw_value);



	if (ath5k_hw_get_rf_gain(ah) == AR5K_RFGAIN_NEED_CHANGE) {

	if (ath5k_hw_gainf_calibrate(ah) == AR5K_RFGAIN_NEED_CHANGE) {

		/*

		 * Rfgain is out of bounds, reset the chip

		 * to load new gain values.

drivers/net/wireless/ath5k/phy.c

+264 −139
Original line number Diff line number Diff line
@@ -78,10 +78,104 @@ static unsigned int ath5k_hw_rfregs_op(u32 *rf, u32 offset, u32 reg, u32 bits, 
	return data;

}



static u32 ath5k_hw_rfregs_gainf_corr(struct ath5k_hw *ah)

/**********************\

* RF Gain optimization *

\**********************/



/*

 * This code is used to optimize rf gain on different environments

 * (temprature mostly) based on feedback from a power detector.

 *

 * It's only used on RF5111 and RF5112, later RF chips seem to have

 * auto adjustment on hw -notice they have a much smaller BANK 7 and

 * no gain optimization ladder-.

 *

 * For more infos check out this patent doc

 * http://www.freepatentsonline.com/7400691.html

 *

 * This paper describes power drops as seen on the receiver due to

 * probe packets

 * http://www.cnri.dit.ie/publications/ICT08%20-%20Practical%20Issues

 * %20of%20Power%20Control.pdf

 *

 * And this is the MadWiFi bug entry related to the above

 * http://madwifi-project.org/ticket/1659

 * with various measurements and diagrams

 *

 * TODO: Deal with power drops due to probes by setting an apropriate

 * tx power on the probe packets ! Make this part of the calibration process.

 */



/* Initialize ah_gain durring attach */

int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah)

{

	/* Initialize the gain optimization values */

	switch (ah->ah_radio) {

	case AR5K_RF5111:

		ah->ah_gain.g_step_idx = rfgain_opt_5111.go_default;

		ah->ah_gain.g_low = 20;

		ah->ah_gain.g_high = 35;

		ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE;

		break;

	case AR5K_RF5112:

		ah->ah_gain.g_step_idx = rfgain_opt_5112.go_default;

		ah->ah_gain.g_low = 20;

		ah->ah_gain.g_high = 85;

		ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE;

		break;

	default:

		return -EINVAL;

	}



	return 0;

}



/* Schedule a gain probe check on the next transmited packet.

 * That means our next packet is going to be sent with lower

 * tx power and a Peak to Average Power Detector (PAPD) will try

 * to measure the gain.

 *

 * TODO: Use propper tx power setting for the probe packet so

 * that we don't observe a serious power drop on the receiver

 *

 * XXX:  How about forcing a tx packet (bypassing PCU arbitrator etc)

 * just after we enable the probe so that we don't mess with

 * standard traffic ? Maybe it's time to use sw interrupts and

 * a probe tasklet !!!

 */

static void ath5k_hw_request_rfgain_probe(struct ath5k_hw *ah)

{



	/* Skip if gain calibration is inactive or

	 * we already handle a probe request */

	if (ah->ah_gain.g_state != AR5K_RFGAIN_ACTIVE)

		return;



	ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txpower.txp_max,

			AR5K_PHY_PAPD_PROBE_TXPOWER) |

			AR5K_PHY_PAPD_PROBE_TX_NEXT, AR5K_PHY_PAPD_PROBE);



	ah->ah_gain.g_state = AR5K_RFGAIN_READ_REQUESTED;



}



/* Calculate gain_F measurement correction

 * based on the current step for RF5112 rev. 2 */

static u32 ath5k_hw_rf_gainf_corr(struct ath5k_hw *ah)

{

	u32 mix, step;

	u32 *rf;

	const struct ath5k_gain_opt *go;

	const struct ath5k_gain_opt_step *g_step;



	/* Only RF5112 Rev. 2 supports it */

	if ((ah->ah_radio != AR5K_RF5112) ||

	(ah->ah_radio_5ghz_revision <= AR5K_SREV_RAD_5112A))

		return 0;



	go = &rfgain_opt_5112;



	g_step = &go->go_step[ah->ah_gain.g_step_idx];



	if (ah->ah_rf_banks == NULL)

		return 0;
@@ -89,11 +183,15 @@ static u32 ath5k_hw_rfregs_gainf_corr(struct ath5k_hw *ah) 
	rf = ah->ah_rf_banks;

	ah->ah_gain.g_f_corr = 0;



