phy: qcom: Add Qualcomm PCIe2 PHY driver (6ef72bc0) · Commits · 戴 / test

drivers/phy/qualcomm/Kconfig

+8 −0

Original line number	Diff line number	Diff line
		@@ -24,6 +24,14 @@ config PHY_QCOM_IPQ806X_SATA
		depends on OF
		select GENERIC_PHY

		config PHY_QCOM_PCIE2
		tristate "Qualcomm PCIe Gen2 PHY Driver"
		depends on OF && COMMON_CLK && (ARCH_QCOM \|\| COMPILE_TEST)
		select GENERIC_PHY
		help
		Enable this to support the Qualcomm PCIe PHY, used with the Synopsys
		based PCIe controller.

		config PHY_QCOM_QMP
		tristate "Qualcomm QMP PHY Driver"
		depends on OF && COMMON_CLK && (ARCH_QCOM \|\| COMPILE_TEST)

drivers/phy/qualcomm/Makefile

+1 −0

Original line number	Diff line number	Diff line
		@@ -2,6 +2,7 @@
		obj-$(CONFIG_PHY_ATH79_USB) += phy-ath79-usb.o
		obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
		obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
		obj-$(CONFIG_PHY_QCOM_PCIE2) += phy-qcom-pcie2.o
		obj-$(CONFIG_PHY_QCOM_QMP) += phy-qcom-qmp.o
		obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o
		obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o

drivers/phy/qualcomm/phy-qcom-pcie2.c

0 → 100644

+331 −0

Original line number	Diff line number	Diff line
		// SPDX-License-Identifier: GPL-2.0
		/*
		* Copyright (c) 2014-2017, The Linux Foundation. All rights reserved.
		* Copyright (c) 2019, Linaro Ltd.
		*/

		#include <linux/clk-provider.h>
		#include <linux/clk.h>
		#include <linux/iopoll.h>
		#include <linux/module.h>
		#include <linux/phy/phy.h>
		#include <linux/platform_device.h>
		#include <linux/reset.h>
		#include <linux/slab.h>

		#include <dt-bindings/phy/phy.h>

		#define PCIE20_PARF_PHY_STTS 0x3c
		#define PCIE2_PHY_RESET_CTRL 0x44
		#define PCIE20_PARF_PHY_REFCLK_CTRL2 0xa0
		#define PCIE20_PARF_PHY_REFCLK_CTRL3 0xa4
		#define PCIE20_PARF_PCS_SWING_CTRL1 0x88
		#define PCIE20_PARF_PCS_SWING_CTRL2 0x8c
		#define PCIE20_PARF_PCS_DEEMPH1 0x74
		#define PCIE20_PARF_PCS_DEEMPH2 0x78
		#define PCIE20_PARF_PCS_DEEMPH3 0x7c
		#define PCIE20_PARF_CONFIGBITS 0x84
		#define PCIE20_PARF_PHY_CTRL3 0x94
		#define PCIE20_PARF_PCS_CTRL 0x80

		#define TX_AMP_VAL 120
		#define PHY_RX0_EQ_GEN1_VAL 0
		#define PHY_RX0_EQ_GEN2_VAL 4
		#define TX_DEEMPH_GEN1_VAL 24
		#define TX_DEEMPH_GEN2_3_5DB_VAL 26
		#define TX_DEEMPH_GEN2_6DB_VAL 36
		#define PHY_TX0_TERM_OFFST_VAL 0

		struct qcom_phy {
		struct device *dev;
		void __iomem *base;

		struct regulator_bulk_data vregs[2];

		struct reset_control *phy_reset;
		struct reset_control *pipe_reset;
		struct clk *pipe_clk;
		};

		static int qcom_pcie2_phy_init(struct phy *phy)
		{
		struct qcom_phy *qphy = phy_get_drvdata(phy);
		int ret;

		ret = reset_control_deassert(qphy->phy_reset);
		if (ret) {
		dev_err(qphy->dev, "cannot deassert pipe reset\n");
		return ret;
		}

		ret = regulator_bulk_enable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
		if (ret)
		reset_control_assert(qphy->phy_reset);

		return ret;
		}

		static int qcom_pcie2_phy_power_on(struct phy *phy)
		{
		struct qcom_phy *qphy = phy_get_drvdata(phy);
		int ret;
		u32 val;

		/* Program REF_CLK source */
		val = readl(qphy->base + PCIE20_PARF_PHY_REFCLK_CTRL2);
		val &= ~BIT(1);
		writel(val, qphy->base + PCIE20_PARF_PHY_REFCLK_CTRL2);

		usleep_range(1000, 2000);

