Merge remote-tracking branch 'regulator/for-next' into tmp (6dfae59d) · Commits · 戴 / test

Documentation/devicetree/bindings/regulator/mp886x.txt

0 → 100644

+27 −0

Original line number	Diff line number	Diff line
		Monolithic Power Systems MP8867/MP8869 voltage regulator

		Required properties:
		- compatible: Must be one of the following.
		"mps,mp8867"
		"mps,mp8869"
		- reg: I2C slave address.
		- enable-gpios: enable gpios.
		- mps,fb-voltage-divider: An array of two integers containing the resistor
		values R1 and R2 of the feedback voltage divider in kilo ohms.

		Any property defined as part of the core regulator binding, defined in
		./regulator.txt, can also be used.

		Example:

		vcpu: regulator@62 {
		compatible = "mps,mp8869";
		regulator-name = "vcpu";
		regulator-min-microvolt = <700000>;
		regulator-max-microvolt = <850000>;
		regulator-always-on;
		regulator-boot-on;
		enable-gpios = <&porta 1 GPIO_ACTIVE_LOW>;
		mps,fb-voltage-divider = <80 240>;
		reg = <0x62>;
		};

+13 −0

Original line number	Diff line number	Diff line
		@@ -26,6 +26,7 @@ Regulator nodes are identified by their compatible:
		"qcom,rpm-pm8994-regulators"
		"qcom,rpm-pm8998-regulators"
		"qcom,rpm-pma8084-regulators"
		"qcom,rpm-pmi8994-regulators"
		"qcom,rpm-pmi8998-regulators"
		"qcom,rpm-pms405-regulators"

		@@ -143,6 +144,15 @@ Regulator nodes are identified by their compatible:
		Definition: reference to regulator supplying the input pin, as
		described in the data sheet

		- vdd_s1-supply:
		- vdd_s2-supply:
		- vdd_s3-supply:
		- vdd_bst_byp-supply:
		Usage: optional (pmi8994 only)
		Value type: <phandle>
		Definition: reference to regulator supplying the input pin, as
		described in the data sheet

		- vdd_s1-supply:
		- vdd_s2-supply:
		- vdd_s3-supply:
		@@ -259,6 +269,9 @@ pma8084:
		l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20,
		l21, l22, l23, l24, l25, l26, l27, lvs1, lvs2, lvs3, lvs4, 5vs1

		pmi8994:
		s1, s2, s3, boost-bypass

		pmi8998:
		bob

0 → 100644

+42 −0

Original line number	Diff line number	Diff line
		# SPDX-License-Identifier: GPL-2.0
		%YAML 1.2
		---
		$id: http://devicetree.org/schemas/regulator/vqmmc-ipq4019-regulator.yaml#
		$schema: http://devicetree.org/meta-schemas/core.yaml#

		title: Qualcomm IPQ4019 VQMMC SD LDO regulator

		maintainers:
		- Robert Marko <robert.marko@sartura.hr>

		description: \|
		Qualcomm IPQ4019 SoC-s feature a built a build SD/EMMC controller,
		in order to support both 1.8 and 3V I/O voltage levels an LDO
		controller is also embedded.

		allOf:
		- $ref: "regulator.yaml#"

		properties:
		compatible:
		const: qcom,vqmmc-ipq4019-regulator

		reg:
		maxItems: 1

		required:
		- compatible
		- reg

		examples:
		- \|
		regulator@1948000 {
		compatible = "qcom,vqmmc-ipq4019-regulator";
		reg = <0x01948000 0x4>;
		regulator-name = "vqmmc";
		regulator-min-microvolt = <1500000>;
		regulator-max-microvolt = <3000000>;
		regulator-always-on;
		status = "disabled";
		};
		...

+7 −0

Original line number	Diff line number	Diff line
		@@ -635,6 +635,13 @@ config REGULATOR_MP8859
		Say M here if you want to include support for the regulator as a
		module. The module will be named "mp8859".

		config REGULATOR_MP886X
		tristate "MPS MP8869 regulator driver"
		depends on I2C && (OF \|\| COMPILE_TEST)
		select REGMAP_I2C
		help
		This driver supports the MP8869 voltage regulator.

		config REGULATOR_MPQ7920
		tristate "Monolithic MPQ7920 PMIC"
		depends on I2C && OF

+1 −0

Original line number	Diff line number	Diff line
		@@ -80,6 +80,7 @@ obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
		obj-$(CONFIG_REGULATOR_MCP16502) += mcp16502.o
		obj-$(CONFIG_REGULATOR_MP5416) += mp5416.o
		obj-$(CONFIG_REGULATOR_MP8859) += mp8859.o
		obj-$(CONFIG_REGULATOR_MP886X) += mp886x.o
		obj-$(CONFIG_REGULATOR_MPQ7920) += mpq7920.o
		obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
		obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o