	/* No VGA (Variable Gain Amplifier) override, skip */

	if (ath5k_hw_rfregs_op(rf, ah->ah_offset[7], 0, 1, 36, 0, false) != 1)

		return 0;



	/* Mix gain stepping */

	step = ath5k_hw_rfregs_op(rf, ah->ah_offset[7], 0, 4, 32, 0, false);

	mix = ah->ah_gain.g_step->gos_param[0];



	/* Mix gain override */

	mix = g_step->gos_param[0];



	switch (mix) {

	case 3:
@@ -113,9 +211,13 @@ static u32 ath5k_hw_rfregs_gainf_corr(struct ath5k_hw *ah) 
	return ah->ah_gain.g_f_corr;

}



static bool ath5k_hw_rfregs_gain_readback(struct ath5k_hw *ah)

/* Check if current gain_F measurement is in the range of our

 * power detector windows. If we get a measurement outside range

 * we know it's not accurate (detectors can't measure anything outside

 * their detection window) so we must ignore it */

static bool ath5k_hw_rf_check_gainf_readback(struct ath5k_hw *ah)

{

	u32 step, mix, level[4];

	u32 step, mix_ovr, level[4];

	u32 *rf;



	if (ah->ah_rf_banks == NULL)
@@ -127,20 +229,20 @@ static bool ath5k_hw_rfregs_gain_readback(struct ath5k_hw *ah) 
		step = ath5k_hw_rfregs_op(rf, ah->ah_offset[7], 0, 6, 37, 0,

				false);

		level[0] = 0;

		level[1] = (step == 0x3f) ? 0x32 : step + 4;

		level[2] = (step != 0x3f) ? 0x40 : level[0];

		level[3] = level[2] + 0x32;

		level[1] = (step == 63) ? 50 : step + 4;

		level[2] = (step != 63) ? 64 : level[0];

		level[3] = level[2] + 50 ;



		ah->ah_gain.g_high = level[3] -

			(step == 0x3f ? AR5K_GAIN_DYN_ADJUST_HI_MARGIN : -5);

			(step == 63 ? AR5K_GAIN_DYN_ADJUST_HI_MARGIN : -5);

		ah->ah_gain.g_low = level[0] +

			(step == 0x3f ? AR5K_GAIN_DYN_ADJUST_LO_MARGIN : 0);

			(step == 63 ? AR5K_GAIN_DYN_ADJUST_LO_MARGIN : 0);

	} else {

		mix = ath5k_hw_rfregs_op(rf, ah->ah_offset[7], 0, 1, 36, 0,

		mix_ovr = ath5k_hw_rfregs_op(rf, ah->ah_offset[7], 0, 1, 36, 0,

				false);

		level[0] = level[2] = 0;



		if (mix == 1) {

		if (mix_ovr == 1) {

			level[1] = level[3] = 83;

		} else {

			level[1] = level[3] = 107;
@@ -154,9 +256,12 @@ static bool ath5k_hw_rfregs_gain_readback(struct ath5k_hw *ah) 
			ah->ah_gain.g_current <= level[3]);

}



static s32 ath5k_hw_rfregs_gain_adjust(struct ath5k_hw *ah)

/* Perform gain_F adjustment by choosing the right set

 * of parameters from rf gain optimization ladder */

static s8 ath5k_hw_rf_gainf_adjust(struct ath5k_hw *ah)

{

	const struct ath5k_gain_opt *go;

	const struct ath5k_gain_opt_step *g_step;

	int ret = 0;



	switch (ah->ah_radio) {
@@ -170,35 +275,39 @@ static s32 ath5k_hw_rfregs_gain_adjust(struct ath5k_hw *ah) 
		return 0;

