Commit 6c763eb9 authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6 

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (27 commits)
  [PATCH] PCI: nVidia quirk to make AER PCI-E extended capability visible
  [PATCH] PCI: fix issues with extended conf space when MMCONFIG disabled because of e820
  [PATCH] PCI: Bus Parity Status sysfs interface
  [PATCH] PCI: fix memory leak in MMCONFIG error path
  [PATCH] PCI: fix error with pci_get_device() call in the mpc85xx driver
  [PATCH] PCI: MSI-K8T-Neo2-Fir: run only where needed
  [PATCH] PCI: fix race with pci_walk_bus and pci_destroy_dev
  [PATCH] PCI: clean up pci documentation to be more specific
  [PATCH] PCI: remove unneeded msi code
  [PATCH] PCI: don't move ioapics below PCI bridge
  [PATCH] PCI: cleanup unused variable about msi driver
  [PATCH] PCI: disable msi mode in pci_disable_device
  [PATCH] PCI: Allow MSI to work on kexec kernel
  [PATCH] PCI: AMD 8131 MSI quirk called too late, bus_flags not inherited ?
  [PATCH] PCI: Move various PCI IDs to header file
  [PATCH] PCI Bus Parity Status-broken hardware attribute, EDAC foundation
  [PATCH] PCI: i386/x86_84: disable PCI resource decode on device disable
  [PATCH] PCI ACPI: Rename the functions to avoid multiple instances.
  [PATCH] PCI: don't enable device if already enabled
  [PATCH] PCI: Add a "enable" sysfs attribute to the pci devices to allow userspace (Xorg) to enable devices without doing foul direct access
  ...
parents dcc1a66a cf34a8e0

Documentation/pci.txt

+11 −3
Original line number Diff line number Diff line
@@ -213,9 +213,17 @@ have been remapped by the kernel. 


   See Documentation/IO-mapping.txt for how to access device memory.



   You still need to call request_region() for I/O regions and

request_mem_region() for memory regions to make sure nobody else is using the

same device.

   The device driver needs to call pci_request_region() to make sure

no other device is already using the same resource. The driver is expected

to determine MMIO and IO Port resource availability _before_ calling

pci_enable_device().  Conversely, drivers should call pci_release_region()

_after_ calling pci_disable_device(). The idea is to prevent two devices

colliding on the same address range.



Generic flavors of pci_request_region() are request_mem_region()

(for MMIO ranges) and request_region() (for IO Port ranges).

Use these for address resources that are not described by "normal" PCI

interfaces (e.g. BAR).



   All interrupt handlers should be registered with SA_SHIRQ and use the devid

to map IRQs to devices (remember that all PCI interrupts are shared).

arch/i386/kernel/acpi/boot.c

+2 −0
Original line number Diff line number Diff line
@@ -202,6 +202,8 @@ int __init acpi_parse_mcfg(unsigned long phys_addr, unsigned long size) 
		if (mcfg->config[i].base_reserved) {

			printk(KERN_ERR PREFIX

			       "MMCONFIG not in low 4GB of memory\n");

			kfree(pci_mmcfg_config);

			pci_mmcfg_config_num = 0;

			return -ENODEV;

		}

	}

arch/i386/pci/common.c

+1 −0
Original line number Diff line number Diff line
@@ -288,6 +288,7 @@ int pcibios_enable_device(struct pci_dev *dev, int mask) 


void pcibios_disable_device (struct pci_dev *dev)

{

	pcibios_disable_resources(dev);

	if (pcibios_disable_irq)

		pcibios_disable_irq(dev);

}

arch/i386/pci/i386.c

+9 −0
Original line number Diff line number Diff line
@@ -242,6 +242,15 @@ int pcibios_enable_resources(struct pci_dev *dev, int mask) 
	return 0;

}



void pcibios_disable_resources(struct pci_dev *dev)

{

	u16 cmd;



	pci_read_config_word(dev, PCI_COMMAND, &cmd);

	cmd &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY);

	pci_write_config_word(dev, PCI_COMMAND, cmd);

}



/*

 *  If we set up a device for bus mastering, we need to check the latency

 *  timer as certain crappy BIOSes forget to set it properly.

arch/i386/pci/mmconfig.c

+6 −3
Original line number Diff line number Diff line
@@ -15,7 +15,9 @@ 
#include <asm/e820.h>

#include "pci.h"



#define MMCONFIG_APER_SIZE (256*1024*1024)

/* aperture is up to 256MB but BIOS may reserve less */

#define MMCONFIG_APER_MIN	(2 * 1024*1024)

#define MMCONFIG_APER_MAX	(256 * 1024*1024)



/* Assume systems with more busses have correct MCFG */

#define MAX_CHECK_BUS 16
@@ -197,9 +199,10 @@ void __init pci_mmcfg_init(void) 
		return;



	if (!e820_all_mapped(pci_mmcfg_config[0].base_address,

			pci_mmcfg_config[0].base_address + MMCONFIG_APER_SIZE,

			pci_mmcfg_config[0].base_address + MMCONFIG_APER_MIN,

			E820_RESERVED)) {

		printk(KERN_ERR "PCI: BIOS Bug: MCFG area is not E820-reserved\n");

		printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %x is not E820-reserved\n",

				pci_mmcfg_config[0].base_address);

		printk(KERN_ERR "PCI: Not using MMCONFIG.\n");

		return;

	}

CRA Git | Maintained and supported by SUSTech CRA and CCSE