		/* Don't use PAD for refclock */
		val = readl(qphy->base + PCIE20_PARF_PHY_REFCLK_CTRL2);
		val &= ~BIT(0);
		writel(val, qphy->base + PCIE20_PARF_PHY_REFCLK_CTRL2);

		/* Program SSP ENABLE */
		val = readl(qphy->base + PCIE20_PARF_PHY_REFCLK_CTRL3);
		val \|= BIT(0);
		writel(val, qphy->base + PCIE20_PARF_PHY_REFCLK_CTRL3);

		usleep_range(1000, 2000);

		/* Assert Phy SW Reset */
		val = readl(qphy->base + PCIE2_PHY_RESET_CTRL);
		val \|= BIT(0);
		writel(val, qphy->base + PCIE2_PHY_RESET_CTRL);

		/* Program Tx Amplitude */
		val = readl(qphy->base + PCIE20_PARF_PCS_SWING_CTRL1);
		val &= ~0x7f;
		val \|= TX_AMP_VAL;
		writel(val, qphy->base + PCIE20_PARF_PCS_SWING_CTRL1);

		val = readl(qphy->base + PCIE20_PARF_PCS_SWING_CTRL2);
		val &= ~0x7f;
		val \|= TX_AMP_VAL;
		writel(val, qphy->base + PCIE20_PARF_PCS_SWING_CTRL2);

		/* Program De-Emphasis */
		val = readl(qphy->base + PCIE20_PARF_PCS_DEEMPH1);
		val &= ~0x3f;
		val \|= TX_DEEMPH_GEN2_6DB_VAL;
		writel(val, qphy->base + PCIE20_PARF_PCS_DEEMPH1);

		val = readl(qphy->base + PCIE20_PARF_PCS_DEEMPH2);
		val &= ~0x3f;
		val \|= TX_DEEMPH_GEN2_3_5DB_VAL;
		writel(val, qphy->base + PCIE20_PARF_PCS_DEEMPH2);

		val = readl(qphy->base + PCIE20_PARF_PCS_DEEMPH3);
		val &= ~0x3f;
		val \|= TX_DEEMPH_GEN1_VAL;
		writel(val, qphy->base + PCIE20_PARF_PCS_DEEMPH3);

		/* Program Rx_Eq */
		val = readl(qphy->base + PCIE20_PARF_CONFIGBITS);
		val &= ~0x7;
		val \|= PHY_RX0_EQ_GEN2_VAL;
		writel(val, qphy->base + PCIE20_PARF_CONFIGBITS);

		/* Program Tx0_term_offset */
		val = readl(qphy->base + PCIE20_PARF_PHY_CTRL3);
		val &= ~0x1f;
		val \|= PHY_TX0_TERM_OFFST_VAL;
		writel(val, qphy->base + PCIE20_PARF_PHY_CTRL3);

		/* disable Tx2Rx Loopback */
		val = readl(qphy->base + PCIE20_PARF_PCS_CTRL);
		val &= ~BIT(1);
		writel(val, qphy->base + PCIE20_PARF_PCS_CTRL);

		/* De-assert Phy SW Reset */
		val = readl(qphy->base + PCIE2_PHY_RESET_CTRL);
		val &= ~BIT(0);
		writel(val, qphy->base + PCIE2_PHY_RESET_CTRL);

		usleep_range(1000, 2000);

		ret = reset_control_deassert(qphy->pipe_reset);
		if (ret) {
		dev_err(qphy->dev, "cannot deassert pipe reset\n");
		goto out;
		}

		clk_set_rate(qphy->pipe_clk, 250000000);

		ret = clk_prepare_enable(qphy->pipe_clk);
		if (ret) {
		dev_err(qphy->dev, "failed to enable pipe clock\n");
		goto out;
		}

		ret = readl_poll_timeout(qphy->base + PCIE20_PARF_PHY_STTS, val,
		!(val & BIT(0)), 1000, 10);
		if (ret)
		dev_err(qphy->dev, "phy initialization failed\n");

		out:
		return ret;
		}

		static int qcom_pcie2_phy_power_off(struct phy *phy)
		{
		struct qcom_phy *qphy = phy_get_drvdata(phy);
		u32 val;

		val = readl(qphy->base + PCIE2_PHY_RESET_CTRL);
		val \|= BIT(0);
		writel(val, qphy->base + PCIE2_PHY_RESET_CTRL);

		clk_disable_unprepare(qphy->pipe_clk);
		reset_control_assert(qphy->pipe_reset);

		return 0;
		}

		static int qcom_pcie2_phy_exit(struct phy *phy)
		{
		struct qcom_phy *qphy = phy_get_drvdata(phy);

		regulator_bulk_disable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
		reset_control_assert(qphy->phy_reset);

		return 0;
		}

		static const struct phy_ops qcom_pcie2_ops = {
		.init = qcom_pcie2_phy_init,
		.power_on = qcom_pcie2_phy_power_on,
		.power_off = qcom_pcie2_phy_power_off,
		.exit = qcom_pcie2_phy_exit,
		.owner = THIS_MODULE,
		};

