Commit 6d889d03 authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 

Board-level changes

This adds and extends support for specific boards on a number of
ARM platforms:  omap, imx, samsung, tegra, ...

* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (49 commits)
  Enable 32 bit flash support for iMX21ADS board
  ARM: mx31pdk: Add MC13783 RTC support
  iomux-mx25: configuration to support CSPI3 on CSI pins
  MX1:apf9328: Add i2c support
  mioa701: add newly available DoC G3 chip
  arm/tegra: remove __initdata annotation from pinmux tables
  arm/tegra: Use bus notifiers to trigger pinmux setup
  arm/tegra: Refactor board-*-pinmux.c to share code
  arm/tegra: Fix mistake in Trimslice's pinmux
  arm/tegra: Rework Seaboard-vs-Ventana pinmux table
  arm/tegra: Remove useless entries from ventana_pinmux[]
  arm/tegra: PCIe: Remove include of mach/pinmux.h
  arm/tegra: Harmony PCIe: Don't touch pinmux
  arm/tegra: Add AUXDATA for tegra-pinmux and tegra-gpio
  arm/tegra: Split Seaboard GPIO table to allow for Ventana
  ARM: imx6q: generate imx6q dtb files
  arm/imx6q: Rename Sabreauto to Armadillo2
  arm/imx6q-sabrelite: add enet phy ksz9021rn fixup
  arm/imx6: add imx6q sabrelite board support
  dts/imx: rename uart labels to consistent with hw spec
  ...
parents 7400c12e 421b759b

Documentation/devicetree/bindings/arm/fsl.txt

+6 −2
Original line number Diff line number Diff line
@@ -21,6 +21,10 @@ i.MX53 Smart Mobile Reference Design Board 
Required root node properties:

    - compatible = "fsl,imx53-smd", "fsl,imx53";



i.MX6 Quad SABRE Automotive Board

i.MX6 Quad Armadillo2 Board

Required root node properties:

    - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
 
    - compatible = "fsl,imx6q-arm2", "fsl,imx6q";



i.MX6 Quad SABRE Lite Board

Required root node properties:

    - compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";

arch/arm/boot/dts/imx51-babbage.dts

+8 −9
Original line number Diff line number Diff line
@@ -35,20 +35,19 @@ 
				};



				esdhc@70008000 { /* ESDHC2 */

					cd-gpios = <&gpio0 6 0>; /* GPIO1_6 */

					wp-gpios = <&gpio0 5 0>; /* GPIO1_5 */

					cd-gpios = <&gpio1 6 0>;

					wp-gpios = <&gpio1 5 0>;

					status = "okay";

				};



				uart2: uart@7000c000 { /* UART3 */

				uart3: uart@7000c000 {

					fsl,uart-has-rtscts;

					status = "okay";

				};



				ecspi@70010000 { /* ECSPI1 */

					fsl,spi-num-chipselects = <2>;

					cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */

						   <&gpio3 25 0>; /* GPIO4_25 */

					cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>;

					status = "okay";



					pmic: mc13892@0 {
@@ -57,7 +56,7 @@ 
						compatible = "fsl,mc13892";

						spi-max-frequency = <6000000>;

						reg = <0>;

						mc13xxx-irq-gpios = <&gpio0 8 0>; /* GPIO1_8 */

						mc13xxx-irq-gpios = <&gpio1 8 0>;

						fsl,mc13xxx-uses-regulator;

					};
@@ -91,12 +90,12 @@ 
				reg = <0x73fa8000 0x4000>;

			};



			uart0: uart@73fbc000 {

			uart1: uart@73fbc000 {

				fsl,uart-has-rtscts;

				status = "okay";

			};



			uart1: uart@73fc0000 {

			uart2: uart@73fc0000 {

				status = "okay";

			};

		};
@@ -127,7 +126,7 @@ 


		power {

			label = "Power Button";

			gpios = <&gpio1 21 0>;

			gpios = <&gpio2 21 0>;

			linux,code = <116>; /* KEY_POWER */

			gpio-key,wakeup;

		};

arch/arm/boot/dts/imx51.dtsi

+10 −10
Original line number Diff line number Diff line
@@ -14,9 +14,9 @@ 


/ {

	aliases {

		serial0 = &uart0;

		serial1 = &uart1;

		serial2 = &uart2;

		serial0 = &uart1;

		serial1 = &uart2;

		serial2 = &uart3;

	};



	tzic: tz-interrupt-controller@e0000000 {
@@ -86,7 +86,7 @@ 
					status = "disabled";

				};



				uart2: uart@7000c000 { /* UART3 */

				uart3: uart@7000c000 {

					compatible = "fsl,imx51-uart", "fsl,imx21-uart";

					reg = <0x7000c000 0x4000>;

					interrupts = <33>;
@@ -117,7 +117,7 @@ 
				};

			};



			gpio0: gpio@73f84000 { /* GPIO1 */

			gpio1: gpio@73f84000 {

				compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";

				reg = <0x73f84000 0x4000>;

				interrupts = <50 51>;
@@ -127,7 +127,7 @@ 
				#interrupt-cells = <1>;

			};



			gpio1: gpio@73f88000 { /* GPIO2 */

			gpio2: gpio@73f88000 {

				compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";

				reg = <0x73f88000 0x4000>;

				interrupts = <52 53>;
@@ -137,7 +137,7 @@ 
				#interrupt-cells = <1>;