	}



	ah->ah_gain.g_step = &go->go_step[ah->ah_gain.g_step_idx];

	g_step = &go->go_step[ah->ah_gain.g_step_idx];



	if (ah->ah_gain.g_current >= ah->ah_gain.g_high) {



		/* Reached maximum */

		if (ah->ah_gain.g_step_idx == 0)

			return -1;



		for (ah->ah_gain.g_target = ah->ah_gain.g_current;

				ah->ah_gain.g_target >=  ah->ah_gain.g_high &&

				ah->ah_gain.g_step_idx > 0;

				ah->ah_gain.g_step =

					&go->go_step[ah->ah_gain.g_step_idx])

				g_step = &go->go_step[ah->ah_gain.g_step_idx])

			ah->ah_gain.g_target -= 2 *

			    (go->go_step[--(ah->ah_gain.g_step_idx)].gos_gain -

			    ah->ah_gain.g_step->gos_gain);

			    g_step->gos_gain);



		ret = 1;

		goto done;

	}



	if (ah->ah_gain.g_current <= ah->ah_gain.g_low) {



		/* Reached minimum */

		if (ah->ah_gain.g_step_idx == (go->go_steps_count - 1))

			return -2;



		for (ah->ah_gain.g_target = ah->ah_gain.g_current;

				ah->ah_gain.g_target <= ah->ah_gain.g_low &&

				ah->ah_gain.g_step_idx < go->go_steps_count-1;

				ah->ah_gain.g_step =

					&go->go_step[ah->ah_gain.g_step_idx])

				g_step = &go->go_step[ah->ah_gain.g_step_idx])

			ah->ah_gain.g_target -= 2 *

			    (go->go_step[++ah->ah_gain.g_step_idx].gos_gain -

			    ah->ah_gain.g_step->gos_gain);

			    g_step->gos_gain);



		ret = 2;

		goto done;
@@ -213,6 +322,135 @@ done: 
	return ret;

}



/* Main callback for thermal rf gain calibration engine

 * Check for a new gain reading and schedule an adjustment

 * if needed.

 *

 * TODO: Use sw interrupt to schedule reset if gain_F needs

 * adjustment */

enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah)

{

	u32 data, type;

	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;



	ATH5K_TRACE(ah->ah_sc);



	if (ah->ah_rf_banks == NULL ||

	ah->ah_gain.g_state == AR5K_RFGAIN_INACTIVE)

		return AR5K_RFGAIN_INACTIVE;



	/* No check requested, either engine is inactive

	 * or an adjustment is already requested */

	if (ah->ah_gain.g_state != AR5K_RFGAIN_READ_REQUESTED)

		goto done;



	/* Read the PAPD (Peak to Average Power Detector)

	 * register */

	data = ath5k_hw_reg_read(ah, AR5K_PHY_PAPD_PROBE);



	/* No probe is scheduled, read gain_F measurement */

	if (!(data & AR5K_PHY_PAPD_PROBE_TX_NEXT)) {

		ah->ah_gain.g_current = data >> AR5K_PHY_PAPD_PROBE_GAINF_S;

		type = AR5K_REG_MS(data, AR5K_PHY_PAPD_PROBE_TYPE);



		/* If tx packet is CCK correct the gain_F measurement

		 * by cck ofdm gain delta */

		if (type == AR5K_PHY_PAPD_PROBE_TYPE_CCK) {

			if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_5112A)

				ah->ah_gain.g_current +=

					ee->ee_cck_ofdm_gain_delta;

			else

				ah->ah_gain.g_current +=

					AR5K_GAIN_CCK_PROBE_CORR;

		}



		/* Further correct gain_F measurement for

		 * RF5112A radios */

		if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_5112A) {

			ath5k_hw_rf_gainf_corr(ah);

			ah->ah_gain.g_current =

				ah->ah_gain.g_current >= ah->ah_gain.g_f_corr ?

				(ah->ah_gain.g_current-ah->ah_gain.g_f_corr) :

				0;

		}



		/* Check if measurement is ok and if we need

		 * to adjust gain, schedule a gain adjustment,

		 * else switch back to the acive state */

		if (ath5k_hw_rf_check_gainf_readback(ah) &&

		AR5K_GAIN_CHECK_ADJUST(&ah->ah_gain) &&

		ath5k_hw_rf_gainf_adjust(ah)) {

			ah->ah_gain.g_state = AR5K_RFGAIN_NEED_CHANGE;

		} else {

			ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE;

		}

	}



done:

	return ah->ah_gain.g_state;

}



/* Write initial rf gain table to set the RF sensitivity

 * this one works on all RF chips and has nothing to do

 * with gain_F calibration */

int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq)

