Commit 6f00a022 authored by Maxime Bizon's avatar Maxime Bizon Committed by David S. Miller
Browse files

bcm63xx_enet: add support for Broadcom BCM63xx integrated gigabit switch 



Newer Broadcom BCM63xx SoCs: 6328, 6362 and 6368 have an integrated switch
which needs to be driven slightly differently from the traditional
external switches. This patch introduces changes in arch/mips/bcm63xx in order
to:

- register a bcm63xx_enetsw driver instead of bcm63xx_enet driver
- update DMA channels configuration & state RAM base addresses
- add a new platform data configuration knob to define the number of
  ports per switch/device and force link on some ports
- define the required switch registers

On the driver side, the following changes are required:

- the switch ports need to be polled to ensure the link is up and
  running and RX/TX can properly work
- basic switch configuration needs to be performed for the switch to
  forward packets to the CPU
- update the MIB counters since the integrated

Signed-off-by: default avatarMaxime Bizon <mbizon@freebox.fr>
Signed-off-by: default avatarJonas Gorski <jogo@openwrt.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 0ae99b5f

arch/mips/bcm63xx/boards/board_bcm963xx.c

+4 −0
Original line number Diff line number Diff line
@@ -845,6 +845,10 @@ int __init board_register_devices(void) 
	    !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr))

		bcm63xx_enet_register(1, &board.enet1);



	if (board.has_enetsw &&

	    !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))

		bcm63xx_enetsw_register(&board.enetsw);



	if (board.has_usbd)

		bcm63xx_usbd_register(&board.usbd);

arch/mips/bcm63xx/dev-enet.c

+95 −18
Original line number Diff line number Diff line
@@ -104,38 +104,81 @@ static struct platform_device bcm63xx_enet1_device = { 
	},

};



int __init bcm63xx_enet_register(int unit,

				 const struct bcm63xx_enet_platform_data *pd)

static struct resource enetsw_res[] = {

	{

	struct platform_device *pdev;

	struct bcm63xx_enet_platform_data *dpd;

	int ret;

		/* start & end filled at runtime */

		.flags		= IORESOURCE_MEM,

	},

	{

		/* start filled at runtime */

		.flags		= IORESOURCE_IRQ,

	},

	{

		/* start filled at runtime */

		.flags		= IORESOURCE_IRQ,

	},

};



	if (unit > 1)

		return -ENODEV;

static struct bcm63xx_enetsw_platform_data enetsw_pd;



	if (unit == 1 && BCMCPU_IS_6338())

		return -ENODEV;

static struct platform_device bcm63xx_enetsw_device = {

	.name		= "bcm63xx_enetsw",

	.num_resources	= ARRAY_SIZE(enetsw_res),

	.resource	= enetsw_res,

	.dev		= {

		.platform_data = &enetsw_pd,

	},

};



static int __init register_shared(void)

{

	int ret, chan_count;



	if (shared_device_registered)

		return 0;



	if (!shared_device_registered) {

	shared_res[0].start = bcm63xx_regset_address(RSET_ENETDMA);

	shared_res[0].end = shared_res[0].start;

	shared_res[0].end += (RSET_ENETDMA_SIZE)  - 1;



	if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368())

		chan_count = 32;

	else

		chan_count = 16;



	shared_res[1].start = bcm63xx_regset_address(RSET_ENETDMAC);

	shared_res[1].end = shared_res[1].start;

		shared_res[1].end += RSET_ENETDMAC_SIZE(16)  - 1;

	shared_res[1].end += RSET_ENETDMAC_SIZE(chan_count)  - 1;



	shared_res[2].start = bcm63xx_regset_address(RSET_ENETDMAS);

	shared_res[2].end = shared_res[2].start;

		shared_res[2].end += RSET_ENETDMAS_SIZE(16)  - 1;

	shared_res[2].end += RSET_ENETDMAS_SIZE(chan_count)  - 1;



	ret = platform_device_register(&bcm63xx_enet_shared_device);

	if (ret)

		return ret;

	shared_device_registered = 1;



	return 0;

}



int __init bcm63xx_enet_register(int unit,

				 const struct bcm63xx_enet_platform_data *pd)

{

	struct platform_device *pdev;

	struct bcm63xx_enet_platform_data *dpd;

	int ret;



	if (unit > 1)

		return -ENODEV;



	if (unit == 1 && BCMCPU_IS_6338())

		return -ENODEV;



	ret = register_shared();

	if (ret)

		return ret;



	if (unit == 0) {

		enet0_res[0].start = bcm63xx_regset_address(RSET_ENET0);

		enet0_res[0].end = enet0_res[0].start;
@@ -175,3 +218,37 @@ int __init bcm63xx_enet_register(int unit, 
		return ret;

	return 0;

}



int __init

bcm63xx_enetsw_register(const struct bcm63xx_enetsw_platform_data *pd)

{

	int ret;



	if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())

		return -ENODEV;



	ret = register_shared();

	if (ret)

		return ret;



	enetsw_res[0].start = bcm63xx_regset_address(RSET_ENETSW);

	enetsw_res[0].end = enetsw_res[0].start;

	enetsw_res[0].end += RSET_ENETSW_SIZE - 1;

	enetsw_res[1].start = bcm63xx_get_irq_number(IRQ_ENETSW_RXDMA0);

	enetsw_res[2].start = bcm63xx_get_irq_number(IRQ_ENETSW_TXDMA0);

	if (!enetsw_res[2].start)

		enetsw_res[2].start = -1;



	memcpy(bcm63xx_enetsw_device.dev.platform_data, pd, sizeof(*pd));



	if (BCMCPU_IS_6328())

		enetsw_pd.num_ports = ENETSW_PORTS_6328;

	else if (BCMCPU_IS_6362() || BCMCPU_IS_6368())

		enetsw_pd.num_ports = ENETSW_PORTS_6368;



	ret = platform_device_register(&bcm63xx_enetsw_device);

	if (ret)

		return ret;



	return 0;

