Commit 6d6ce40f authored by Tony Lindgren's avatar Tony Lindgren Committed by Kishon Vijay Abraham I
Browse files

phy: cpcap-usb: Add CPCAP PMIC USB support 



Some Motorola phones like droid 4 use a custom CPCAP PMIC that has a
multiplexing USB PHY.

This USB PHY can operate at least in four modes using pin multiplexing
and two control GPIOS:

- Pass through companion PHY for the SoC USB PHY
- ULPI PHY for the SoC
- Pass through USB for the modem
- UART debug console for the SoC

This patch adds support for droid 4 USB PHY and debug UART modes,
support for other modes can be added later on as needed.

Both peripheral and host mode are working for the USB. The
host mode depends on the cpcap-charger driver for VBUS.

VBUS and ID pin detection are done using cpcap-adc IIO ADC
driver.

Cc: devicetree@vger.kernel.org
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Acked-by: default avatarRob Herring <robh@kernel.org>
Tested-by: default avatarSebastian Reichel <sre@kernel.org>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
Signed-off-by: default avatarKishon Vijay Abraham I <kishon@ti.com>
parent 4a3449d1

Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt

0 → 100644
+40 −0
Original line number Diff line number Diff line 
Motorola CPCAP PMIC USB PHY binding



Required properties:

compatible: Shall be either "motorola,cpcap-usb-phy" or

	    "motorola,mapphone-cpcap-usb-phy"

#phy-cells: Shall be 0

interrupts: CPCAP PMIC interrupts used by the USB PHY

interrupt-names: Interrupt names

io-channels: IIO ADC channels used by the USB PHY

io-channel-names: IIO ADC channel names

vusb-supply: Regulator for the PHY



Optional properties:

pinctrl: Optional alternate pin modes for the PHY

pinctrl-names: Names for optional pin modes

mode-gpios: Optional GPIOs for configuring alternate modes



Example:

cpcap_usb2_phy: phy {

	compatible = "motorola,mapphone-cpcap-usb-phy";

	pinctrl-0 = <&usb_gpio_mux_sel1 &usb_gpio_mux_sel2>;

	pinctrl-1 = <&usb_ulpi_pins>;

	pinctrl-2 = <&usb_utmi_pins>;

	pinctrl-3 = <&uart3_pins>;

	pinctrl-names = "default", "ulpi", "utmi", "uart";

	#phy-cells = <0>;

	interrupts-extended = <

		&cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0

		&cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0

		&cpcap 48 1

	>;

	interrupt-names =

		"id_ground", "id_float", "se0conn", "vbusvld",

		"sessvld", "sessend", "se1", "dm", "dp";

	mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH

		      &gpio1 0 GPIO_ACTIVE_HIGH>;

	io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>;

	io-channel-names = "vbus", "id";

	vusb-supply = <&vusb>;

};

drivers/phy/Kconfig

+1 −0
Original line number Diff line number Diff line
@@ -53,6 +53,7 @@ source "drivers/phy/amlogic/Kconfig" 
source "drivers/phy/broadcom/Kconfig"

source "drivers/phy/hisilicon/Kconfig"

source "drivers/phy/marvell/Kconfig"

source "drivers/phy/motorola/Kconfig"

source "drivers/phy/qualcomm/Kconfig"

source "drivers/phy/renesas/Kconfig"

source "drivers/phy/rockchip/Kconfig"

drivers/phy/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -16,6 +16,7 @@ obj-$(CONFIG_ARCH_TEGRA) += tegra/ 
obj-y					+= broadcom/	\

					   hisilicon/	\

					   marvell/	\

					   motorola/	\

					   qualcomm/	\

					   samsung/	\

					   st/		\

drivers/phy/motorola/Kconfig

0 → 100644
+11 −0
Original line number Diff line number Diff line 
#

# Phy drivers for Motorola devices

#

config PHY_CPCAP_USB

	tristate "CPCAP PMIC USB PHY driver"

	depends on USB_SUPPORT && IIO

	select GENERIC_PHY

	select USB_PHY

	help

	  Enable this for USB to work on Motorola phones and tablets

	  such as Droid 4.

drivers/phy/motorola/Makefile

0 → 100644
+5 −0
Original line number Diff line number Diff line 
#

# Makefile for the phy drivers.

#



obj-$(CONFIG_PHY_CPCAP_USB)		+= phy-cpcap-usb.o

CRA Git | Maintained and supported by SUSTech CRA and CCSE