{

	const struct ath5k_ini_rfgain *ath5k_rfg;

	unsigned int i, size;



	switch (ah->ah_radio) {

	case AR5K_RF5111:

		ath5k_rfg = rfgain_5111;

		size = ARRAY_SIZE(rfgain_5111);

		break;

	case AR5K_RF5112:

		ath5k_rfg = rfgain_5112;

		size = ARRAY_SIZE(rfgain_5112);

		break;

	case AR5K_RF2413:

		ath5k_rfg = rfgain_2413;

		size = ARRAY_SIZE(rfgain_2413);

		break;

	case AR5K_RF2316:

		ath5k_rfg = rfgain_2316;

		size = ARRAY_SIZE(rfgain_2316);

		break;

	case AR5K_RF5413:

		ath5k_rfg = rfgain_5413;

		size = ARRAY_SIZE(rfgain_5413);

		break;

	case AR5K_RF2317:

	case AR5K_RF2425:

		ath5k_rfg = rfgain_2425;

		size = ARRAY_SIZE(rfgain_2425);

		break;

	default:

		return -EINVAL;

	}



	switch (freq) {

	case AR5K_INI_RFGAIN_2GHZ:

	case AR5K_INI_RFGAIN_5GHZ:

		break;

	default:

		return -EINVAL;

	}



	for (i = 0; i < size; i++) {

		AR5K_REG_WAIT(i);

		ath5k_hw_reg_write(ah, ath5k_rfg[i].rfg_value[freq],

			(u32)ath5k_rfg[i].rfg_register);

	}



	return 0;

}







/********************\

* RF Registers setup *

\********************/



/*

 * Read EEPROM Calibration data, modify RF Banks and Initialize RF5111

 */
@@ -311,6 +549,8 @@ static int ath5k_hw_rf5111_rfregs(struct ath5k_hw *ah, 
		ath5k_hw_reg_write(ah, rf[i], rfb_5111[i].rfb_ctrl_register);

	}



	ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE;



	return 0;

}
@@ -407,6 +647,9 @@ static int ath5k_hw_rf5112_rfregs(struct ath5k_hw *ah, 
	for (i = 0; i < rf_size; i++)

		ath5k_hw_reg_write(ah, rf[i], rf_ini[i].rfb_ctrl_register);





	ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE;



	return 0;

}
@@ -536,125 +779,12 @@ int ath5k_hw_rfregs(struct ath5k_hw *ah, struct ieee80211_channel *channel, 
	}



	ret = func(ah, channel, mode);

	if (!ret)

		ah->ah_rf_gain = AR5K_RFGAIN_INACTIVE;



	return ret;

}



int ath5k_hw_rfgain(struct ath5k_hw *ah, unsigned int freq)

{

	const struct ath5k_ini_rfgain *ath5k_rfg;

	unsigned int i, size;



	switch (ah->ah_radio) {

	case AR5K_RF5111:

		ath5k_rfg = rfgain_5111;

		size = ARRAY_SIZE(rfgain_5111);

		break;

	case AR5K_RF5112:

		ath5k_rfg = rfgain_5112;

		size = ARRAY_SIZE(rfgain_5112);

		break;

	case AR5K_RF5413:

		ath5k_rfg = rfgain_5413;

		size = ARRAY_SIZE(rfgain_5413);

		break;

	case AR5K_RF2413:

		ath5k_rfg = rfgain_2413;

		size = ARRAY_SIZE(rfgain_2413);

		break;

	case AR5K_RF2425:

		ath5k_rfg = rfgain_2425;

		size = ARRAY_SIZE(rfgain_2425);

		break;

	default:

		return -EINVAL;

	}



	switch (freq) {

	case AR5K_INI_RFGAIN_2GHZ:

	case AR5K_INI_RFGAIN_5GHZ:

		break;

	default:

		return -EINVAL;

	}



	for (i = 0; i < size; i++) {

		AR5K_REG_WAIT(i);

		ath5k_hw_reg_write(ah, ath5k_rfg[i].rfg_value[freq],

			(u32)ath5k_rfg[i].rfg_register);

	}



	return 0;

}



enum ath5k_rfgain ath5k_hw_get_rf_gain(struct ath5k_hw *ah)

{

	u32 data, type;