}

arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h

+28 −0
Original line number Diff line number Diff line
@@ -39,7 +39,35 @@ struct bcm63xx_enet_platform_data { 
					    int phy_id, int reg, int val));

};



/*

 * on board ethernet switch platform data

 */

#define ENETSW_MAX_PORT	8

#define ENETSW_PORTS_6328 5 /* 4 FE PHY + 1 RGMII */

#define ENETSW_PORTS_6368 6 /* 4 FE PHY + 2 RGMII */



#define ENETSW_RGMII_PORT0	4



struct bcm63xx_enetsw_port {

	int		used;

	int		phy_id;



	int		bypass_link;

	int		force_speed;

	int		force_duplex_full;



	const char	*name;

};



struct bcm63xx_enetsw_platform_data {

	char mac_addr[ETH_ALEN];

	int num_ports;

	struct bcm63xx_enetsw_port used_ports[ENETSW_MAX_PORT];

};



int __init bcm63xx_enet_register(int unit,

				 const struct bcm63xx_enet_platform_data *pd);



int bcm63xx_enetsw_register(const struct bcm63xx_enetsw_platform_data *pd);



#endif /* ! BCM63XX_DEV_ENET_H_ */

arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h

+50 −0
Original line number Diff line number Diff line
@@ -830,10 +830,60 @@ 
 * _REG relative to RSET_ENETSW

 *************************************************************************/



/* Port traffic control */

#define ENETSW_PTCTRL_REG(x)		(0x0 + (x))

#define ENETSW_PTCTRL_RXDIS_MASK	(1 << 0)

#define ENETSW_PTCTRL_TXDIS_MASK	(1 << 1)



/* Switch mode register */

#define ENETSW_SWMODE_REG		(0xb)

#define ENETSW_SWMODE_FWD_EN_MASK	(1 << 1)



/* IMP override Register */

#define ENETSW_IMPOV_REG		(0xe)

#define ENETSW_IMPOV_FORCE_MASK		(1 << 7)

#define ENETSW_IMPOV_TXFLOW_MASK	(1 << 5)

#define ENETSW_IMPOV_RXFLOW_MASK	(1 << 4)

#define ENETSW_IMPOV_1000_MASK		(1 << 3)

#define ENETSW_IMPOV_100_MASK		(1 << 2)

#define ENETSW_IMPOV_FDX_MASK		(1 << 1)

#define ENETSW_IMPOV_LINKUP_MASK	(1 << 0)



/* Port override Register */

#define ENETSW_PORTOV_REG(x)		(0x58 + (x))

#define ENETSW_PORTOV_ENABLE_MASK	(1 << 6)

#define ENETSW_PORTOV_TXFLOW_MASK	(1 << 5)

#define ENETSW_PORTOV_RXFLOW_MASK	(1 << 4)

#define ENETSW_PORTOV_1000_MASK		(1 << 3)

#define ENETSW_PORTOV_100_MASK		(1 << 2)

#define ENETSW_PORTOV_FDX_MASK		(1 << 1)

#define ENETSW_PORTOV_LINKUP_MASK	(1 << 0)



/* MDIO control register */

#define ENETSW_MDIOC_REG		(0xb0)

#define ENETSW_MDIOC_EXT_MASK		(1 << 16)

#define ENETSW_MDIOC_REG_SHIFT		20

#define ENETSW_MDIOC_PHYID_SHIFT	25

#define ENETSW_MDIOC_RD_MASK		(1 << 30)

#define ENETSW_MDIOC_WR_MASK		(1 << 31)



/* MDIO data register */

#define ENETSW_MDIOD_REG		(0xb4)



/* Global Management Configuration Register */

#define ENETSW_GMCR_REG			(0x200)

#define ENETSW_GMCR_RST_MIB_MASK	(1 << 0)



/* MIB register */

#define ENETSW_MIB_REG(x)		(0x2800 + (x) * 4)

#define ENETSW_MIB_REG_COUNT		47



/* Jumbo control register port mask register */

#define ENETSW_JMBCTL_PORT_REG		(0x4004)



/* Jumbo control mib good frame register */

#define ENETSW_JMBCTL_MAXSIZE_REG	(0x4008)





/*************************************************************************

 * _REG relative to RSET_OHCI_PRIV

arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h

+2 −0
Original line number Diff line number Diff line
@@ -24,6 +24,7 @@ struct board_info { 
	/* enabled feature/device */

	unsigned int	has_enet0:1;

	unsigned int	has_enet1:1;

	unsigned int	has_enetsw:1;

	unsigned int	has_pci:1;

	unsigned int	has_pccard:1;

	unsigned int	has_ohci0:1;
@@ -36,6 +37,7 @@ struct board_info { 
	/* ethernet config */

	struct bcm63xx_enet_platform_data enet0;

	struct bcm63xx_enet_platform_data enet1;

	struct bcm63xx_enetsw_platform_data enetsw;



	/* USB config */

	struct bcm63xx_usbd_platform_data usbd;

CRA Git | Maintained and supported by SUSTech CRA and CCSE