		/*
		* Register a fixed rate pipe clock.
		*
		* The <s>_pipe_clksrc generated by PHY goes to the GCC that gate
		* controls it. The <s>_pipe_clk coming out of the GCC is requested
		* by the PHY driver for its operations.
		* We register the <s>_pipe_clksrc here. The gcc driver takes care
		* of assigning this <s>_pipe_clksrc as parent to <s>_pipe_clk.
		* Below picture shows this relationship.
		*
		* +---------------+
		* \| PHY block \|<<---------------------------------------+
		* \| \| \|
		* \| +-------+ \| +-----+ \|
		* I/P---^-->\| PLL \|---^--->pipe_clksrc--->\| GCC \|--->pipe_clk---+
		* clk \| +-------+ \| +-----+
		* +---------------+
		*/
		static int phy_pipe_clksrc_register(struct qcom_phy *qphy)
		{
		struct device_node *np = qphy->dev->of_node;
		struct clk_fixed_rate *fixed;
		struct clk_init_data init = { };
		int ret;

		ret = of_property_read_string(np, "clock-output-names", &init.name);
		if (ret) {
		dev_err(qphy->dev, "%s: No clock-output-names\n", np->name);
		return ret;
		}

		fixed = devm_kzalloc(qphy->dev, sizeof(*fixed), GFP_KERNEL);
		if (!fixed)
		return -ENOMEM;

		init.ops = &clk_fixed_rate_ops;

		/* controllers using QMP phys use 250MHz pipe clock interface */
		fixed->fixed_rate = 250000000;
		fixed->hw.init = &init;

		return devm_clk_hw_register(qphy->dev, &fixed->hw);
		}

		static int qcom_pcie2_phy_probe(struct platform_device *pdev)
		{
		struct phy_provider *phy_provider;
		struct qcom_phy *qphy;
		struct resource *res;
		struct device *dev = &pdev->dev;
		struct phy *phy;
		int ret;

		qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL);
		if (!qphy)
		return -ENOMEM;

		qphy->dev = dev;

		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
		qphy->base = devm_ioremap_resource(dev, res);
		if (IS_ERR(qphy->base))
		return PTR_ERR(qphy->base);

		ret = phy_pipe_clksrc_register(qphy);
		if (ret) {
		dev_err(dev, "failed to register pipe_clk\n");
		return ret;
		}

		qphy->vregs[0].supply = "vdda-vp";
		qphy->vregs[1].supply = "vdda-vph";
		ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(qphy->vregs), qphy->vregs);
		if (ret < 0)
		return ret;

		qphy->pipe_clk = devm_clk_get(dev, NULL);
		if (IS_ERR(qphy->pipe_clk)) {
		dev_err(dev, "failed to acquire pipe clock\n");
		return PTR_ERR(qphy->pipe_clk);
		}

		qphy->phy_reset = devm_reset_control_get_exclusive(dev, "phy");
		if (IS_ERR(qphy->phy_reset)) {
		dev_err(dev, "failed to acquire phy reset\n");
		return PTR_ERR(qphy->phy_reset);
		}

		qphy->pipe_reset = devm_reset_control_get_exclusive(dev, "pipe");
		if (IS_ERR(qphy->pipe_reset)) {
		dev_err(dev, "failed to acquire pipe reset\n");
		return PTR_ERR(qphy->pipe_reset);
		}

		phy = devm_phy_create(dev, dev->of_node, &qcom_pcie2_ops);
		if (IS_ERR(phy)) {
		dev_err(dev, "failed to create phy\n");
		return PTR_ERR(phy);
		}

		phy_set_drvdata(phy, qphy);

		phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
		if (IS_ERR(phy_provider))
		dev_err(dev, "failed to register phy provider\n");

		return PTR_ERR_OR_ZERO(phy_provider);
		}

		static const struct of_device_id qcom_pcie2_phy_match_table[] = {
		{ .compatible = "qcom,pcie2-phy" },
		{}
		};
		MODULE_DEVICE_TABLE(of, qcom_pcie2_phy_match_table);

		static struct platform_driver qcom_pcie2_phy_driver = {
		.probe = qcom_pcie2_phy_probe,
		.driver = {
		.name = "phy-qcom-pcie2",
		.of_match_table = qcom_pcie2_phy_match_table,
		},
		};

		module_platform_driver(qcom_pcie2_phy_driver);

		MODULE_DESCRIPTION("Qualcomm PCIe PHY driver");
		MODULE_LICENSE("GPL v2");

Admin message