	ATH5K_TRACE(ah->ah_sc);



	if (ah->ah_rf_banks == NULL || !ah->ah_gain.g_active ||

			ah->ah_version <= AR5K_AR5211)

		return AR5K_RFGAIN_INACTIVE;



	if (ah->ah_rf_gain != AR5K_RFGAIN_READ_REQUESTED)

		goto done;



	data = ath5k_hw_reg_read(ah, AR5K_PHY_PAPD_PROBE);



	if (!(data & AR5K_PHY_PAPD_PROBE_TX_NEXT)) {

		ah->ah_gain.g_current = data >> AR5K_PHY_PAPD_PROBE_GAINF_S;

		type = AR5K_REG_MS(data, AR5K_PHY_PAPD_PROBE_TYPE);



		if (type == AR5K_PHY_PAPD_PROBE_TYPE_CCK)

			ah->ah_gain.g_current += AR5K_GAIN_CCK_PROBE_CORR;



		if (ah->ah_radio >= AR5K_RF5112) {

			ath5k_hw_rfregs_gainf_corr(ah);

			ah->ah_gain.g_current =

				ah->ah_gain.g_current >= ah->ah_gain.g_f_corr ?

				(ah->ah_gain.g_current-ah->ah_gain.g_f_corr) :

				0;

		}



		if (ath5k_hw_rfregs_gain_readback(ah) &&

				AR5K_GAIN_CHECK_ADJUST(&ah->ah_gain) &&

				ath5k_hw_rfregs_gain_adjust(ah))

			ah->ah_rf_gain = AR5K_RFGAIN_NEED_CHANGE;

	}



done:

	return ah->ah_rf_gain;

}



int ath5k_hw_set_rfgain_opt(struct ath5k_hw *ah)

{

	/* Initialize the gain optimization values */

	switch (ah->ah_radio) {

	case AR5K_RF5111:

		ah->ah_gain.g_step_idx = rfgain_opt_5111.go_default;

		ah->ah_gain.g_step =

		    &rfgain_opt_5111.go_step[ah->ah_gain.g_step_idx];

		ah->ah_gain.g_low = 20;

		ah->ah_gain.g_high = 35;

		ah->ah_gain.g_active = 1;

		break;

	case AR5K_RF5112:

		ah->ah_gain.g_step_idx = rfgain_opt_5112.go_default;

		ah->ah_gain.g_step =

		    &rfgain_opt_5112.go_step[ah->ah_gain.g_step_idx];

		ah->ah_gain.g_low = 20;

		ah->ah_gain.g_high = 85;

		ah->ah_gain.g_active = 1;

		break;

	default:

		return -EINVAL;

	}



	return 0;

}



/**************************\

  PHY/RF channel functions
@@ -1176,13 +1306,8 @@ done: 
	 * as often as I/Q calibration.*/

	ath5k_hw_noise_floor_calibration(ah, channel->center_freq);



	/* Request RF gain */

	if (channel->hw_value & CHANNEL_5GHZ) {

		ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txpower.txp_max,

			AR5K_PHY_PAPD_PROBE_TXPOWER) |

			AR5K_PHY_PAPD_PROBE_TX_NEXT, AR5K_PHY_PAPD_PROBE);

		ah->ah_rf_gain = AR5K_RFGAIN_READ_REQUESTED;

	}

	/* Initiate a gain_F calibration */

	ath5k_hw_request_rfgain_probe(ah);



	return 0;

}

drivers/net/wireless/ath5k/reset.c

+1 −4
Original line number Diff line number Diff line
@@ -441,9 +441,6 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, 
	s_led[1] = ath5k_hw_reg_read(ah, AR5K_GPIOCR);

	s_led[2] = ath5k_hw_reg_read(ah, AR5K_GPIODO);



	if (change_channel && ah->ah_rf_banks != NULL)

		ath5k_hw_get_rf_gain(ah);





	/*Wakeup the device*/

	ret = ath5k_hw_nic_wakeup(ah, channel->hw_value, false);
@@ -530,7 +527,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, 
		 * Write initial RF gain settings

		 * This should work for both 5111/5112

		 */

		ret = ath5k_hw_rfgain(ah, freq);

		ret = ath5k_hw_rfgain_init(ah, freq);

		if (ret)

			return ret;

CRA Git | Maintained and supported by SUSTech CRA and CCSE