			};



			gpio2: gpio@73f8c000 { /* GPIO3 */

			gpio3: gpio@73f8c000 {

				compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";

				reg = <0x73f8c000 0x4000>;

				interrupts = <54 55>;
@@ -147,7 +147,7 @@ 
				#interrupt-cells = <1>;

			};



			gpio3: gpio@73f90000 { /* GPIO4 */

			gpio4: gpio@73f90000 {

				compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";

				reg = <0x73f90000 0x4000>;

				interrupts = <56 57>;
@@ -171,14 +171,14 @@ 
				status = "disabled";

			};



			uart0: uart@73fbc000 {

			uart1: uart@73fbc000 {

				compatible = "fsl,imx51-uart", "fsl,imx21-uart";

				reg = <0x73fbc000 0x4000>;

				interrupts = <31>;

				status = "disabled";

			};



			uart1: uart@73fc0000 {

			uart2: uart@73fc0000 {

				compatible = "fsl,imx51-uart", "fsl,imx21-uart";

				reg = <0x73fc0000 0x4000>;

				interrupts = <32>;

arch/arm/boot/dts/imx53-ard.dts

+9 −9
Original line number Diff line number Diff line
@@ -29,8 +29,8 @@ 
		aips@50000000 { /* AIPS1 */

			spba@50000000 {

				esdhc@50004000 { /* ESDHC1 */

					cd-gpios = <&gpio0 1 0>; /* GPIO1_1 */

					wp-gpios = <&gpio0 9 0>; /* GPIO1_9 */

					cd-gpios = <&gpio1 1 0>;

					wp-gpios = <&gpio1 9 0>;

					status = "okay";

				};

			};
@@ -44,7 +44,7 @@ 
				reg = <0x53fa8000 0x4000>;

			};



			uart0: uart@53fbc000 { /* UART1 */

			uart1: uart@53fbc000 {

				status = "okay";

			};

		};
@@ -67,7 +67,7 @@ 
			compatible = "smsc,lan9220", "smsc,lan9115";

			reg = <0xf4000000 0x2000000>;

			phy-mode = "mii";

			interrupt-parent = <&gpio1>;

			interrupt-parent = <&gpio2>;

			interrupts = <31>;

			reg-io-width = <4>;

			smsc,irq-push-pull;
@@ -79,34 +79,34 @@ 


		home {

			label = "Home";

			gpios = <&gpio4 10 0>; /* GPIO5_10 */

			gpios = <&gpio5 10 0>;

			linux,code = <102>; /* KEY_HOME */

			gpio-key,wakeup;

		};



		back {

			label = "Back";

			gpios = <&gpio4 11 0>; /* GPIO5_11 */

			gpios = <&gpio5 11 0>;

			linux,code = <158>; /* KEY_BACK */

			gpio-key,wakeup;

		};



		program {

			label = "Program";

			gpios = <&gpio4 12 0>; /* GPIO5_12 */

			gpios = <&gpio5 12 0>;

			linux,code = <362>; /* KEY_PROGRAM */

			gpio-key,wakeup;

		};



		volume-up {

			label = "Volume Up";

			gpios = <&gpio4 13 0>; /* GPIO5_13 */

			gpios = <&gpio5 13 0>;

			linux,code = <115>; /* KEY_VOLUMEUP */

		};



		volume-down {

			label = "Volume Down";

			gpios = <&gpio3 0 0>; /* GPIO4_0 */

			gpios = <&gpio4 0 0>;

			linux,code = <114>; /* KEY_VOLUMEDOWN */

		};

	};

arch/arm/boot/dts/imx53-evk.dts

+8 −9
Original line number Diff line number Diff line
@@ -29,15 +29,14 @@ 
		aips@50000000 { /* AIPS1 */

			spba@50000000 {

				esdhc@50004000 { /* ESDHC1 */

					cd-gpios = <&gpio2 13 0>; /* GPIO3_13 */

					wp-gpios = <&gpio2 14 0>; /* GPIO3_14 */

					cd-gpios = <&gpio3 13 0>;

					wp-gpios = <&gpio3 14 0>;

					status = "okay";

				};



				ecspi@50010000 { /* ECSPI1 */

					fsl,spi-num-chipselects = <2>;

					cs-gpios = <&gpio1 30 0>, /* GPIO2_30 */

						   <&gpio2 19 0>; /* GPIO3_19 */

					cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;

					status = "okay";



					flash: at45db321d@1 {
@@ -61,8 +60,8 @@ 
				};



				esdhc@50020000 { /* ESDHC3 */

					cd-gpios = <&gpio2 11 0>; /* GPIO3_11 */

					wp-gpios = <&gpio2 12 0>; /* GPIO3_12 */

					cd-gpios = <&gpio3 11 0>;

					wp-gpios = <&gpio3 12 0>;

					status = "okay";

				};

			};
@@ -76,7 +75,7 @@ 
				reg = <0x53fa8000 0x4000>;

			};



			uart0: uart@53fbc000 { /* UART1 */

			uart1: uart@53fbc000 {

				status = "okay";

			};

		};
@@ -102,7 +101,7 @@ 


			fec@63fec000 {

				phy-mode = "rmii";

				phy-reset-gpios = <&gpio6 6 0>; /* GPIO7_6 */

				phy-reset-gpios = <&gpio7 6 0>;

				status = "okay";

			};

		};
@@ -113,7 +112,7 @@ 


		green {

			label = "Heartbeat";

			gpios = <&gpio6 7 0>; /* GPIO7_7 */

			gpios = <&gpio7 7 0>;

			linux,default-trigger = "heartbeat";

		};

	};

CRA Git | Maintained and supported by SUSTech CRA and CCSE